Used Bending & Forming in Germany

Trusted Seller
ERCOLINA SB48 EDT PLUS-M
- Manufacturer: Ercolina
- Model: SB48
- Power requirement: 1.5 kilowatt
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Bending speed: 2U/min | Total power requirement: 1,5kW | Weight of the machine approx.: 110kg | Dimensions of the machine approx...
Günzburg, Germany
Trusted Seller
ZOPF T 100 digital
- Manufacturer: Zopf
- Model: T 100 DIGITAL
- Power requirement: 1.5 kilowatt
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 100kN | Stroke: 0-200mm | Table-size: 450 x 1000mm | Working speed: 6-10mm/ sec. | Return speed: 20mm/sec | Work heigh...
Günzburg, Germany
Trusted Seller
ZOPF ZB 80/2 M
- Manufacturer: Zopf
Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - U...
Günzburg, Germany
Trusted Seller
ZOPF ZB 80/2 H
- Manufacturer: Zopf
- Model: ZB 802 H
Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - U...
Günzburg, Germany
Trusted Seller
ZOPF ZB 70/3M ECO
- Manufacturer: Zopf
Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the gui...
Günzburg, Germany
Trusted Seller
ZOPF ZB 70/2M
- Manufacturer: Zopf
- Model: ZB 702M
Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide...
Günzburg, Germany
Trusted Seller
2012 FACCIN 4HEL-2122
- Manufacturer: Faccin-Biko
- Model: 4HEL
Control: Faccin | Storage location: Location | Freight basis: Delivery ex location. | Sheet width: 2000mm | Plate thickness: 11mm | Pre-bending: 8 | Upper roll diameter: 225mm | Lower roll diameter: 215mm | Side...
Günzburg, Germany
Trusted Seller
ROLLMAK SM 90-12/3.0
- Manufacturer: ROLLMAK
- Power requirement: 1.1 kilowatt
Control: conventional - | Storage location: Factory | Freight basis: Delivery ex works. | Sheet width: 1256mm | Plate thickness: 3mm | Pre-bending: 2,5mm | 0: 90mm | Minute slide.: 130mm | Total power requiremen...
Günzburg, Germany
Trusted Seller
1993 BLEMAS EURO 160
- Manufacturer: BLEMAS
This BLEMAS EURO 160 press brake was manufactured in 1993. It features a press force of 160t and a bending length of 3m. The stand passage is approximately 2.5m, and it is equipped with a Cybelec control system. ...
Germany
Trusted Seller
2011 AMADA HFP NT 220-4L
- Manufacturer: Amada
This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-...
Germany
Trusted Seller
2012 LVD PPEC 135/30
- Manufacturer: LVD - Strippit
This 4-axis LVD PPEC 135/30 press brake was manufactured in 2012. It features hydraulic clamping for enhanced efficiency and requires no tools for operation. Consider the opportunity to buy this LVD PPEC 135/30 p...
Germany
2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kilowatt
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany
Trusted Seller
ZOPF P38 Evo
- Manufacturer: Zopf
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Engine: 2,8KW | Weight of the machine approx.: 320kg | Dimensions of the machine approx.: 86 x 90 x 85cm
Günzburg, Germany
Trusted Seller
ROLLMAK SME 140-20/4.5
- Manufacturer: ROLLMAK
- Power requirement: 2.2 kilowatt
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Sheet width: 2050mm | Plate thickness: 4.5mm | Pre-bending: 4.0 | Volt: 400V | Frequency range: 50Hz | Minu...
Günzburg, Germany
Trusted Seller
EPPLE RME 1020-2
- Manufacturer: EPPLE
Control: conventional - | Storage location: Günzburg | Sheet width: mm | Plate thickness: mm | Total power requirement: kW | Weight of the machine approx.: t | Dimensions of the machine approx.: m
Günzburg, Germany
Akyapak AS 70-10/1.5 Bending & Forming
- Manufacturer: Akyapak
- Model: AS 70-10/1.5
Good condition Akyapak AS 70-10/1.5 Bending & Formings manufactured in 2025. Located in Germany and other countries. Click request price for more information.
Germany