Used processing in Wallonia, Belgium

1993 Induction furnace INDUCTOTHERM Dual Trak 2 x 2t

• Manufacturer: Inductotherm

With hydraulic unit With water pumping station With switch cabinet VIP ( 3404 x 2278 x H 2032mm) With 2 furnace chairs, each 2 tonnes capacity With hydraulic ejector With transformer (pri. 21.000V; sec. 598V) 150...

Alu melting furnace Morgan tiltable ±700 kg natural gas

• Manufacturer: Morgan

Exterior dimensions: Width: 2320mm; Depth: 1850mm; Height: 2020mm Dimensions platform: Width: 2700mm; Depth: 2350mm; Height: 2400mm with keeping level with new lining with charging platform and stairs wit natural...

1998 Induction furnace INDUCTOTHERM, 250 kg, 150 kW, 1000 Hz

• Manufacturer: Inductotherm

Dimensions: - control board: length 1900 mm, width 770 mm, height 2000 mm - furnace body: length 1600 mm, width 1400 mm, height 1400 mm - cooling system: length 2000 mm, width 1200 mm, height 850 mm One body with...

Hydraulic cylinder to eject the furnace lining

External dimensions: length 2300 mm, width 370 mm, height 570 mm 2 x 2 fixing holes, Ø 50 mm With 4 lifting eyes With long hydraulic hose

1989 Fixed electric melting furnace HINDENLANG, 300 kg aluminium

• Manufacturer: Hindenlang

Melting furnace for aluminium or brass Crucible typ BU 300 With pivoted cover With temperature sensors Advantage: the heating resistors can be changed from the outside without moving the crucible

Shaking device for ladles and furnaces, Ø 600 mm to 900 mm

Small grantry crane to put on top of ladle or furnace equipped with electric winch, max. capacity 700 kg to move inside of the lining former on support plate with 3 pneumatic hammers

Induction melting furnace INDUCTOTHERM, 250 kg

• Manufacturer: Inductotherm

With 2 furnaces for alternativ working With transformer With hydraulic With cooling tower With water pump With control board

1990 Tilting crucible furnace HINDENLANG, aluminium, gaz heated, 800 kg

• Manufacturer: Hindenlang

Tiltable furnace HINDENLANG, melting and warm holding Electric control board With stage and extractor hood With exhaust gas stack

Induction furnace INDUCTOTHERM 200 kg, push-out

• Manufacturer: Inductotherm

- 1x VIP power desk - 1x pump station with 2 pumps - 1x cooling tower and spare cooling tower - crucible manipulation system - smoke suction measurement and recorder

Annealing furnace electric ELTI, max 700°C

• Manufacturer: ELTI

Type: CFZ, Serial number: 3150 Outside dimensions: width 1750mm; depth1800mm, height 2500mm Max temperature 700°C With 2 blowers/ aerators on the top (220/380V) With vertical pneumatic door With 7 roles inside an...

1987 Treatment furnace, electricTHERMCO, 750 °C

• Manufacturer: Thermco Systems

Type: FTT750, serial number: 86456 Year: 1987, weight: 1800 kg With 1 ventilater- aerater behind (1.5 kW; 220/380 V; 1400 rpm) With 1 charging basket on wheels, 1300 mm x 580 mm x 500 mm Manual hand lift door wit...

Waterconnections for induction furnace

Water entry DIN100 Water output 5xØ50mm With thermometer and probes of various pipes With small switch box On frame for fastening on the wall

Laboratory treatment furnace 1000°C HERAEUS

• Manufacturer: Heraeus - Hanau - Vötsch

With thermostat and thermometer In overhauled condition

Vibrating conveyor for loading induction furnaces 3 t it's overhauled

With protective grating all round the conveyor Can be moved in four directions via brake motor SEW Already overhauled

Gas heated annealing furnace CFI, 950 °C, 3600 mm x 1500 mm x 1410 mm

With two mobile hearth bogies and two charging doors 33 kW, 220 V, 88 A Doors activated via pneumatic pistons Fiber isolation renewed 6 months before closure