Used Machine Tools in Rhineland-Palatinate, Germany

Processing line solar modules

Automatic processing line of photo voltaik frames Pressta Eisele offers a fully automatic processing line of photovoltaik frames. Cutting, punching, milling of aluminium frames in 10 seconds cycle time. 2 operato...

Dyno 40

Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 400 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm

Dyno 20

Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 200 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm

Dyno 9

Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 90 KN Stroke = 40 mm 25 Double strokes / min. Max. daylight = 250 mm Working height 950 mm

Dyno 15

Quick change tool system Hydraulic operated Foot valve operated Max. power at 200 bar = 160 KN Stroke = max. 80 mm adjustable via limiter switch 14 Double strokes / min. Max. daylight = 250 mm

SW453 Reverse Garda-3

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 22,5° and 135°. Realized with c...

SW453 Plug

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby ...

PRESSTA – Line

The Frame manufacturing system PRESSTA ® – Line is designed for the optimal production flow at the corner cirmping on aluminum frames and related work transitions. The complete system consists of the following...

Expert

Base 3000 mm, with hardened guides in x-direction, 3.000 – 8.000 mm Electric device – operation via 2-hand safety control, setting mode to adjust drilling depth – key switch Drilling units with stand and linear g...

HMR 6 / 12

Base with hardened guides Hydraulic device; Motor 4,0 kW, 400 V, 50 Hz Operation panel to switch on/off single or multy head mode Foot pedal controlled C-formed stand, working range – ram to back wall 120 mm Dayl...

Level Master Wireless Big Daishowa 806.805

• Manufacturer: Daishowa

LEVEL MASTER Simultaneous 2-axis leveling device for the machine table. Simultaneous display of both axes by LED's. Big Daishowa 806.805

Pressta 3000

This crimper is designed for very high and heavy profiles. Up to 5 set of knifes per corner Heavy duty hydraulic crimer 3,0 KW, 400 V, 50 Hz, Crimping power 100 KN V-stop, crimping tools and V-blocks adjustable D...

SW600

Automatic cutting line for PVC and aluminum profiles with 90° and miter cuts Machine control unit through PC and 21“ monitor Maximum raw profile length to be processed with standard version of machine is 1000-700...

PS 500

Linear back to front blade feed motor above the table hardened guides, power unit gear motor and ball screw spindle blade feed speed adjustable via potentiometer 0,5 – 12 m/min Table left of blade 120mm width, ta...

Inclined loading magazine

Tooth beld drive – with storages Available for following automatic cutting machines: Profilma 200, 250, 500 E Max. load 8 storages Max. square 50 x 80 mm Max. weight 3 kg / m Profile length 2.100 – 6.500 mm Pneum...