Used Milling Machines in Germany

Trusted Seller
1990 KUNZMANN WF 5/3
- Manufacturer: Kunzmann
Additional Features Used HEIDENHAIN tool milling machine with digital display Accessories Complete electrical equipment in a swiveling control panel with digital display, lighting, coolant system, chip tray, hori...
Wiesbaden, Germany
Trusted Seller
1987 MIKRON WF 41 C
- Manufacturer: Mikron
- Model: WF 41
Additional Features Used CNC milling machine, HEIDENHAIN TNC 155 control Accessories Electrical equipment, swiveling control panel, removable chip tray, coolant system, technical documentation
Wiesbaden, Germany
Trusted Seller
1978 Maho MH300
- Manufacturer: Maho
- Model: MH300
1 used universal tool milling machine, make MAHO, Type MH 300, Serial No. 32392, built in 1978 with linear measuring system for Z axes Accessories Complete electrical equipment in the attached control cabinet a...
Wiesbaden, Germany
Trusted Seller
1972 KLOPP FS 11
- Manufacturer: Klopp
- Model: FS 11
Additional information Vertical milling machine in very good condition for its age Accessories Complete electrical equipment, coolant system, milling arbor, milling chuck with collets, tool cabinet with various a...
Wiesbaden, Germany
Trusted Seller
ACIERA F 4
- Manufacturer: Aciera
- Model: F4
Additional Features Hardly used and therefore very well-preserved universal tool milling machine Accessories Complete electrical equipment built into the machine base, coolant system, horizontal milling attachmen...
Wiesbaden, Germany
Trusted Seller
1982 Maho MH 700 C
- Manufacturer: Maho
- Model: MH 700 C
Additional Features Used CNC tool milling machine with NC rotary table and 432 contouring control Accessories Complete electrical equipment, tool clamp, coolant system, chip tray, telescopic tool cabinet with 7 c...
Wiesbaden, Germany
Trusted Seller
1995 MIKRON UMS600 1113-2100075
- Manufacturer: Mikron
Control type: CNC | Control name: Heidenhain TNC426 | Freight basis: FCA | X-off: 600 mm | Y-off: 500 mm | Z-way: 450 mm | Machine weight approx.: 3,5 t
Staufenberg, Germany
Trusted Seller
HERMLE FU 710 HS 49/0
- Manufacturer: Hermle
Additional Features Used universal milling machine with manual control for longitudinal table movement Accessories Complete electrical equipment, coolant system
Wiesbaden, Germany
Trusted Seller
1988 MAHO MH 800 E
- Manufacturer: Maho
- Model: MH 800
Additional Features Used CNC milling machine, equipped with a 432 CNC control system with graphics and a "half cab" Accessories Complete electrical equipment in the control cabinet mounted at the rear of the mach...
Wiesbaden, Germany
Trusted Seller
SCHAUBLIN Typ 53
- Manufacturer: Schaublin
Used universal milling machine, SCHAUBLIN, Type 53, Serial No. 926, year of manufacture unknown Accessories Complete electrical equipment, digital display, RSF electronics for 2 axes, cutter head, coolant system,...
Wiesbaden, Germany
Trusted Seller
Auction
6-axis deep drilling/milling center SAMAG TFZ3-1500
- Manufacturer: Samag
SN: 68023, working area X/Y/Z 1,250 x 1,250 mm, W-axis (drilling and milling unit horizontal) 2,000 mm, A-axis (drilling and milling unit swiveling) -25° - +15°, B-axis (rotary table) 360°, table load 15,000 kg, ...
Ingolstadt, Germany
Visit Auction Website
Trusted Seller
Rotating, swivel and tilting table DECKEL
- Manufacturer: Deckel / Maho
Addition: Little-used and very well-maintained rotary, tilting, and swivel table, suitable for DECKEL FP 3 L; FP 3 LG; FP 3 LV milling machines. Further information: 6 16 mm chip slots, 90 mm slot spacing, horizo...
Wiesbaden, Germany
Trusted Seller
FRITZ WERNER FV 2
- Manufacturer: Fritz Werner
No. 5100: 1 used Vertical milling machine make FRITZ WERNER, type FV 2,
Bensheim, Germany
Trusted Seller
Rotating, swivel and tilting table DECKEL
- Manufacturer: Deckel / Maho
Add-on Very well-maintained rotary, tilt, and swivel table, suitable for: FP 3 L; FP 3 LG; and FP 3 LV Further information 6 T-slots 16 mm, T-slot spacing 90 mm, horizontal rotation to the right and left by 45° e...
Wiesbaden, Germany
Trusted Seller
dividing head CARL ZEISS
- Manufacturer: Zeiss
Addition: Very well-preserved optical dividing head Accessories: Centering microscope, center punch, storage box Further information: Table diameter 400 mm, table with 8 12 mm T-slots, height 175 mm, space requir...
Wiesbaden, Germany
Ruhla FUW 200 Milling Machine
- Manufacturer: Ruhla
- Model: FUW 200
Good condition Ruhla FUW 200 Milling Machines manufactured in 1975. Located in Germany and other countries. Click request price for more information.
Germany