Used Machine Tools in Saxony, Germany

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW used, tested ! External ø: 315 mm | Hole circle ø: 275 mm | Bore ø: 100 mm | Height with jaws: 115 mm | Dimensions: 320 x 320 x 120 mm

WMW service unit

• Manufacturer: WMW

Service unit, machine control WMW SERVICE UNIT III AUERBACH Fkr SRS 250/1 ( AUERBACHFkrSRS250/1 ) approx. 6 m connection cable picture similar ! used, tested !

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Dessau 4KL 20 ( 4KL20 ) TGL 9922/04 ( TGL9922/04 ) Ø 50 mm 1 groove, width 14 mm 3 clutch disks used, tested !

ALLMATIC carrier jaw for gripper inserts

• Manufacturer: ALLMATIC

Carrier jaw for gripper inserts, mobile, pendulum ALLMATIC - JAKOB 2334/125 Including 2 cylinder screws DIN 912 M10x1.5 x 20 mm used, tested !

PAGUS pipe vice

• Manufacturer: Pagus

Pipe vice, round material vice PAGUS with stop, max 250 mm jaws rotatable ! used, tested ! very good condition !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 used, tested !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

PAGUS mechanical clutch

• Manufacturer: Pagus

Mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21 / 25 mm 4 grooves spare part for milling machine FRITZ WERNER FV1 ! used, tested !

PAGUS all-metal damper

• Manufacturer: Pagus

All-metal damper, machine foot set, leveling foot set, vibration isolator, 4 pieces PAGUS Ø 25 x 20 mm Threaded hole: M6 x 1.0 Depth: 10 mm 2x hole: Diameter: Ø 7 / 12 mm ( for hexagon socket screws ) Material: S...

FIXATOR level raising range

• Manufacturer: Pagus

Level raising range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with slot 24 mm 1 piece Ø 100 mm x 4 mm, with slot 24 mm 1 piece Ø 100 mm x 5 mm, with slot 24 mm...

WMW dividing head

• Manufacturer: WMW

Dividing head, dividing head, dividing table, with tailstock WMW Type TU 100 ( TU100 ) dividing head: mounting: MK4 ( inside ) / cone Ø 51 / 54 mm x 10 mm ( outside ) Flange diameter: Ø 108 mm, bolt circle diamet...

Incluido

• Manufacturer: Pagus

Machine vice PAGUS on rotary table with graduation 360° rotatable

PAGUS compact tensioner

• Manufacturer: Pagus

NC compact vice, machine vice PAGUS with prism jaw

CIMCO thread cutting dies

Threading die, steel conduit clamp , steel conduit clamp CIMCO Thread inserts: M20 / 25 / 32 x 1.5 Thread: M20 x 1.5 Thread: M25 x 1.5 Thread: M32 x 1.5 Used, tested!

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Dessau KLDO5 TGL 22050 ( TGL22050 ) New !