Used Machine Tools in Saxony, Germany

Trusted Seller
PAGUS pipe vice
- Manufacturer: Pagus
Pipe vice, round material vice PAGUS used, checked ! upper jaw holder broken !
$286 USD
Zschepplin, Germany
Trusted Seller
ALLMATIC NC high-pressure clamps
- Manufacturer: ALLMATIC
NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !
$933 USD
Zschepplin, Germany
Trusted Seller
1985 WMW 500
- Manufacturer: WMW
face slide with 4 clamping chucks (clamping travel 60mm) clamping area internal: 145-500mm and external 140-420mm flange intake size= dia. 200mm with clamping bolts equipment: socket wrench
Leipzig, Germany
Trusted Seller
Röhm SSH 200/3 (Nr. 43)
- Manufacturer: Röhm
stationärer Spannstock SSH 200 Kraftspannfutter, hydraulisch Kraftspannung 53 kN Merkmale: Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm Grundflansch Ø 290x30mm Flanschaufnahme Ø 140x10mm 20 Satz div. For...
Leipzig, Germany
Trusted Seller
Röhm Duro-NCES 260 77/3 (37)
- Manufacturer: Röhm
Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm
Leipzig, Germany
Trusted Seller
SMW Autoblock 105510 (Nr.40)
- Manufacturer: SMW Autoblock
Power chuck, automatic clamping Features: Equipped with forming jaws Clamping range min./max. 60 / 320mm Flange mounting Ø 295x5mm inside; mounting 3x holes Ø 21mm and pitch circle Ø 230mm
Leipzig, Germany
Trusted Seller
Forkardt KS 400 (Nr. 45)
- Manufacturer: Forkardt
Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø ...
Leipzig, Germany
Trusted Seller
WMW PS 300
- Manufacturer: WMW
technical features: - 4 jaw chuck, manual feed, clamping range: outside= max. Ø 280mm as well as inside=min. Ø 40mm
Leipzig, Germany
Trusted Seller
1999 TOS- TRENCIN FNG
- Manufacturer: TOS
Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...
Leipzig, Germany
Trusted Seller
90,6"L x 31,5"W x 67"H (230L x 80W x 170H cm)
- Manufacturer: WMW
Machine vice WMW on table with graduation 360° rotatable used, tested !
$303 USD
Zschepplin, Germany
Trusted Seller
GARANT shrink lining set
- Manufacturer: Garant
Shrink fit chuck set, shrink fit chuck GARANT 302325 SK 40 used !
$268 USD
Zschepplin, Germany
Trusted Seller
WMW AW1000x800x640
- Manufacturer: WMW
clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm
Leipzig, Germany
Trusted Seller
GÜHRING sealing plug
- Manufacturer: Guhring
Sealing plugs, 6 pieces GÜHRING GM300 4985 63.000 16136705 used, tested !
$373 USD
Zschepplin, Germany
Trusted Seller
WMW AW 1100x1000x610
- Manufacturer: WMW
Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm
Leipzig, Germany
Trusted Seller
1994 WMW 620x160
- Manufacturer: WMW
4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!
Leipzig, Germany