Used Extruders

75mm Davis Standard “Super Blue” Extruder 24:1 – Air Cooled 2013
Rockville Centre, NY
Buy Farrel Co-Rotating Twin Screw Extruder with Gala & Acrison Feeder
- Manufacturer: Acrison
54182001 Used Farrel Twin Screw Pelletizing Line Consisting Of: (1) Farrel 37 mm FTX80 co-rotating twin screw extruder, 5 zone electrically heated, water cooled, approximately 40:1 L/D. Driven by a 25 hp, 500 vol...
Belvidere, IL
Trusted Seller
DAVIS STANDARD 150INDS-20
- Manufacturer: Davis-Standard
Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...
Hainesport, NJ
Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled
- Manufacturer: Davis-Standard
10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...
Belvidere, IL
Trusted Seller
1991 DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M-3315, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-1...
Hainesport, NJ
Trusted Seller
2000 DAVIS STANDARD 5.11"
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
1997 DAVIS STANDARD 5.11"
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Italtech Sandore Pasta Mixer Extruder – Model MX180DH | 200 kg/hr | 195mm Die | 8.5 kW | Built 2008
- Manufacturer: SandoreSandore
53530001 Used Italtech Sandore Pasta Mixer Extruder, Model MX180DH. 200 Kg/hour extrusion production; 30 kg extruder basin dough capacity; 50/kg mixer/kneader basin dough capacity; 195mm die dimension; Vacon X-Se...
Belvidere, IL
Trusted Seller
2001 DAVIS STANDARD PEDESTAL
- Manufacturer: Davis-Standard
- Model: PEDESTAL
Used 1.25" Davis Standard Pedestal Extruder With 36/1 L/D Vented Barrel. New 2001. Has electrically heated air cooled barrel, includes temperature control panel and 5 hp AC motor, 230/460 volt. Previously used as...
Hainesport, NJ
High-Capacity Prealpina Single Screw Extruder – 1100 lbs/hr Production Rate
- Manufacturer: Prealpina
53309001 Used Prealpina 130 mm Diameter Single Screw Extruder, with a capacity of 1100 LBS/500 Kgs./hr. Electrically heated, air cooled. incl. die head and control panel. Reported to have new screw and barrel. Pr...
Belvidere, IL
Leistritz Micro18-GGL Twin Screw Pelletizing Line – Industrial Polymer Extruder
- Manufacturer: Leistritz
40425043 Used Leistritz Twin Screw Pelletizing Line, Model Micro18-GGL. 18 mm Screws, counter rotating screws, 40:1 1/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.3 kw, 210/260 volt, 2950 r...
Belvidere, IL
Buy Pre-Owned Coperion ZSK 160 Twin Screw Extruder — 8 Barrel Sections + Gear Reducer
- Manufacturer: WP
53949001 Used Werner Pfleiderer / Coperion Model ZSK 160 Twin Screw Extruder. Co-Rotating. Project No 87-3593. 8 barrel sections. Approximate 14' long screws. Approximate 26:1 L/D. Electrically heated. Gear Reduc...
Belvidere, IL
Trusted Seller
DAVIS STANDARD 1.5"
- Manufacturer: Davis-Standard
- Model: 15
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder. New in 1989. Equipped with 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor dr...
Hainesport, NJ
Pre-Owned PRISM KX-16 R&D Twin-Screw Extruder – 1.25?kW Motor, Full Infrastructure
- Manufacturer: PrismPrism
54037005 Used Thermofischer/PRISM 16 mm Eurolab Twin Screw Extruder. 16mm Diameter screws. 40:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 1.25 kW motor. 7 housing sections. Electrically heated, water co...
Belvidere, IL
Trusted Seller
DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ