Used Correa Processing in New Jersey, USA

Dryer Flaker Drum and Belt North American Process Systems N-86-639 Stainless Steel 316 - IPP# 201241

• Manufacturer: North American Process Systems

Pharmaceutical grade Top of belt is steam heated bottom is chilled water cooled variable speed, 0.75 kW 3/50/220/380V System equipped with SIHI cooling water vacuum pump driven by 2.5 kW 3/50/380V, 1430 RPM motor.

Screw Conveyor by Thomas & Muller 14.75 Diameter Cooling Screw Stainless Steel 304 - IPP# 246772

• Manufacturer: Correa

Rated 2000 lbs./Hr. at 40 lbs./Cu.Ft. Two-(2) 5' 9 &3/8 cooling sections.

Dryer-Flaker Drum and Belt 28 mm (1.1 in) - IPP# 70983

• Manufacturer: Correa

chrome plated single drum flaker Drum pressure 0.42 bar DC thyristor controlled varispeed drive. Roll speed 10-100 rpm. Heating low pressure steam system of 0.1 bar. Doctor manual adjustable knife made of carbon ...

Dryer-Flaker Drum and Belt 300 mm (11.8 in) Stainless Steel 316 - IPP# 706870

• Manufacturer: Correa

301/321/316 stainless steel pilot scale horizontal belt flaker system with a pastillator size 300 x 4000mm fabrik #02.331 CE #2.02032, 321 stainless steel belt is driven by a 2.2kw motor via a 1.35kw 316 stainles...

Stainless Steel Dryer-Flaker Drum and Belt - IPP# 228256

• Manufacturer: Berndorf belt systems

belt flaker, with Accu-Drop Pastillator and Variable Speed Drive Belt system is 60" wide x 75 feet long. With six (138" x 59" x 5'5") water collectors 190 Gallon rated for 55 degrees F Six water spray systems, 11...

Belt Conveyor 400 mm (15.7 in) - IPP# 706644

• Manufacturer: Easikit

400mm wide, portable inclined, motor via gearbox, built on /off switch, mounted on wheels

Dryer-Flaker Drum and Belt 1,067 mm (42 in) - IPP# 49609

chrome plated drum only Cast iron construction

Stainless Steel 304 Steel Belt Systems Dryer-Flaker Drum and Belt - IPP# 229478

• Manufacturer: Steel Belt Systems

approx 28.8 square meter 301 (NICRO 12.1)/304 stainless steel enclosed horizontal belt flaker with Pastillator 1.5m wide x 18000mm cooling length 301 (NICRO 12.1) stainless steel belt 19250mm belt length between ...

Dryer-Flaker Drum and Belt 300 mm (11.8 in) - IPP# 704614

• Manufacturer: R.Simon Dryers

face chrome plated single drum flaker/dryer Drum working pressure 5.5 bar, speed 3 to 21 rpm, cored for steam/hot oil heating

Carbon Steel Dryer-Flaker Drum and Belt - IPP# 239473

• Manufacturer: Bethlehem Corp

Universal Twin Cylinder 12" x 8" lab sized dryer, flaker.

Dryer-Flaker Drum and Belt 1,200 mm (47.2 in) Stainless Steel - IPP# 203809

• Manufacturer: Kaiser Steel Belt System

with Type ZN stainless steel dosing system (tube needle system) can be heated rated 100 to 200 KG/Hr Unit has an endless belt 1.2 meter wide, 1mm thick,x 11.14 meter total length, 4 Meter working area with 1.4541...

Dryer-Flaker Drum and Belt 1,200 mm (47.2 in) Stainless Steel - IPP# 203810

• Manufacturer: Kaiser Steel Belt System

ZN stainless steel dosing system (tube needle system) can be heated, rated 100 to 200 KG/Hr. Unit has an endless belt Unit has an endless belt, 1.2 meter wide, 1mm thick,x 11.14 meter total length, 4 Meter workin...

Dryer-Flaker Drum and Belt 1,200 mm (47.2 in) Stainless Steel - IPP# 203808

• Manufacturer: Kaiser Steel Belt System

Pastillator with type: ZN stainless steel dosing system (tube needle system) can be heated, rated: 100 to 200 kg/hr, unit has an endless belt 1.2 meter wide, 1 mm thick x 11.14 meter total length 4 meter working ...

Dryer-Flaker Drum and Belt 203.2 mm (8 in) - IPP# 34426

• Manufacturer: Stokes

Stokes 2-roll chrome plated flaker Has cored rollers for heating and cooling Has knife discharge Fixed roll spacing Masters gearhead varispeed motor UL labelled motor

Dryer-Flaker Drum and Belt 1,524 mm (60 in) Carbon Steel - IPP# 28792

• Manufacturer: Blaw Knox

Single drum flaker Grooved drums, 1/8" groove every 1" 316SS vac chamber housing. W/spare drum Roll face is grooved on 1' spacings