Used Processing in Saxony, Germany

MTA model TAE EVO M10 water chiller

• Manufacturer: MTA
• Model: TAE

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, elec...

Melag 255 Hot air Steriliser/Drying cabinet

• Manufacturer: MELAG Medizintechnik

Melag 255 Hot air steriliser/drying cabinet. Dimensions: Outside: 740 x 360 x 320 mm (W x H x D) Inside: 500 x 200 x 240 mm (W x H x D) complete with trays.

Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations

• Manufacturer: Pester
• Model: PEWO fold

Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 3...

1992 Gessner 1CB 0206 B101

• Manufacturer: Gessner

Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the executi...

2003 FHR RC 200-2B

• Manufacturer: FHR

CIGS system/strip coating system for coating foils with copper, indium, potassium and selenium, strip width max. 200 mm, strip length max. 500 m, coating capacity 200 kW, connected load 60 kW, with control cabine...

planetary gear SP180, i=100

i=100 further information on request Update: last 07/30/2021

2006 HMS / Sander

• Manufacturer: HMS / Sander

CdS coating system, 50kW, 3 x 400 V, consisting of: 1 "Sander" unwinding unit, 1 inlet, 1 CdS coating chamber, 2 neutral zones, 1 cascade rinse, 3-way, 1 drying section, 1 "Sander" winder, 1 supply cabinet, for a...

OTTO KLEIN compressed air tanks

Pressure vessel, compressed air tank with holder OTTO KLEIN SHEET STEEL PROCESSING OKS 486315 RST372 used, tested !

2006 KKW RIEDEL PLB-S5HWE

• Manufacturer: KKW RIEDEL

Cooling of industrial processes Application = water cooling Water tank capacity 210 liters Refrigerant R22 Air intake via 4x mechanical air filters (750 x 750mm) 2x exhaust fan via ceiling Ø 500mm External operat...

1996 EFD MINAC 15 m/Cooler

• Manufacturer: EFD

The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and s...

PREBENA Aerotainer Case System: Mobile Compressor + Pressure Tester with Accessories

Manufacturer: Prebena • Range: Aerotainer 240 Plus / Aerotainer Twin Devices in the set: • Oil-free piston compressor (portable in case, 230 V, up to 8 bar) • Pressure test/storage device (with pressure gauge, ho...

2007 IVA INDUSTRIEOEFEN IVA 844 060/4

• Manufacturer: IVA INDUSTRIEOEFEN

MULTI-PURPOSE CHAMBER OVEN LINE Application: for heat treatment of small parts and piece goods, intended for the following heat treatment processes such as -hardening under protective gas -annealing, normalizing,...

2012 PadeltTherm HEU 9196/700

• Manufacturer: Padelttherm

Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of l...

2018 Belüftungsanlage IGETEC AG-500

Item Description/Artikelbeschreibung: Lot consists of: (1) Belüftungsanlage, (1) Outdoor Ventilation Unit. (1) Duct Silencer, (1) throttle Control, (1) Chiller Unit Position besteht aus: (1) Ventilation System, (...

2018 Belüftungsanlage IGETEC AG-500

Item Description/Artikelbeschreibung: Lot consists of: (1) Belüftungsanlage, (1) Outdoor Ventilation Unit. (1) Duct Silencer, (1) throttle Control, (1) Chiller Unit Position besteht aus: (1) Ventilation System, (...