Used Food & Beverage Processing in Flanders, Belgium

“Seamac” steam tunnel, Type Varicon 4-800

cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the ...

“Kersting” After Heating Tunnel

• Manufacturer: Kersting

net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) suitable for steam heating adjustable speed 120 kW mesh wire...

Linear oven “Formcook”, Type HSC 1075E

• Manufacturer: Formcook

all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system Modular construction system Conveyor belt (ope...

CookStar “GEA-CFS” Spiral oven, Type H600/10/100-102

• Manufacturer: CFS/Koppens

net belt width ± 600 mm total electrical power 33 kW 2x5 tiers automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW ...

Cooking vessel 3.000L “Conrad Engelke”

completely stainless steel Suitable for direct steam injection (4 points at the bottom of the conical base) Operating temperature 125°C Operating pressure 2.5 bar Insulated (bottom + walls) Manhole DN500 Internal...

Vacuum Cooking-Stirring Tank “LKM Norderstedt”

Conical bottom Pressure -1/3Bar Operating temp. 200°C Stainless steel 316L Motor SEW 0,9 kW-31 rpm/1,8 kW-64 rpm 400V Suitable for CIP Suitable for direct steam injection Suitable for vacuum With agitator Switch ...

“Terlet” Cooking line

• Manufacturer: Terlet

stirring system with scrapers Max.4 bar steam pressure Yoc 2010 incl. control box 1 x Lobe Pump Jabsco Incl. 2 steam control valves. RTK Platforms in stainless steel

Linear oven 3 tiers “Provisur TST”, Type COO1350x6000

• Manufacturer: Provisur

all stainless steel completely isolated infeed conveyor outfeed conveyor belt width ± 1.350 mm 3 tiers from 6.000 mm adjustable speed suitable for thermal oil heating

“FlowCook” Hot air oven “GEA-CFS”, Type FLC 14000/600

• Manufacturer: CFS/Koppens
• Model: FlowCook FLC14000/600

all stainless steel suitable for thermal oil heating belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid

Groninger Filling Line - Groninger - ZO001

• Manufacturer: Groninger

The Machine Come With: - Stoppering - Capping - Crimping

2000 INGERSOLL RAND IRT6000

• Manufacturer: Ingersoll Rand
• Model: IRT6000

Capacity [m³/min]: 100 | Pressure [bar]: 16 | Stars: Good | Outside condition: Good | Location machine: Belgium - EU

2003 SUCKER WE11

• Manufacturer: sucker

Sizing machine SUCKER MULLER type WE11 year of construction 02/2003, working width 2800mm, 10 drying cylinders 1800mm of those 6 teflon coated + 1 spare cylinder, single size batch, creel for 16 warping cylinders...

Capsule Filling Machine - MG2 - Alterna 70N - CP.003.LZ

• Manufacturer: MG2

Power: 2.5 kW | Frequency: 50 Hz | Voltage: 400 V | Flow rate: 6 m³/h | Power factor: cos φ 0.85 | Pressure: 600 kPa | Weight: 950 Kg

Capsule Filling Machine - NJP 1250 - CP.002.LZ

Power: 5 kW | Full load current: 12.8 A | Voltage: 3 P+PE 50 Hz 380 V | Dimensions: 870 x 1020 x 1980 mm | Weight: 900 Kg

Capsule Filling Machine - Capsugel - Ultra™ III - CP.001.LZ

• Manufacturer: Capsugel
• Model: ULTRA III

Power: 208-230 V ~ 3Ph + PE | Current load: 16 A | Frequency: 50/60 Hz | Over current device: 20 A | Rated short circuit breaking capacity: 10 kA | Mass: 610 Kg