Used Stone Equipment in Hamburg, Germany

1989 Arbes STH 140-25-
- Manufacturer: Arbes
Gang saw Maximum block size is 3000 x 1800 mm Maximum 26 blades Push rod stroke 750 mm Main motor has 55 kW and operates at approximately 65 strokes per minute. Lowering speeds range from 0 to 300 mm per hour. Wa...
Hamburg, Germany
2002 Marmo Meccanica LTH 7212-
- Manufacturer: Marmo Meccanica
- Model: LTH 7212
Edge polisher machine for straight and round edges Calibrator / water nose Chamfers inclined at 45° (diameter 120-130 mm) 7 polishing heads Additional lower chamfer inclined at 45° (diameter 120-130 mm) 2 rollers...
Hamburg, Germany
2004 PELLEGRINI DF 2500
- Manufacturer: Pellegrini
- Model: DF2500
Fixed wire saw Pellegrini DF 2500 with fixed diamond wire Pellegrini DF 2500 with portal diamond wire Electrically rotating carriage Voltage: 380 Hz 50 V More used machines at: www.janssen-usedmachines.com New st...
Hamburg, Germany
2005 Montresor Lola 1000-
- Manufacturer: Montresor
- Model: Lola 1000
Edge polisher machine for straight edges Number of polishing spindles: 8 Number of chamfering spindles: 4 Working thickness: 60 or 100 mm Working direction: from right to left Complete with: - Calibrator - Drip n...
Hamburg, Germany
2003 Montresor LUNA 640-
- Manufacturer: Montresor
- Model: Luna
EDGE POLISHERS No. 6 polishing heads No. 2 diamond bevel units No. 2 bevel unit with grinding wheels No. 1 blade cutting unit No. 1 drip cutting unit More used machines at: www.janssen-usedmachines.com New stone ...
Hamburg, Germany
2014 GASPARI MENOTTI GMW 700 MK2-
- Manufacturer: Gaspari Menotti
Multiwire 26 ropes max 26/24 ropes 7.3 mm incl. 2 block trolleys Block size 3500x2200x700mm More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de
Hamburg, Germany
2002 Comandulli EDILUX 8+4 DX
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for straight edges Number of polishing spindles: 8 Number of chamfer spindles: 2+2 Max. processable thickness: 100 mm Complete with: - Drip nose - Calibrator Working direction: from right t...
Hamburg, Germany
2009 BRETON Countourbreton NC 260 K 23-
- Manufacturer: Breton
- Model: NC260
CNC machining center 1-24 a new spindle was installed Tool magazine: 26 positions Steep taper, angle gear with saw blade and vacuum suction cup are supplied with the machine The machine is supplied with a 2nd ful...
Hamburg, Germany
2006 PELLEGRINI DF 2000 top-
- Manufacturer: Pellegrini
- Model: DF2000
Wire saw overhauled (pictures not yet overhauled) The overhaul includes: Sandblasting Painting Replacement of bearings, nuts, seals, pipes (and everything that goes with it) Overhauled trolley Repair of hubcaps T...
Hamburg, Germany
2004 BM Diamond 80L C800
- Manufacturer: B.M. Officine
- Model: Diamond
80 blades gang saw for marble Stroke 800 mm Cutting capacity 3200 x 2000 x 2000 mm Blade length 4,400 mm Engine power 110 kW Number 1 block trolley Number 2 block baskets Machine in good working condition (80 bla...
Hamburg, Germany
2011 Bacci Dino LPL 80/106-
- Manufacturer: Bacci
Calibration and polishing machine Maximum working width: 800 mm Maximum working thickness: 70 mm Calibration spindles: 1 Polishing spindles: 6 Calibration spindle power: 22 kW Polishing spindle power: 5.5 kW Work...
Hamburg, Germany
2002 PELLEGRINI DF JOLLY 2500-
- Manufacturer: Pellegrini
- Model: DF2500
Wire saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. No. 2 + 1 axis (270° rotation axis, small wheels) Motorized and rotating carriage for multiple cuts (the ...
Hamburg, Germany
1995 Levi Tunisi LT 1204-
- Manufacturer: Levi Tunisi
- Model: LT
Block cutter for marble complete with unloading and cross cutter (crosscut saw) Saw blade 1,550 mm Motor 150 hp Complete with trolley, unloading and crosscut saw Voltage V. 380 Hz 50 More used machines at: www.ja...
Hamburg, Germany
Pedrini B220MA-18
- Manufacturer: Pedrini
Grinding line with 18 heads (Frankfurter) Complete line including: Tilt-mounted loading table and motorized roller table at the inlet Roller table and tilt-mounted unloading table at the outlet More used machines...
Hamburg, Germany
2002 Comandulli EDILUX 8+4 DX-
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...
Hamburg, Germany