Used Extruders

KILLION KN-150 1.5″ 30:1 L/D 18111
One used Killion model KN-150 1.5″ 30:1 extruder. S/N 15437. Five (5) zone electrically heated, air cooled, and top-vented barrel at an approximate 39″ centerline height. Gearbox is a Koellmann model PEZS20 and h...
Elk Grove Village, IL
KILLION 1.250″ 30: 7.5 HP 16432
One used Killion model KN-125 1.25” 30:1 extruder having a four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 39″ centerline height. Gearbox is a Koellmann model PEZS-20 and h...
Elk Grove Village, IL
EGAN 6″ 30:1 L/D 400 18037
- Manufacturer: Egan
One (1) used Egan 6″ 30:1 L/D extruder. S/N 37910. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate a 42” center line height. Water system is incomplete. Philadelphi...
Elk Grove Village, IL
Trusted Seller
PhD Nanotech NA-1000 Extruder NEW Homogenizer
Nitrogen Cylinder Air Compresser Nitrogen Cylinder Air Compresser Nitrogen Cylinder Air Compresser
Watertown, MA
DAVIS STANDARD 1/4″ TUBING EXTRUSION 17437
- Manufacturer: Davis-Standard
Davis Standard 1/4″ tubing extrusion line including the following equipment:A. Davis Standard / Killion model KN-100 1.00″ 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barr...
Elk Grove Village, IL
Trusted Seller
HERLAN P10
- Manufacturer: Herlan
- Model: P10
Used HERLAN P10 Impact Extrusion Press Manufacture - Herlan / 19?? / SN - - Model - P10 Nominal Power - 620 metric tons Stroke Length - 325 mm max Aluminum (99.5) - Max Diameter - 75mm - Max Wall Thickness - ...
Banner Elk, NC
Trusted Seller
HERLAN P5
- Manufacturer: Herlan
- Model: P5
Used HERLAN P5 Impact Extrusion Press Manufacture - Herlan / 19?? / SN - - Model - P5 Nominal Power - 240 metric tons Stroke Length - 300 mm max Aluminum (99.5) - Max Diameter - 38mm - Max Wall Thickness ...
Banner Elk, NC
Trusted Seller
HERLAN P84
- Manufacturer: Herlan
Used HERLAN P84 Impact Extrusion Press Manufacture - Herlan / 19?? / SN - - Model - P8 Nominal Power - 400 metric tons Stroke Length - 335 mm max Aluminum (99.5) - Max Diameter - 65mm - Max Wall Thickness - 0...
Banner Elk, NC
Trusted Seller
Custom 4.0 Cu.Ft. Stainless Steel Extruder Feed Hopper-Split Chamber
Used Custom 4.0 Cu.Ft. Stainless Steel Extruder Feed Hopper-Split Chamber. Capacity: ~4.0 Cu.Ft. (300-400lbs.) Split Chamber Two Sight Glass Two Discharge Ports Feed Opening Size: Two(2) 3" x 2-1/4" 8" x 8" Extru...
$795 USD
Millis, MA
Trusted Seller
1961 HERLAN P5
- Manufacturer: Herlan
- Model: P5
Manufacture - Herlan / 1961 / SN - 5281 - Model - P5 Nominal Power - 240 metric tons Stroke Length - 300 mm max Aluminum (99.5) - Max Diameter - 38mm - Max Wall Thickness - 0.10mm - Max Extruded Length - 250mm...
Banner Elk, NC
Trusted Seller
1957 HERLAN P6
- Manufacturer: Herlan
- Model: P6
Herlan P6 Impact Extrusion Press: IEX-048 Manufacture: - Herlan P6 / 1957 Capacity: - 270 mton rating Stroke: - 13.8" / 350 mm Strokes per Minute: - 85 maximum Maximum Diameter: - 45 mm (aluminum) Minimum W...
Banner Elk, NC
Trusted Seller
Welex Model HS 3.0 40D SV Extruder
- Manufacturer: Welex
Welex Model HS 3.0 40D SV Extruder Year of manufacture- 2009 Type- vented/plugged, high speed, single screw Serial number- 8454 Extruder diameter- 3″ L/D ratio- 40/1 Motor- A.C.- 412 Kw/550 horse power (direct dr...
Harvey, LA
Trusted Seller
HERLAN P6
- Manufacturer: Herlan
- Model: P6
Used HERLAN P5 Impact Extrusion Press Manufacture - Herlan / 19?? / SN - - Model - P6 Nominal Power - 240 metric tons Stroke Length - 300 mm max Aluminum (99.5) - Max Diameter - 38mm - Max Wall Thickness - 0....
Banner Elk, NC
Trusted Seller
HERLAN P5
- Manufacturer: Herlan
- Model: P5
Used HERLAN P5 Impact Extrusion Press Manufacture - Herlan / 1961 / SN - 5268 - Model - P5 Nominal Power - 240 metric tons Stroke Length - 300 mm max Aluminum (99.5) - Max Diameter - 38mm - Max Wall Thickness...
Banner Elk, NC
Trusted Seller
1963 HERLAN P10
- Manufacturer: Herlan
- Model: P10
Used HERLAN P10 Impact Extrusion Press Manufacture - Herlan / 19?? / SN - - Model - P10 Nominal Power - 620 metric tons Stroke Length - 325 mm max Aluminum (99.5) - Max Diameter - 75mm - Max Wall Thickness - ...
Banner Elk, NC