- Trusted Seller
1982 FLOTT SB 25
- Manufacturer: Flott
- Model: SB 25
- Throat depth: 300 millimeter
- Drilling diameter: 28 millimeter
Equipped with RÖHM Supra 3 - 16mm quick-action chuck Machine vice
Leipzig, Germany - Trusted Seller
1986 ALZMETALL AX 2
- Manufacturer: Alzmetall
- Model: AX2
- Throat depth: 250 millimeter
- Drilling diameter: 18 millimeter
Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Bore capacity in steel (diameter): 18 mm | Throat: 250 mm | Bore stroke: 100 mm | Drill capacity in cast...
Leipzig, Germany - Trusted Seller
2003 Strands S 25
- Manufacturer: Strands
- Model: S25
- Throat depth: 255 millimeter
- Drilling diameter: 25 millimeter
Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting
Leipzig, Germany - Trusted Seller
1976 BULMAK PK 031
- Manufacturer: BULMAK
- Throat depth: 320 millimeter
- Drilling diameter: 32 millimeter
Spindle right/left rotation Work table can be rotated and tilted left/right Coolant tank/coolant device Machine illumination
Leipzig, Germany - Trusted Seller
1989 ALZMETALL AB3ESV
- Manufacturer: Alzmetall
- Model: AB 3
- Throat depth: 285 millimeter
- Drilling diameter: 28 millimeter
The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height.
Leipzig, Germany - Trusted Seller
FLOTT TB 10-I
- Manufacturer: Flott
- Model: TB 10-I
- Throat depth: 190 millimeter
- Drilling diameter: 16 millimeter
Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable
Leipzig, Germany - Trusted Seller
1975 POWERMATIC HOUDAILLE Modell 1200
- Manufacturer: Powermatic
- Model: MODELL 1200
- Throat depth: 230 millimeter
- Drilling diameter: 32 millimeter
equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D.
Leipzig, Germany - Trusted Seller
2000 ALZMETALL AX2-T/S
- Manufacturer: Alzmetall
- Model: AX2
- Throat depth: 250 millimeter
- Drilling diameter: 18 millimeter
High-performance drilling machine Thread cutting in steel possible up to M 10 and cast iron up to M 14 equipped with Röhm 3 -16 mm quick-action chuck Operation via control panel / foot switch
Leipzig, Germany - Trusted Seller
PAGUS Tailstock
- Manufacturer: Pagus
Tailstock with quill and fixed center punch PAGUS with fixing screw used, tested !
$210 USDZschepplin, Germany - Trusted Seller
PAGUS Tailstock
- Manufacturer: Pagus
Tailstock, without quill PAGUS used, tested ! Tip height: 260 mm | Quill: approx. 200 mm | Quill diameter: Ø 80 mm | Foot: 320 x 235 mm | Backing plate 1: 175 x 68 mm, with screw | Backing plate 2: 183 x 12 mm, w...
$524 USDZschepplin, Germany - Trusted Seller
1957 WMW CM10
- Manufacturer: WMW
- Throat depth: 220 millimeter
- Drilling diameter: 20 millimeter
The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm
Leipzig, Germany - Trusted Seller
PAGUS Tailstock
- Manufacturer: Pagus
Tailstock PAGUS Tool holder: Outer diameter: Ø 78 mm, co-rotating Tool holder: inside diameter: Ø 58 / 53 mm, length: 105 mm, conical Ejector screw with handwheel Guide bush: Inner diameter: Ø 30 mm, length: 125 ...
$326 USDZschepplin, Germany - Trusted Seller
PAGUS tailstock with collet set
- Manufacturer: Pagus
Tailstock, 2 pieces, with collet set PAGUS for T-slot 8 / 10 mm 13 pairs of collets: Ø 1.0 mm - 7.0 mm, increasing by 0.5 mm in wooden box used, tested !
$920 USDZschepplin, Germany - Trusted Seller
PAGUS machine vice
- Manufacturer: Pagus
Machine vice PAGUS on table with graduation 360° rotatable 90° tiltable used, tested !
$338 USDZschepplin, Germany - Trusted Seller
WMW SAALFELD BK 40
- Manufacturer: WMW
- Model: BK 40
- Throat depth: 360 millimeter
- Drilling diameter: 40 millimeter
for thread cutting clockwise and counter clockwise operation
Leipzig, Germany
Tip: Enter manufacturer, model or keyword