Used Injection Molding in Germany

2019 HAITIAN Jupiter JU7500II
- Manufacturer: Haitian
Clamping force (kn): 7500 | Stroke volume (ccm): 2262
Eschweiler, Germany
2019 HAITIAN Jupiter JU7500II
- Manufacturer: Haitian
Clamping force (kn): 7500 | Stroke volume (ccm): 2262
Eschweiler, Germany
2003 Krauss Maffei KM 300 - 1900 - 390 CL
- Manufacturer: Krauss-Maffei
Krauss Maffei KM 300 - 1900 - 390 CL Clamping force (kn): 3000 | Stroke volume (ccm): 1047 / 156
Eschweiler, Germany
2006 Krauss Maffei KM 160 - 750 CX
- Manufacturer: Krauss-Maffei
- Model: KM160-750CX
Clamping force (kn): 1600 | Stroke volume (ccm): 393
Eschweiler, Germany
2006 Krauss Maffei KM 160 - 750 CX
- Manufacturer: Krauss-Maffei
- Model: KM160-750CX
Krauss Maffei KM 160 - 750 CX Clamping force (kn): 1600 | Stroke volume (ccm): 393
Eschweiler, Germany
2013 ENGEL Victory 50-200 Spex
- Manufacturer: Engel
- Model: Victory
Clamping force: 50 ton | Opening stroke: 400 mm | Mould height min.: 200 mm | Opening width: 600 mm | Platen size (h x v): 500 X 450 mm | Screw diameter: 25 mm | Injection volume: 69 cm³ | Shot weight: 62 g | In...
Mülheim, Germany
2001 ARBURG 420C-1300-350
- Manufacturer: Arburg
- Model: 420 C
Clamping force: 130 ton | Opening stroke: 500 mm | Distance between tie bars: 420 x420 mm | Mould height min.: 250 mm | Opening width: 750 mm | Platen size (h x v): 605 x 605 mm | Screw diameter: 45 mm | Injecti...
Mülheim, Germany
2008 ARBURG 470 C 1500-400 Golden Editions
- Manufacturer: Arburg
- Model: 470 C
Clamping force: 150 ton | Opening stroke: 500 mm | Distance between tie bars: 470 x 470 mm | Mould height min.: 250 mm | Opening width: 750 mm | Screw diameter: 35 mm | Injection volume: 154 cm³ | Shot weight: 1...
Mülheim, Germany
2016 Dr. Boy 55 A DUROPLAST (only 7,278 h)
- Manufacturer: Boy
- Model: 55 A
DUROPLAST granulate injection unit, single core pull control, blow-out device, preparation for 4-cavity mold heating, etc...
$27,749 USD
Get financing
Est. $522/mo
Heilbronn, Germany
2010 ENGEL victory 200/50 Spex er/usp (24,500 h)
- Manufacturer: Engel
- Model: Victory
incl. er/usp sprue picker, air valve etc... Operating hours: 24,500 hours | Snail: 25 mm | Injection pressure: 2090 bar | Displacement: 69 cm³ | Closing force: 50 t | Tie bar spacing: 500 x 450 mm | Form installa...
$27,399 USD
Get financing
Est. $516/mo
Heilbronn, Germany
2012 ARBURG A 375 V 500-170 Rotary table
- Manufacturer: Arburg
Vertical spraying machine with 900mm turntable, rotation angle left / right 180°, incl. horizontal position device for spraying into the parting line incl. scissor lift table and plates for intervention protectio...
$63,542 USD
Get financing
Est. $1,196/mo
Heilbronn, Germany
2016 Engel E-Motion 110 1023
- Manufacturer: Engel
- Model: E-motion
Clamping force: 110 | Snail: 35 | Snail armored: Armored | Spar width: 510 x 460 | Wz. installation min.: 150 | Wz. installation max.: 450 | Wz. opening min.: 400 | Injection pressure: 2400 | Shot volume: 168 | ...
Germany
2001 Demag Ergotech ET 50- 120 H system 997
- Manufacturer: Demag
- Model: System
Clamping force: 50 | Snail: 25 | Wz. installation min.: 252 | Wz. opening min.: 550 | Injection pressure: 2000 | Shot volume: 61 | Bullet weight: 54 | Maximum weight: 3,5 | Length: 3,2 | Width: 1,35 | Height: ~2...
Germany
Demag / Sigmatek Ergotech IBED NCIV SW 874 611 65
- Manufacturer: Demag
- Model: Ergotech
Description: Symbolfoto
Germany
Demag / Sigmatek Ergotech IBDED NCIV Farb V1.0 885 611 65
- Manufacturer: Demag
- Model: Ergotech
Description: Symbolfoto
Germany
Arburg Allrounder 270 Injection Molding
- Manufacturer: Arburg
- Model: Allrounder 270
Good condition Arburg Allrounder 270 Injection Moldings available between 1992 and 2013 years. Located in Ireland and other countries. Click request price for more information.
Ireland