Used processing

CUMBERLAND 1420 GRANULATOR 16023

• Manufacturer: Cumberland

Cumberland model 1420 granulator. S/N none. 14″ x 20″ feed throat, 3 knife rotor, 2 bed knife. Approximately 20HP motor. No in-feed hopper barrel base discharge with 3/8″ clearance and 26.75″ wide x 24″ deep barr...

CONAIR 304 20KN PELLETIZER 19045

• Manufacturer: Conair

Conair model 304 pelletizer. S/N 6-040286. 20 knife helical rotor. Single bed knife. 3.5″ wide strand inlet. Driven by a A/C 2 HP 460-volt 1745 RPM motor. Mounted on casters.

PALLMAN PKM450 PULVERIZER 19038

• Manufacturer: Pallmann

Pallman model PKM450 pulverizer. S/N 1055.00.045. 2001 model year. 75 HP 230/460-volt 1785 RPM main drive motor. Rated at 550-770 lbs. per hour. Includes Eriez 4″ x 20″ vibratory feeder and 10 HP blower type AMXE...

CUMBERLAND FX1628 GRANULATOR SYSTEM 19037

• Manufacturer: Cumberland

Used Cumberland model FX1628 granulator. S/N FX1628-21010. 16″ x 28″ feed throat with offset cutting chamber. 3 knife dual flywheel open rotor with two bed knives. 6″ OD airveyor discharge. Belt driven by a 30 HP...

CUMBERLAND 1824 GRANULATOR 18983

• Manufacturer: Cumberland

Cumberland model 1824 granulator, S/N 36810-99502, 18″ x 24″ feed throat, 3 knife open rotor with two bed knives. Tangential cutting chamber. 40 HP 460-volt motor. Insulated tray in-feed hopper. Insulated body pa...

NELMOR RG2257 GRANULATOR 18996

• Manufacturer: Nelmor

Nelmor model RG2257 granulator. 22″ x 57″ feed throat. 5 knife (15 pcs) open rotor with 2 bed knife positions (6 pcs). Top in-feed. 150 HP 460-volt 1785 RPM Bador Super-E motor. 10″ OD right hand airveyor dischar...

NEW CUMBERLAND 1837B GRANULATOR 50510-23002

• Manufacturer: Cumberland

New Cumberland 1837B granulator, S/N 50510-23002, 2024 model year, 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife, 100 HP 230/460-Volt 1800 RPM motor, conveyor in-feed hopper, belt drive, 6″ right h...

PALLMAN 4-7.5 RUBBER GRANULATOR 18882

• Manufacturer: Pallmann

Pallman “Ultra-Granulator” type PS, series C knife mill. Model 4-7.5. 20″ x 29.5″ feed throat entrance (510 mm x 750 mm). 400 mm diameter guillotine style rotor with three (3) rotating knives and two (2) fixed be...

GALA #5 PELLETIZING SYSTEM 18892

One used Gala Underwater Model 5 Pelletizing system. S/N 880286. Includes #5DMUP cutter head with die and water box, free standing panel with controls and 20 GPM water system with Model 8.2 spin dryer. Manufactur...

CUMBERLAND 1456i CUTTING CHAMBER ONLY 18871

• Manufacturer: Cumberland

One used Cumberland model 1456i cutting chamber only. S/N 84000-02001. 14″ x 56″ feed throat. Three (3) knife twin shear rotor having six (6) fly knives and four (4) bed knives. Solid v-belt pulley mounted on the...

REDUCTION ENGINEERING PULVERIZER 18836

• Manufacturer: Reduction Engineering

One (1) used Reduction Engineering model 75 single mill Pulverizer. S/N 235. Driven by a 30 HP 230/460-VOLT 3530 RPM motor. Includes Eriez vibratory feed, cyclone with 6″ inlet, and 2.5 HP 36″ Midwestern model MR...

REBUILT RAPID 400-60 DUAL FEED 18842

Rapid model 400/60 granulator. S/N RA-650.242239.10.1. 14″ x 24″ feed throat. 5 knife open rotor with 3 bed knives. 25 HP 460-volt 1800 RPM drive motor. Pre-cut type cutting chamber. Dual Rapid RFL18 feed roll in...

CUMBERLAND 1524B GRANULATOR 18793

• Manufacturer: Cumberland

Cumberland model 1524B granulator. S/N 58500-802. 15″ x 24″ cutting chamber. 3 knife steep angle rotor with 2 bed knives. 40 HP 230/460-volt 1775 RPM motor. Top feed box hopper with blow in. 6″ OD airveyor discha...

REBUILT CONAIR HD-2028 GRANULATOR 18784

• Manufacturer: Conair

Conair model HD-2028 granulator. S/N 71438. 20″ x 28″ feed throat. 3 knife high shear open rotor with two bed knives. 50 HP 230/460-volt motor. Conveyor style in-feed hopper with an in-feed height of 81.5″. 6″ OD...