Used processing in Belgium

Permeameter SIMPSON

• Manufacturer: Simpson

Dimensions: Length: 260mm; Width: 330mm; Height: 430mm 220V;50Hz;0,1A Suitable for the following processes: Cold Box Core oil Clay-bonded sand Hot Box Nobake/Air blower Shell/Croning (sand for cast mould shells a...

Screw mixer MAVEREX, 1 t/h, fixed

Furansand screw mixer 2 t/h Colt Set Process, 1 t/h CO2 Process Entry height: 1900 mm, discharge height: 1300 mm Fixed, with 1 gear wheel pump, 1 membrane pump adjustable from hand With command pannel with relays...

Laborary induction refond plant LINN

• Manufacturer: Linn Hight Therm

5,5KW; 380V Metal refond plant (ex: steel chips, blasting steel granule or other smal metal parts) per inductionn by vacuum and centrifuge process to producespectrometer specimens for analysing water-cooler with ...

2006 Decoving machine MASDIM

With 2 pneumatic hammers With 2 vibrating motors to shake out the sand With electric control by PLC ALLEN BRADLEY With noise protection cabin With full automatic process With sand extraction belt

Nobake moulding plant IMF

± 150 m rolling conveyor 4 x transfer wagons Mixer IMF, 30 t/h, equipped for furan process ROLLOVER with mould/pattern separation Mould manipulator IMF for overhead crane Painting station Pattern Fastloop

Cast iron surface plates

• Manufacturer: Cast iron surface plates

Cast iron surface plates

Permeability tester GF, type SPDU

• Manufacturer: GF

External dimensions: Width 400 mm, Depth: 230 mm, Height 480 mm

Automatic core shooter LAEMPE L10

• Manufacturer: Laempe / Röperwerk

All movements are hydraulic with hydraulic unit Vacuum side clamping, plates 700 mm x 200 mm Core extraction slide 380 mm x 300 mm With gassing plate Maximum core box dimensions: width ± 700 mm, depth ± 650 mm, h...

Degassing unit (impeller) BOMA

• Manufacturer: BOMA

Dimensions: Length: 2300 mm; Width: 900 mm; Height: 2980 mm Minimum height under arm: 1400 mm; maximum: 2600 mm 2.5 kW, 400 V; 16 A; 50 Hz With blade With CE certification With Siemens S5 control system On a trol...

2000 Mobile hydraulic wedge station HOLMATRO

• Manufacturer: Holmatro

Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer

2000 Mobile hydraulic wedge station HOLMATRO

• Manufacturer: Holmatro

Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer

2009 Amine Gas Washer BGT, 9000 m³/h

• Manufacturer: BGT

Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm

2007 Manipulator CLANSMAN, Type C620RB

• Manufacturer: CLANSMANN

Payload: 500kg | Max opening of the tongs: ±1000m | Horizontal speed: 0.9m/s | Vertical speed: 1m/s | Swivelling speed: 60°/s | Hydraulic power: 22kW

Sand silo, divided in 2; ±6m³

Silo divided into 2 with 2 separate outlets On 3 feet

Magnetic steerer RETSCH with heating

• Manufacturer: Retsch

Dimensions: Length: 150mm; Width: 200mm; Height: 120mm 630W; 220/240V; 50Hz; Temperature adjustable with rotary button