Used processing in Wallonia, Belgium

Alu melting furnace tiltable MORGAN, ± 600 kg, gas heated

• Manufacturer: Morgan

Engine brand ALMO, 2,2 kW; 1435 rpm; 230/ 400 V Gas burner ELCO, type EK 3.60 G-ZWA20 200 - 600 kW; 20 - 70 m³/h of natural gas With stairs With control box With hydraulic unit With crucible Ø 670 mm, height 900 mm

Laboratory drying furnace VEB, type 983

As good as new Useful dimensions: Ø 500 mm, depth: 350 mm With 3 shelves Thermostat max. 250°C

Alu melting furnace STRIKO, gas fired, content 1000 kg

• Manufacturer: Striko

Furnace for natural gas with 2 burners for melting chamber and 1 for holding and casting chamber With hydraulic tilting, with loading skip, with control box, with chimney With gas installation KROMSCHRÖDER Conten...

1991 Fuel heated rotary furnace SOGEMI 3 t, OXYGAZ, tiltable

Fuel heated rotary furnace hydraulic station for loading and repairing lining With burner oxygen-gas 1,5 MW (1500 kW) With hydraulic group, with chassi for failover With control cabinet

1981 Pouring furnace JUNKER 1200 kg

• Manufacturer: Junker

Weight:: ± 12000 kg 180 KVA, 380 V Pouringfurnace capacity 1200 kg, with plug and channel Control voltage 220 V, nominal voltage 380 V Water-cooled induction channel, compressed air casting pressure, pneumatic st...

1981 Melting and holding furnace for 200 kg copper alloy, KOPO, fixed (static)

Type: S.200, serial number: 63 With 9 new heating elements in silicone carbide Melting capacity in copper alloy, consumption 0,3 kWh/kg For crucible A200

Furnace loading conveyor UHDE

Motor UHDE type SM20/4, 1,1 kW, 220 V, 1410 rpm Loading bunker upside 1600 mm x 1500 mm, h.1400 mm Rotation on ball bearing supported ring

Steel scrap feeding device KÜTTNER for furnace

• Manufacturer: Küttner

With 2 vibrating motors UHDE, type SM20/4 On mobile peadestal Center distance: 1330 mm, driven by drum motor BAUER; 1,5 kW; 220/380 V Wth loading shank taper 1500 mm x 2000 mm

Cupola furnace sprayer SAS 3E

Type: 3 E, Serial number: S126 In good condition With tube, on 3 wheels

Vibrator for furnaces and ladles f. side-lining

220/380 V, 2,6/1,5 A 3 vibration engines BOSCH With cylinder and pneumatic control by hand Opening Ø 1100 mm - 1600 mm

Laboratory annealing furnace, 150 mm x 240 mm x 85 mm, 1200 °C

• Manufacturer: STUART SCIENTIFIE

Type: R000 1000/23, weight: 50 kg With regulation and digital reading

1990 6 condensators for furnace, ROEDERSTEIN

Motor KVAR 250, type 553NF, 1200 V, 50 Hz, 208 A Weight: ± 50 kg/pc | Outside dimensions: 1000 mm x 580mm, h. 160 mm

2000 Fixed holding and melting furnace, gas, for 200 kg aluminium, METAFOUR

Type: GN70AL GD, serial numbers: 1221 Construction year: 2000, weight: 1500 kg Inside Ø crucible: on top 450 mm, below 420 mm, type BU 200, support Ø 300 mm With temperature probe and control system With atmosphe...

Laboratorium treatment furnace HERAEUS, max. 1000 °C

• Manufacturer: Heraeus - Hanau - Vötsch

Type: MR170E, serial number: 8201585 3 kW, 220 V mono With thermometer und thermostat

Electrical treatment furnace POTTERYCRAFTS, 74 cm x 44 cm x 65 cm, 1300 °C, CE

Type: 0210, serial number: 6.544 11 kW, 220 /380 V With control cabinet: main switch, switch for opening the door, new Jumo digital readout control, new sensor