Used Lathes in Germany

Trusted Seller
1977 RORSCHACH GF3
- Manufacturer: RORSCHACH
Info: vibratory feeder | Head dia.: 24 mm max. | Diameter range: 3,5-10 mm | Total screw length: 150 mm | Output – pieces/min: 28
Norderstedt, Germany
Trusted Seller
1975 RORSCHACH FA2
- Manufacturer: RORSCHACH
Info: vibratory feeder | Head dia.: 15 mm | Diameter range: 4-6 mm | Total screw length: 15-100 mm | Output – pieces/min: 45
Norderstedt, Germany
Pittler Pirex 32 / 170.1
- Manufacturer: Pittler
info according to internet research technical data from operator's manual see below internet research With momentary acting manual and program switching of spindle speeds and continuously variable feed rate mater...
Frankfurt, Germany
Trusted Seller
1954 VDF WOHLENBERG VDF
- Manufacturer: Wohlenberg
- Model: VDF
- Spindle bore: 80 millimeter
Type of control: Konventionell | Control: n/a | Machine-no.: 27XXX | Turning length: 4000 mm | Spindle diameter: Ø 80 mm | Faceplate speeds i: 355 RPM | Turning diameter over cross slide: Ø 1000 mm | Max. turnin...
Halberstadt, Germany
Trusted Seller
1957 VDF W 40
- Manufacturer: VDF - Boehringer
Type of control: Konventionell | Machine-no.: 030XXXX | Turning diameter: Ø 960 mm | Turning length: 4500 mm | Spindle speeds: Ø 105 RPM | Turning diameter over cross slide: Ø 600 mm
Halberstadt, Germany
Trusted Seller
1970 VDF BOEHRINGER T 11
- Manufacturer: VDF - Boehringer
- Spindle bore: 750 millimeter
Type of control: Konventionell | Control: n/a | Machine-no.: 40XXX | Turning diameter: Ø 700 mm | Turning length: 3000 mm | Spindle diameter: Ø 750 mm | Spindle bore: 70 mm | Swing diameter over cross slide: Ø 4...
Halberstadt, Germany
Trusted Seller
2008 SPINNER TC77 MCY
- Manufacturer: Spinner
- Model: TC77 MCY
Further information: Y axis + C axis. Machine can be inspected under power by arrangement.
Halberstadt, Germany
Trusted Seller
2008 MONFORTS UniCen 1000 MultiTurn 1022-2406
- Manufacturer: Monforts
- Power requirement: 65.6 kilowatt
UniCen Series for large complex components With the Monforts machine tools from the UniCen Series 1000 you can work with large, complex components up to 1500 mm diameter and 1000 mm swing diameter entirely, proce...
Monheim am Rhein, Germany
Pittler Priofa 40 / 150.1
- Manufacturer: Pittler
With momentary acting manual and program switching The spindle speeds for the optical, precision mechanical and fittings industry material passage with clamping tube 40mm largest turning diameter for chuck work A...
Frankfurt, Germany
GRAZIANO SAG 12 center and feed lathe .de
- Manufacturer: Graziano
- Model: SAG 12
Center lathe and center lathe Manufacturer: Graziano Model: sag12 Features: - Turning length max. 800 mm - weight approx. 1200g kg - dimensions (LxWxH) ca 1.500 x 1.000 x 1.600 mm - center height approx. 170 mm, ...
$8,160 USD
Get financing
Est. $160/mo
Berlin, Germany
Lathe Optimum Type D420x1000 .de
- Manufacturer: Optimum
Lathe Manufacturer: Optimum Model: D420x1000 The photos show the current condition and the scope of delivery. Loading aids are available. Demonstration under power possible. Basically we would like to point out t...
$9,325 USD
Get financing
Est. $183/mo
Berlin, Germany
Trusted Seller
2008 STOTZ Feinmesstechnik 11514
- Manufacturer: Stotz
STOTZ measuring unit - post-process measurement Serial number: 22837/1044 Was in use - connected between 2 Scherer vertical rotary cells, Production of "sun shafts" Little used - as good as new. Various configura...
Altenstadt, Germany
Trusted Seller
2008 STOTZ Feinmesstechnik 11515
- Manufacturer: Stotz
STOTZ measuring unit - post-process measurement Serial number: 22838/1043 Was in use - connected between 2 Scherer vertical rotary cells, production of "sun shafts" Little used - as good as new. Various configur...
Altenstadt, Germany
Trusted Seller
2008 STOTZ Feinmesstechnik 11513
- Manufacturer: Stotz
- Model: 11513
STOTZ measuring unit - post-process measurement Serial number: 22836/1040 was in use - connected between 2 Scherer vertical rotary cells, production of "sun shafts" - WEIGL Glauchau. Little used - as good as new....
Altenstadt, Germany
Trusted Seller
1990 EST TICINO 520 x 1500
- Manufacturer: EST Ticino
- Spindle bore: 160 millimeter
Further information: - Made of cast iron - Hardened and ground guideways The machine can be viewed under power by appointment.
Halberstadt, Germany
Mazak SUPER QUICK TURN 15M Lathe
- Manufacturer: Mazak
- Model: SUPER QUICK TURN 15M
Good condition Mazak SUPER QUICK TURN 15M Lathes available between 1993 and 1998 years. Located in Germany and other countries. Click request price for more information.
Germany