Used Processing in Slovakia

2003 Wittmann W632-0268 Linear robot for spare parts
- Manufacturer: Wittmann
- Model: W 632
Condition: for repair. Now non-functional - missing Y-axis drive - sold for spare parts X 900, Y 1600, Z 3000 mm, load capacity 20 kg (was on injection molding machine KraussMaffei 250 ton)
Slovakia
Engel Victory VC750/150 Tech Injection Molding Machine, only 39.000hours (2003)
- Manufacturer: Engel
- Model: Victory 750/150
Engel VC750/150 , tiebarless machine Controll panel: CC100 Clamping force: 150 t Plate dimensions: 750x520 mm Opening Stroke: 605mm Screw dia: 50 mm Max. swept wolume 393 cm3 Injection rate: 283 cm3/s Inj...
Slovakia
SUSAKI Mold loader trolley for injection molding SE350US QMC
- Manufacturer: SUSAKI NAGOYA JAPAN
chain drive system manual handle type movement speed 45 mm/rev stroke up and down 350 mm parameters: - trolley: L x W x H: 2 x 1.8 x 1.6 m, weight 1.5 t, MFG. NO. 0409-112-1 - charger dimensions on the palle...
Slovakia
RESERVED: Arburg 420 C 1000-350 (2001)
- Manufacturer: Arburg
- Model: 420 C 1000-350
Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 40 mm Injection volume: 182 cm3 Shot weight: 153 g Working hours: 77.000 L x W x H 4700 x 1600 x...
Slovakia
1996 Arburg Allrounder 320 M 500 - 90, 50 t, missing system card
- Manufacturer: Arburg
NEGOTIABLE PRICE! Is sold in condion as is - Card: system missing Clamping force 50 t Srew 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control...
Slovakia
RESERVED: 1998 Arburg Allrounder 320 M 500 - 210, 50 t
- Manufacturer: Arburg
NEGOTIABLE PRICE! Clamping force 50 t Srew 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 101 ccm Control Multronica Core pullers - no Hotrunner zones ...
Slovakia
RESERVED (2008) Ferromatik MM 1000-6610 ,Screw: 90 mm
- Manufacturer: Ferromatik
MM 1000-6610 Ferromatik Clamping force: 1000 tons Screw diameter: 90 mm Injection pressure: 2300 bar Injection volume 2799 cm3 Injection shot: 2407 g Plattens dimensions: 2000 x 1605 mm Distance between ti...
Slovakia
2004 MTA Italy TAE402 Chiller
- Manufacturer: MTA
- Model: TAE
It was used as a cooling backup. Not under power Currently, 1 out of 4 compressors on the device is damaged. It has no effect on operation. That is, except for the reduced cold. power. It cooled approximately ...
Slovakia
RESERVED: Arburg 320C 600-250U (2001) Vertical / horizontal
- Manufacturer: Arburg
- Model: 320 C
Clamping force: 60 tons Distance between tie bars: 320 x 320 mm Clamping plates dimensions: 446 x 446 mm Mold Height min. / max. : 200 x 550 mm Max oppening: 350 mm Ejector path: 125 mm Screw diameter: 35 m...
Slovakia
(2011) Wittmann Battenfeld EcoPower 110/130 UNILOG B6, Electric machine
- Manufacturer: Battenfeld
Wittmann Battenfeld EcoPower 110/130 UNILOG B6 - clamping force 110 tons - screw diameter 25 mm - weight of the molding max 55.8 gPS - dimensions between guide columns 470x470 mm - min. tool height 200 mm - max....
Slovakia
RESERVED: 2012 Arburg Allrounder 375 V 500-290 Vertical Injection Molding Machine
- Manufacturer: Arburg
- Model: Allrounder
26835 motohours clamping force 50 ton screw diameter 30 mm closing pistons type of oil Optima 32ZP volume of liters 120 screw type % glass: PK-V 30%, type of srew D30 L=978 weight of molding max 92 g PS d...
Slovakia
2007 WOOJIN SELEX NS 110
- Manufacturer: WOOJIN SELEX
clamping force 110 tons screw diameter 30 mm AK glass + 30% weight of molding max 120 gPS dimensions between guide columns 410x410 mm min. tool height 150 mm max. tool height 400 mm closing the joint weig...
Slovakia
1995 Engel ES 1050/175 HL
- Manufacturer: Engel
- Model: ES 1050175 HL
srew dia 55 mm clamping force 175 t HxV 820x520 mm HxV 820x750 mm weight 11500 kg
Slovakia
Hydraulic clamping system PASCAL
- Manufacturer: Pascal Japan
Hydraulic clamping system PASCAL Force: 160kN Manufacturer: Pascal corp. , made in Japan
Slovakia
2007 GETECHA GRS 300 - A2.11 Mill - Granulator
- Manufacturer: Getecha
- Model: GRS300
Condition: very litle used, very good condition, year of made 11/2007
Slovakia
Wittmann W 733 Injection Molding
- Manufacturer: Wittmann
- Model: W 733
Good condition Wittmann W 733 Injection Moldings manufactured in 2008. Located in Slovakia and other countries. Click request price for more information.
Slovakia