Used feeder

Feeder Incline/Cleated 59" DISCH

• Manufacturer: Correa

Stainless steel, inclined cleated conveyor. Equipped with 10" infeed height, 24" wide blue belt conveyor belt with 18" wide x 2" high cleats set on 9¾" centers. Conveyor has 32" long bottom horizontal run, 68" lo...

Dorner Feeder Incline/Cleated SEC3A

• Manufacturer: Dorner

Dorner, inclined cleated conveyor. Equipped with 10" wide x 194" long belt with 1½" high cleats set on 11½" centers. 116" long horizontal run has a 16" in feed height. 40" long incline section and 38" long top ho...

30in Wide x 18ft Long Belt Feeder

Feed Rates: 4 TPH - 1.5ft/min 8 TPH - 3.0ft/min Height, Ground to Top of Belt: (29) Top Idlers (2) Bottom Idlers Overall Dimensions:

Model 101-48 Front End Loader Hopper with 48" Belt Feeder 101-48G

• Manufacturer: Correa

Rock Systems heavy duty front end loader feed hopper Model 101-48-18 with 48” wide belt feeder and hydraulic tipping reject grizzly complete as follows: a. 8’-0” wide x 16’ long hopper opening constructed of 3/8”...

5-1/2" wide x 110" long stainless steel thermoplastic belt feeder/elevator

• Manufacturer: ELEVATOR

5-1/2" wide x 110" long stainless steel thermoplastic belt feeder/elevator, 55-1/2" long x 30" wide x 30" deep tapered hopper, 5-1/2" wide x 110" conveyor, 2" tall cleats spaced every 8", 68" discharge height, co...

5-1/2" wide x 110" long stainless steel thermoplastic belt feeder/elevator

• Manufacturer: ELEVATOR

5-1/2" wide x 110" long stainless steel thermoplastic belt feeder/elevator, 55-1/2" long x 30" wide x 30" deep tapered hopper, 5-1/2" wide x 110" conveyor, 2" tall cleats spaced every 6", 68" product discharge he...

13" Wide Stainless Steel Merrick Model 950 Belt Feeder [PARTS]

• Manufacturer: Merrick Industries

Serial No: 23950 Feeder allows for a 13" wide belt, approximately 36" in length. 8" diameter inlet sleeve. 1/4HP gearmotor drive (broken mounting foot & missing pulley). LCD display controller. Installed to a rot...

13" Wide Stainless Steel Merrick Model 950 Belt Feeder [PARTS]

• Manufacturer: Merrick Industries

ITEM #: 21328 Used 13" Wide Stainless Steel Merrick Model 950 Belt Feeder [PARTS] Serial No: 23950Feeder allows for a 13" wide belt, approximately 36" in length.8" diameter inlet sleeve.1/4HP gearmotor drive (bro...

Steel Hopper Parts Feeder Floorbin Elevator 12" Steel Belt Incline Conveyor

In Good Used Condition. Tested and cleaned in our shop. Heavy steel frame and steel belt. Has been modified with a right side discharge and return chute. Steel belt cleats are cut down and welded on angle. Bin s...

CONVEYOR – 30” wide x 60’ long Aggregate Transfer or Stockpiling Conveyor

(1) – one – 30” wide x 60’ long Aggregate Transfer or Stockpiling Conveyor, 24” deep truss frame, 5” diameter 35 degree trough idlers, 15 h.p. electric motor, V-belt drive with guard, Browning shaft mounted oil l...

Elevator E.138 bulk feeder in stainless steel with stainless steel belt

• Manufacturer: Correa

Elevator E.138 bulk feeder in stainless steel with stainless steel belt Length - 310cm. Width - 79cm. Height - 260cm. Access height - 140cm. Exit height - 200cm. With carrier - 5cm. Between carrier - 30cm. Mesh s...