Used Milling Machines in Saxony, Germany

Trusted Seller
1984 ELU AS 70
- Manufacturer: Elu
- Model: AS 70
- Power requirement: 0.8 kilowatt
This milling machine is ideally suited for window. - long hole milling machine for aluminium - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V
Leipzig, Germany
Trusted Seller
1996 Hermle UWF 851 H
- Manufacturer: Hermle
- Model: UWF 851
- Power requirement: 15 kilowatt
Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be de...
Leipzig, Germany
Trusted Seller
Stankoimport 6H80
- Manufacturer: Stankoimport
- Power requirement: 3.2 kilowatt
- spindle center distance / clamping surface vertical: min/max: 50 / 350 mm - spindle nose / clamping surface horizontal: min/max: 0 / 350 mm - travel range of the milling bar 600 mm - without counterholder - inc...
Leipzig, Germany
Trusted Seller
1984 Wilhelm Grupp UF 20
- Manufacturer: Wilhelm Grupp
The spindle head can be swung out. Equipment: with coolant system with cooling water collecting tray Accessories div. milling cutters and milling shafts (comparable in the photo)
Leipzig, Germany
Trusted Seller
Optimum M3HS
- Manufacturer: Optimum
- Power requirement: 2.4 kilowatt
Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control uni...
Leipzig, Germany
Trusted Seller
PAGUS clamping table
- Manufacturer: Pagus
Clamping table, tilting table, milling table PAGUS used, tested !
$688 USD
Zschepplin, Germany
Trusted Seller
RECKERMANN Kombi 1000
- Manufacturer: Reckermann
- Model: KOMBI 1000
with vise Type of control: conventional | Freight basis: ex location Bitterfeld, free on truck | Storage location: GOG Bitterfeld | X-travel: 700 mm | Y-travel: 250 mm | Z-travel: 200 mm | Spindle taper iso: SK40...
Leipzig, Germany
Trusted Seller
1986 WMW FW 4.5
- Manufacturer: WMW
- Power requirement: 14.5 kilowatt
Equipment: 3-axis measuring device EISTA VISULESTA II E Accessories: Machine vice 155mm 2x counterholder and shaft 4x machine feet 2x cranks (for machine table and for vice)
Leipzig, Germany
Trusted Seller
1989 Deckel FP 2A
- Manufacturer: Deckel / Maho
- Model: FP 2
- Power requirement: 10 kilowatt
Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power.
Leipzig, Germany
Trusted Seller
1992 MAHO MH 800 W
- Manufacturer: Maho
- Model: MH 800
- Power requirement: 9.6 kilowatt
The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual ...
Leipzig, Germany
Trusted Seller
1972 STANKOIMPORT 6P10
- Manufacturer: Stankoimport
incl. accessories Type of control: conventional | Freight basis: ex location Bitterfeld, free on truck | Storage location: GOG Bitterfeld - Bestand | X-travel: 880 mm | Y-travel: 300 mm | Z-travel: 900 mm | W-axi...
Leipzig, Germany
Trusted Seller
1998 Röders RFM 760/S 4-axis
- Manufacturer: Röders
- Power requirement: 20 kilowatt
other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measur...
Leipzig, Germany
Trusted Seller
Emsil group Narwhal
- Manufacturer: Emsil group
This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's...
Leipzig, Germany
Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW 4 x 30 x 100 ( 4x30x100 ) TGL 30-4113 MK4 New !
$210 USD
Zschepplin, Germany
Trusted Seller
WMW Schmölln ApS-II F400 (FSS 400)
- Manufacturer: WMW
- Model: F400
VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange...
Leipzig, Germany