Building Filters

Used Punch Presses in Thuringia, Germany

1979 KAISER PO 75 Z
- Manufacturer: Kaiser
- Model: PO 75 Z
- Power requirement: 7.5 kilowatt
- pneum. Ortlinghaus air clutch with additional brake - Infinitely variable speed control using Stöhrer drive - break plate - 2-hand control - additional platen - Air storage tank for clutch - circulating oil lub...
Schmölln, Germany
1990 HELMERDING ERH 75 B
- Manufacturer: HELMERDING
Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear train in an oil bath - Fixed table prepared for hanging tool changing consoles - 2 roller strips in the table ...
Schmölln, Germany
AMBOLD JH25 – 200
- Manufacturer: ambold
- pneumatic clutch - press safety valve, Herion - cam controller, Balluff - chain breakage monitoring - hydr. overload, HYDAC - motor. Ram adjustment with digital display - separate control cabinet with safety co...
Schmölln, Germany
AMBOLD PEEV 25.4
- Manufacturer: ambold pressen- und maschinenbau
- Ortlinghaus hydraulic clutch-brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch
Schmölln, Germany
AMBOLD PEEV 40.3
- Manufacturer: ambold pressen- und maschinenbau
- Power requirement: 3.5 kilowatt
- Ortlinghaus pneumatic clutch / brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch
Schmölln, Germany
1993 SMERAL S 160
- Manufacturer: Šmeral Brno
- Model: S 160
- Power requirement: 15 kilowatt
- Additional clamping plate - cross-grooved - foot switch - hydr. clutch - hydr. clamping ball spindle - hydr. overload - Flywheel brake - Hydraulics with oil cooler Machine can be partially overhauled by us for ...
Schmölln, Germany
2025 IWK PEKRD 125
- Manufacturer: ambold pressen- und maschinenbau
- Stroke length: 400 millimeter
- Power requirement: 16 kilowatt
– The machine has been partially overhauled – It has been completely disassembled and technically inspected – New seals – New pneumatic coupling – New seals in the compensating cylinder – New drive motor – New ba...
Schmölln, Germany
1988 HELMERDING ERH 100 B
- Manufacturer: HELMERDING
Equipment: - Final drive - shaft with 3 bearings - Semi-automatic stroke adjustment - circulating oil lubrication - Hydraulic clutch - Separate hydraulics with oil cooler The machine is partially overhauled by us...
Schmölln, Germany
1958 RICHTER PED 160
- Manufacturer: ambold pressen- und maschinenbau
2003 Modernization / Retrofitting The following work is still to be carried out on the machine: - new control cabinet with ABB SPS - separate two-hand control input with foot switch - Vogel loss lubrication
Schmölln, Germany
KEPROMA AG DOD 40/100
- Manufacturer: ambold pressen- und maschinenbau
- Demonstration model with branded overhauled control system - NC roll feed servo power with direct drive - plasma nitrided rolls - backlash free drive - strip side guide Performance data at 180 degrees - 1000 st...
Schmölln, Germany
1969 ZEULENRODA PEDN 63/2
- Manufacturer: Zeulenroda
- Power requirement: 6 kilowatt
- inclinable - ram is equipped with breaking plate safety device - table clamping plate - Ram adjustment by means of ratchet - Balluff cam indexing system Machine is not safe for manual insertion operation!
Schmölln, Germany
1978 MÜLLER CD 63.12.14
- Manufacturer: Muller
- Power requirement: 22 kilowatt
- workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder
Schmölln, Germany
1986 JELSINGRAD BPA 15
- Manufacturer: Jelsingrad
Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | 1 seção: - mm | Hubzahlen per minute: 200 – 2000 | Table surface: - mm | Ram surfa...
Schmölln, Germany
1980 Schuler CR 80-345
- Manufacturer: Schuler
- Model: CR 80-345
- Stroke length: 480 millimeter
Additional Information: - the machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate control cabinet with touchscreen including cabling * N...
Schmölln, Germany
1981 MÜLLER SZ 40.30.1
- Manufacturer: Muller
- Model: SZ 40301
- Power requirement: 15 kilowatt
with hydr. Die cushion speeds: Rapid advance speed 240 mm / s continuously adjustable
Schmölln, Germany