Used processing

MGB SL12 12″ SCREEN CHANGER 17616

21409-11 One (1) used MGB Model SC12 slide plate screen changer having two (2) nominal 12″ diameter breaker plates. Unit is mounted on a stand with casters supplying approximately a 42″ discharge height. Package ...

BERLYN 2″ 30:1 L/D 40 18399

One (1) Used 2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- and water-cooled barrel at approximately a 42″ center line height. S/N 025D379. Gearbox is a ...

EXTEK HSC-35 3.5″ SCREEN CHANGER 18361

One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35161. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...

EXTEK HSC-35 3.5″ SCREEN CHANGER 18362

One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35160. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...

GLOUCESTER COOLING ROLL STACK 18352

One (1) used Gloucester heavy duty cooling and polishing stand having three (3) 55″ face x 24″ diameter chrome plated rolls mounted in a 45-degree angle arrangement for down stack operation at a 62″ center line h...

CLOEREN / PRODUCTION COMPONENTS 58″ 18338

One (1) used Cloeren / Production Components model Master-flex HD-40 sheet die with a 58″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...

PRODUCTION COMPONENTS 54″ SHEET DIE 18327

One( 1) used Production Components Master Flex HD-40 sheet die with a 54″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coa...

CLOEREN 42.5″ SHEET DIE 18330

One (1) used Cloeren sheet die with a 42.5″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. 3/4″ back c...

CLOEREN 30″ SHEET DIE 18334

One (1) used Cloeren sheet die with a 30″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. 3/4″ back cen...

HARTIG 2.5″ 24:1 L/D 50 18342

One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...

TRENDLEKAMP 8″ CONTINUOUS SCREEN CHANGER 18303

One used Trendlekamp model TASK8.1 dual bolt 8″ continuous screen changer. Includes support stand and hydraulic pumping unit. Manufactured in 2004

GLOUCESTER SHEET STACKER 18229

One (1) used Gloucester cut sheet stacking system. Package consists of a nominal 72″ wide x 9′ long belt conveyor with 72″ wide pneumatic sheet stacker. Last used on the end of an HDPE sheet extrusion line. ¾ hp ...

ZENITH 10 HP MELT PUMP 18234

• Manufacturer: Zenith

Zenith model 60-20000-24-2410-4 melt pump. S/N 250603. 10 HP 230/460-volt pump motor. 1 to 70.26 RPM speed range. 3/4″ entry and 2″ entry

GLOUCESTER 66″ COOLING ROLL STAND 18226

One (1) used 66″ Gloucester cooling and polishing stand having three (3) nominal 20″ diameter chrome plated rolls mounted in a vertical arrangement for down stack operation at a 56″ center-line height. Includes t...

KILLION KN-150 1.5″ 30:1 L/D 18111

One used Killion model KN-150 1.5″ 30:1 extruder. S/N 15437. Five (5) zone electrically heated, air cooled, and top-vented barrel at an approximate 39″ centerline height. Gearbox is a Koellmann model PEZS20 and h...