- Trusted Seller
Spaldings 12825
- Manufacturer: Spaldings
- Working width: 2.85 meter
Excellent wearing metal. C/w adjustable depth wheel and looks to have done little work. Pivots are all tight and ready to work! Current transport width is 3.1m however can be reduced to 2.85m by reversing the dep...
$4,295 USDRoyston, United Kingdom - Trusted Seller
2005 Maschio Erpice Aquila RAP 6000
- Manufacturer: Maschio - Gaspardo
- Working width: 6 meter
Hydraulic folding, c/w rear crumblers. Runs up reasonably well. Fitted with good blades and hydraulic adjustment on the packers.
- Trusted Seller
Bomford 2 Leg Subsoiler
- Manufacturer: Bomford
Strong machine – c/w depth wheels Legs set at 65″ spacing but can be adjusted. 3m transport width. Depth wheels would benefit from new tyres.
$1,520 USDRoyston, United Kingdom - Trusted Seller
Waspe Mole drainer
- Manufacturer: Waspe
Hydraulic lift Comes with 4″ (100mm) ceramic expander. Ram rod bent as pictured but all works ok.
$2,213 USDRoyston, United Kingdom - Trusted Seller
Kverneland LA8
- Manufacturer: Kverneland
C/w trash boards and skimmers. Turns over well and is fitted with rear discs, depth wheel and still on its original No. 8 bodies. Boards are very good.
$2,973 USDRoyston, United Kingdom - Trusted Seller
Dalbo Rollomat 630x50
- Manufacturer: Dal-Bo
- Working width: 6.3 meter
Fitted with 500mm rings with breakers. Folds well and in reasonable condition. 3m transport width.
$2,312 USDRoyston, United Kingdom - Trusted Seller
Ransomes TS88
- Manufacturer: Ransomes
To suit Track Marshall crawler or similar. Fitted with TCN mouldboards, discs, skims and rear depth wheel.
$3,237 USDRoyston, United Kingdom - Trusted Seller
2004 Simba XP/5.5M/FW
- Manufacturer: Simba
- Working width: 5.5 meter
Fitted with track eradicator tines. 2 rows of angle adjustable discs and rear DD packer. Plenty of life remaining on the discs and good tyres.
- Trusted Seller
Armer Mole drainer
- Manufacturer: Armer
C/w good wearing parts Hydraulics and cable lift system all working correctly. Fitted with trash knife.
$1,652 USDRoyston, United Kingdom - Trusted Seller
KRM Disc-O-Mulch Gold 3m
- Manufacturer: KRM
- Working width: 3 meter
C/w 600mm V roller Fitted with 2 rows of sprung mulching discs. Currently 3.13m transport width but can be reduced to 3m.
- Trusted Seller
1986 Simba MK2B N/C F/W DISC
- Manufacturer: Simba
- Working width: 5.1 meter
Good discs! An older machine but in good condition. C/w hydraulic front gang angling, rear drawbar and aux hydraulics and folds to sub 3m for transport. Tyres are perished but holding air and seem sound.
- Trusted Seller
1995 Dowdeswell DP8A
- Manufacturer: Dowdeswell
- Model: DP8A
SCN bodies and full set of skimmers 2+1+1 configuration, steel depth wheel and manual front furrow adjustment. A mix of boards, some are sharp some nearly new. Turns over but there is some wear in the headstock.
$1,288 USDRoyston, United Kingdom - Trusted Seller
2000 Cousins TYPE28R360M
- Manufacturer: Cousins
- Working width: 3.6 meter
Cast ring double packer. Leading tines with shearbolt protection, Springboard hydraulic levelling paddles and 28″ 45° cast rings.
- Trusted Seller
Bomford 2 Leg Subsoiler
- Manufacturer: Bomford
- Working width: 2.6 meter
C/w Flexi-Coil packer Useful tramline buster or strong 8ft frame to adapt. 100mm box frame. Subsoiling legs set at 5ft / 152cm. Transport width: 2.6m
$1,520 USDRoyston, United Kingdom - Trusted Seller
Taylor Gent Flat-Lift
- Manufacturer: Taylor
- Working width: 2.3 meter
Comes with depth wheels An older machine but in good order through out with very little wear showing in the pivots. Legs are good for plenty of work yet.
$2,577 USDRoyston, United Kingdom
Tip: Enter manufacturer, model or keyword