Used processing in New Jersey, USA

Nickel - IPP# 216149

• Manufacturer: International Process Plants

Nickel 200 One set (2) shafts for bromide pump New on pallet 3.25" x 43" long each, with bolting flanges.

- IPP# 213602

Temperature Control unit, skid mounted used to control Glycol flow and temperature to reactor jackets. Includes all automatic valves, block valves and piping. Pumping capacity is maximum 100 gpm at 100 ft./hd. An...

Stainless Steel 316 - IPP# 212625

• Manufacturer: Micro motion

0.25 inch, 316 SS tube, Micro motion flow meter, Model #D SO12S105. Serial #134182. Rated for -240 to 204 degrees Celsius. 0.25 inch NPT female connections. Flow rates maximum 11 lbs/min. to minimum, .55 lbs./min...

- IPP# 211945

Martens Fluidor type BCS 650B beverage carton squeezing/crushing machine, machine is designed to separate beverages, juices and other aseptic liquids from their carton packages, full cartons drop onto the conveyo...

Carbon Steel - IPP# 210237

UNUSED 4" Carbon Steel, One lot of misc. pipe flanges and fittings. Contains the following Pieces: Eight 4" 150 lb. weld neck flanges, Four: 4" 150 lb. back up flanges, One 4" weld neck "T", Two 4" stub ends, Two...

Machine Tools - IPP# 220328

electric bandsaw

Akron Electric Heated Spray Washer - IPP# 209680

Akron Electic Heated spray washer Catalog Number AXJ12186

Gear Reducer 22.2 kW (29.8 HP) Carbon Steel - IPP# 239468

• Manufacturer: Falk

Out put RPM= 56

Gear Reducer 11.9 kW (16 HP) Carbon Steel - IPP# 93949

• Manufacturer: Reeves

variable speed drive flange mtd. 3/50/500 volt, 1450 rpm 13" ID, 17 1/2" OD, (8) 3/4" dia holes. 8" long stub shaft w/removable coupling.

Gear Reducer Carbon Steel - IPP# 705266

• Manufacturer: Renold

Additional Info:

Gear Reducer Carbon Steel - IPP# 705265

• Manufacturer: Holroyd

Unit for fermentor agit drive.

Gear Reducer SEW-Eurodrive KA97DV132M4TH - IPP# 230522

• Manufacturer: SEW-Eurodrive

Agitator Gear Motor Assembly, 300 - 1300 rpm input, Output is 13 - 300 rpm Service Factor 2.7, Torque 13873 lb-in. SO number 890226484.09.09.001. Direct coupled to a 10 HP SEW-Eurodrive motor, 3/60/230/460 volt m...

Gear Reducer 111.9 kW (150 HP) - IPP# 22792

4800 rpm input, 1200 rpm output. SN H2311; SF 1.1. Unit mounted on base.

Gear Reducer - IPP# 220419

• Manufacturer: SEW-Eurodrive

Germany weight 20.95 kg, no motor.

Gear Reducer - IPP# 220412

• Manufacturer: ESSO

variable hydraulic speed drive with 2.5 kW LOHER motor 3/50/380 volt, 1420 rpm, ex proof (T3)