Used test

Flat Belt Conveyor 5.5" X 41" ( Used and Tested )

• Manufacturer: Correa

Flat Belt Conveyor 5.5" X 41" ( Used and Tested ) Weight: 50.00 LBS

Felt Flat Belt Conveyor 2" X 64.75" ( 1 X 34" - 1 X 30" ) (Used and Tested)

• Manufacturer: Correa

Felt Flat Belt Conveyor 2" X 64.75" ( 1 X 34" - 1 X 30" ) (Used and Tested)

Laughlin SS Plastic Belt Incline Conveyor

• Manufacturer: Laughlin SS Conveyors

Laughlin SS Plastic Belt Incline ConveyorS/N: 10133, 84 in. long x 12 in. wide x 28 in. tall infeed, 34 in. tall discharge. Leeson 1 HP washdown motor, Allen Bradley Powerflex 40 vfd. Plastic interlock belting ...

SS Incline Plastic Belt Conveyor

SS Incline Plastic Belt Conveyor. 123 in. long x 21.5 in. wide x 39 in. tall infeed, 84 in. tall discharge. Allen Bradley Powerflex 4 vfd, SS frame, on casters, 208V, 3 Phase, 60 Hz. Overall dimensions: 128 in....

SS Incline Plastic Belt Conveyor

SS Incline Plastic Belt Conveyor136 in. long x 21.75 in. wide x 36 in. tall infeed, 83 in. tall discharge. Controls include on/off, start/stop, e-stop, photo eye on/off and dial speed control. Allen Bradley Powe...

SS Incline Plastic Belt Conveyor

SS Incline Plastic Belt Conveyor. 123 in. long x 21.5 in. wide x 37 in. tall infeed, 84 in. tall discharge. w/ SS discharge chute 66.5 in. tall. Vacon vfd, SS frame, on casters, 208V, 3 Phase, 60 Hz. Overall d...

KleenLine 14.5ft Dual Belt Stainless Steel Flat Conveyor

• Manufacturer: Kleenline Corporation

Unit is USED. The unit was removed from a working environment and was functioning as intended when removed from service. The unit shows some signs of wear, but none effecting the intended use of the unit. Air cyl...

Goessling 90° Up / Elevating / Z Conveyor | Screw / Bolt / Material Conveyor

• Manufacturer: Goessling USA, Inc.

Unit is USED / BUT IN VERY GOOD CONDITION. Conveyor shows very little signs of wear. Some scratching / blemishes / worn paint can seen on the conveyor. This unit has been tested as seen in the video and functions...

Stainless Steel | 13Ft. Food Grade Flattop Conveyor

• Manufacturer: Correa

Unit is USED / BUT IN EXCELLENT CONDITION. Belt is NEW / NEVER USED - Installed on 05/09/2025. Conveyor shows very little to no signs of wear. This unit has been tested as seen in the video and functions as inten...

Roach 18"x 24"L Small Slider Bed Conveyor 12" Belt .5Hp 230/460V 3PH 80 FPM

• Manufacturer: Roach

We set up and test all our conveyors before listing. Motor & Gearbox: 1/2Hp 230/460V 3PH 25:1 Gearbox Voltage motor is currently wired for:: 460V 3PH If this item ships as Flat Rate Freight please see details in ...

47"W MatTop Roller Belt Conveyor 44"BF 42"Belt 15Hp 3PH 79' + 83' Lot of 2

• Manufacturer: Correa

This is a lot of 2 separate conveyors with the same size drives. 79' and 83' lengths with 2 different leg heights. Motor & Gearbox: 15Hp 230/460V motor with 9:1 gearbox. Bed Length: 79' & 83' Lengths. 79' conve...

Dematic 39"x 10' Gapper Conveyor 34" Belt 2-Speed Package Gapping 90/165fpm

• Manufacturer: Dematic

Note: Unit has transition roller shown in images, but is not included Motor & Gearbox: 1Hp 230/460V 3PH 30:1 Gearbox. Voltage tested and wired for:: 460V If this item ships as Flat Rate Freight please see details...

Dorner 2200 Series 12"x 10' Incline Belt Conveyor 115V Variable Speed 114FPM

• Manufacturer: Correa

Dorner aluminum conveyor on steel adjustable leg supports. Motor & Gearbox: 10:1 Bodine DC gearmotor 130V 1/3Hp. Bed Height (From Floor): Lowest height is 9" Infeed to 35" at top. Highest setting is 7" Infeed 5...

Roach Vertical Lift Elevator 36"Wx 48"L Belt Conveyor 11' 4" Travel 460V 3PH

• Manufacturer: Roach

Heavy Duty Chain drive lift elevator with belt conveyor. 11' 4" distance from bottom loading to top exit opening. 36"W x 18" load openings. 16' 3" to top of frame. 54"x 56" cage frame size. Voltage tested and wir...

HFA 2200 Series 16"W x 17' 4" Incline Drying Conveyor 120V Torn Belt Bad Fans

• Manufacturer: HFA

Bed Height (From Floor): Conveyor is on adjustable t-slot frame and legs. 28"-60" on infeed. 116" max at the top. Has angle adjustment on both legs. Voltage tested and wired for:: 115V Product Videos If this item...