- Trusted Seller

Three-jaw chuck by WMW Niles - DH250x3-III 19671
- Manufacturer: Niles
- Model: DH 250
Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | One sentence: hard interchangeable jaws | Passage: 81 mm | Recess: Ø 210 mm | Hole circle: Ø 230 mm | Mass: 19 | Internal storage: 3A20501
Wiefelstede, Germany - Trusted Seller

WMW Niles Ø 1400 x 2000 mm
- Manufacturer: Niles
- Spindle bore: 90 mm
WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm | Swing over bed: 1400 mm | Swing over cross-slide: 1100 mm | Swing in gap: 1800 mm | Diametre of main spindle bore: 90 mm | Power on main spindle: 14 ...
Deinze, Belgium - Trusted Seller

WMW Niles DLZ Ø 630 x 2500 mm
- Manufacturer: Niles
- Spindle bore: 72 mm
WMW Niles DLZ Ø 630 x 2500 mm Distance between centers: 2500 mm | Swing over bed: 630 mm | Swing over cross-slide: 400 mm | Swing in gap: 720 mm | Diametre of main spindle bore: 72 mm | Power on main spindle: 19 ...
Deinze, Belgium 
WMW Niles DLZ630 3000 E IV
- Manufacturer: Niles
- Model: DLZ 630
WMW Niles Heavy Duty Turning Centre with DRO Type:DLZ630 3000 E IV Turning length:3000mm Max. turning diameter above the bed:630mm Turning speed:22,4– 1120 rpm Spindle bore:72mm With MULTIFIX Please Note: The ab...
Belgium
WMW Niles DLZ630 3000 E IV
- Manufacturer: Niles
- Model: DLZ 630
WMW Niles Heavy Duty Turning Centre with DRO Type:DLZ630 3000 E IV Turning length:3000mm Max. turning diameter above the bed:630mm Turning speed:22,4– 1120 rpm Spindle bore:72mm With MULTIFIX Please Note: The ab...
Belgium- Trusted Seller

1960 NILES-ZERBST DLZ 630III
- Manufacturer: Niles
- Model: DLZ 630
- Spindle bore: 70 mm
Thread cutting possible Accessories: 4-jaw chuck various tips Gear wheels Jaws and small parts
Leipzig, Germany - Trusted Seller

1963 NILES-ZERBST DLZ 630III x 3000
- Manufacturer: Niles
- Model: DLZ 630
incl. 2x steady rests and various tips Type of control: conventional | Freight basis: from location,without dismantling unpacked | Storage location: GOG Bitterfeld - Bestand | Turning diameter over bed: 1000 mm |...
Leipzig, Germany - Trusted Seller

WMW NILES DH-A-250x3
- Manufacturer: Niles
- Model: DH 250
Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with...
Leipzig, Germany - Trusted Seller

WMW NILES DH B/8 - 250x3
- Manufacturer: Niles
- Model: DH 250
incl. 3 clamping jaws mounted, max. clamping range outside: Ø 60 - 188 mm and max. clamping range inside: Ø 17 - 192 mm with base plate Ø 303 x 48 mm; outer pitch circle Ø 280 mm with 4x M16 holes; inner pitch ci...
Leipzig, Germany - Trusted Seller

1983 NILES DLZ 630 V x 2000
- Manufacturer: Niles
- Model: DLZ 630
- Power requirement: 15 kW
This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1...
Germany - Trusted Seller
Wmw niles dh250 4
- Manufacturer: Niles
- Model: DH 250/4
Superaccessoried Stripping Lathe excellent condition
Reggio Emilia, Italy WMW-Niles DH 250 II 630
- Manufacturer: Niles
- Model: DH 250
Circulating diameter: 250 mm Turning length: 630 mm The machine is in good technical condition, inspection by prior agreement. The machine is in a good technical condition, inspection after previous agreement pos...
Sedliště, Czech Republic- Trusted Seller
Reggio Emilia, Italy 37" X 314" NILES ENGINE LATHE: STOCK #72193
- Manufacturer: Niles
- Model: DLZ 800III
Stock#: 72193 | Swing over bed ways: 37-1/2" | Swing over cross slide: 24" | Distance between centers: 314" | Spindle speeds: 14 TO 710 RPM | Hole through spindle: 3-7/8" | Longitudinal feed range: 0018 TO 125 I...
Holland, OH- Trusted Seller
NILES DLZ 1000I LATHE
- Manufacturer: Niles
- Model: DLZ 1000
W/PARTS, STEADY REST, TAIL STOCK, COMPOUND REST, NEWALL DRO, ELECTRICAL CABINET, MOTOR, 39" 4 JAW CHUCK, 4" BORE, 30 KW, 1450 RPM, (1925#) 265X84X69, (572#) 48X43X24, (398#) 50X40X13, (295#) 50X35X14, (285#) 43X4...

Niles DLZ 800III Centre Lathe
- Manufacturer: Niles
- Model: DLZ 800III
Good condition Niles DLZ 800III Centre Lathes. Located in USA and other countries. Click request price for more information.
USA

