- Trusted Seller
Karlsbad, Germany - Trusted Seller
1983 hydraulic Die-Spotting Press Reis TUS 125 OK-50
- Manufacturer: Reis
- Model: TUS-125
pressure 50to, whell away & tiltable table hydraulic ejector, upper plate moveable
Heilbronn, Germany - Trusted Seller
2004 RAS FLEXIbend 73.40
- Manufacturer: RAS
- Model: FLEXIbend 73.40
Swivel bending, CNC, J-stop - 5 axes simultaneous RAS CNC control system 6000 for CNC control of upper beam, folding beam, backgauge, folding beam adjustment and lower beam adjustment. Simple input of all necessa...
Metzingen, Germany - Trusted Seller
2012 SCHECHTL KS 200
- Manufacturer: Schechtl
- Model: KS 200
Swivel bend. Manual, simple Sheet thickness (mm): 1 | Sheet width (mm): 2000 | Work area: 2.000 x 1 mm
Metzingen, Germany - Trusted Seller
1980 REIS TUS 60
- Manufacturer: Reis
- Model: TUS-60
Spotting press with extendable table and swing out top plate
Metzingen, Germany - Trusted Seller
1970 REIS TUS 60 OK
- Manufacturer: Reis
- Model: TUS-60
Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570
Metzingen, Germany - Trusted Seller
2001 REIS TUS 60 - 40
- Manufacturer: Reis
- Model: TUS-60
Control SIEMENS S7-200 Swivel device 180° Centered ejector table Control device for tool cylinder Excellent, almost new condition.
Gammertingen, Germany 
Sheet metal benders
- Manufacturer: Zako Skotnice
Length: 3 – 8m | Strength: 1mm/2mm/3mm | Depth(width): 1m or 1.25m | Bend angle: 145° / 165° | Bending beam: Geometry according to customer requirements | Delivery time: about 4 months or depending on the a...
Steißlingen, Germany
Unrolling and splitting systems
- Manufacturer: Zako Skotnice
Can be ordered in different sizes and configurations, as well as with automated coil storage!
Steißlingen, Germany
1984 EDEL Stanzprofi 400 #1052-01021
- Manufacturer: Edel
- Model: STANZPROFI 400
Accessories tool cabinet with various punches and dies
Bühl, Germany
2025 ARKU RM 1825
- Manufacturer: Arku
- Model: RM 1825
Part leveler and strip leveler - Maximum vertical roller spacing: 8 mm - Circulating oil lubrication of the drive shafts and leveling roller bearings - Infeed/outfeed table - Speed ??control via handwheel - Strip...
Sinsheim, Germany
1994 CAMU SC 615 M
- Manufacturer: CAMU
with drive Manual central spreading Brake motor Motor has only one on/off switch The reel runs
Sinsheim, Germany
Mössner Cast plate production for semi-finished product manufacturers
- Manufacturer: Mössner - Rekord
Mössner's plate production for cast slabs enables fully automated sawing of slabs into plates and, if required, milling and foiling on both sides. In order to be able to react flexibly to their customers’ individ...
Eschach, Germany
1987 REIS TUS 200 OK 400
- Manufacturer: Reis
- Model: TUS
Press force: 400 t | Stroke: 2600 mm | Distance between columns: 2000 mm | Side window: 1500 mm | Daylight table - ram (stroke up): 2500 mm | Surface of table: 2500 x 2000 mm | Table height above floor: 1120 mm ...
Eislingen, Germany
1988 REIS TUS 70 OK 70
- Manufacturer: Reis
- Model: TUS-70
Press force: 70 t | Stroke: 900 mm | Distance between columns: 750 mm | Side window: 600 mm | Daylight table - ram (stroke up): 900 mm | Surface of table: 1000 x 700 mm | Table height above floor: 680 mm | Surfa...
Eislingen, Germany
Tip: Enter manufacturer, model or keyword