Machine Tools » Lathes » Automatic Lathes » Aichi

Building Filters

22

Used Automatic Lathes in Aichi, Japan

2006 HOWA OHKUMA 2SP-10HG
- used
- Manufacturer: Okuma
- Model: 2SP-10HG
Distance between both spindles: 310mm,. Max. machining: ø100*100mm, Main spindle through-hole diameter: φ52mm 50～5000rpm, S:(X)150*(Z)175mm In case of any discrepancy between the description and the actual produc...
Toyohashi, Japan
2017 DMG Mori Seiki AA-1
- used
- Manufacturer: DMG Mori
Parallel 2-spindle lathe, Control: FANUC 0i-TF Control: FANUC 0i-TF, Standard workpiece: Φ50×50mm Travel: (X)147.5(Y)50(Z)170㎜, Milling speed: (X direction)MAX10,000(Z direction)MAX5,000min, Tool post: octagonal ...
Toyohashi, Japan
2017 DMG Mori Seiki AA-1
- used
- Manufacturer: DMG Mori
Parallel 2-spindle lathe, Control: FANUC 0i-TF Control: FANUC 0i-TF, Standard workpiece: Φ50×50mm Travel: (X)147.5(Y)50(Z)170㎜, Milling speed: (X direction)MAX10,000(Z direction)MAX5,000min, Tool post: octagonal ...
Toyohashi, Japan
2014 Takamatsu XW130
- used
- Manufacturer: Takamatsu
FANUC 0i-TD,. Max. processing: 280*155mm dia. Swing: 250mm dia. Main spindle through-hole diameter: φ61mm, 4000rpm 4000rpm, S:X150*Z150mm S:X150*Z160mm, 8-inch chuck, 8 square turrets Each octagonal turret, with ...
Toyohashi, Japan
2004 Techno-Washino G04-UP
- used
- Manufacturer: Washino
Control: FANUC 21i-TB,. Maximum swing: Φ220,, Standard machining diameter Standard machining diameter: Φ30×30,, Chuck: Air chuck (PMT 100-3-2.5), Max. swing: Φ220 Chuck: Air chuck (PMT 100-3-2.5) Travel: (X)220(Z...
Toyohashi, Japan
2017 Murata Machinery MW50HG
- used
- Manufacturer: Murata
MURATA-FANUC,. Max. machining diameter: φ50, Max. machining length: 50mm, Max. Max. machining length: 50 mm Comb blade tool post*2, With gantry loader, With gantry loader, With gantry loader With gantry loader Wi...
Toyohashi, Japan
1998 Takizawa Ironworks TAC510×1000
- used
- Manufacturer: Takizawa Iron Works
FANUC 20T,. Swing over bed:510mm,. Distance between centers:1000mm, S:X285*Z955mm, 15 to 1500rpm, 3-jaw 10-inch chuck (Kitagawa JN10T), with splash cover With splash cover If there is any discrepancy between the ...
Toyohashi, Japan
2002 Techno Washino C3
- used
- Manufacturer: Washino
- Model: C3
FANUC-21i-T, Swing above bed: φ550mm, Center distance: 800mm, S: 340mm x 650mm, 23-1800 rpm (16 speeds), 3-jaw 9-inch chuck *If there are any discrepancies between the product description and the actual product, ...
Toyohashi, Japan
2004 Nakamura-Tome Precision Industry WT-150
- used
- Manufacturer: Nakamura
Opposed 2-spindle, 2-turret type FANUC-18iTB, Swing:190mm, Max. machining: 190*400, S:X1157.5*X2167.5*Z1465*Z2465*Y±Y S:X1157.5*X2167.5*Z1465*Z2465*Y±35 L spindle: 5000rpm (non-step), R spindle: 5000rpm (non-step...
Toyohashi, Japan
2007 Techno Washino G06
- used
- Manufacturer: Washino
Control: FANUC 0i-TB. Swing: Φ285,. Standard workpiece: Φ60×60,. Spindle speed: 6,000rpm, Travel: (X)300(Z)285㎜, Tool post: comb type, Standard workpiece: Φ60×60, Spindle speed: 6,000rpm, Tool post: comb type, St...
Toyohashi, Japan
2018 Murata Machinery MW50HG
- used
- Manufacturer: Murata
MURATA-FANUC32iB, Maximum machining capacity: φ50*50mm, 2 gang tool rests, 6-inch chuck, 6000 rpm *If there are any discrepancies between the product description and the actual product, the actual product will ta...
Toyohashi, Japan
2016 Murata Machinery MW80
- used
- Manufacturer: Murata
MURATA-FANUC32iB, Maximum cutting speed: φ80*50mm, S:(X)320*(Z)200mm 6000rpm, Gang tool post x 2 *If there are any discrepancies between the product description and the actual product, the actual product will tak...
Toyohashi, Japan
Nakamura-Tome TW-10MM
- used
- Manufacturer: Nakamura
- Model: TW-10MM
FANUC 18i-T,. Swing: 210mm dia. Max. processing: ø210*155mm, 55～5500rpm, ATC:12*2 pcs. In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
2013 Amada Machine Tools G-05
- used
- Manufacturer: Amada
Control: FANUC 0i-TD,. Swing: Φ230 mm,, Standard workpiece: fai50×40 mm,, Standard workpiece: fai50×40 mm Standard workpiece: fai50×40㎜,, Standard workpiece: fai50×40㎜,, Standard workpiece: fai50×40㎜, Spindle spe...
Toyohashi, Japan
2004 Kawaguchiko Precision NL-10B
- used
- Manufacturer: Kawaguchiko Precision
Control: FANUC 21i-T,. Max. machining diameter: Φ10×50mm, Max. drilling diameter: Φ5mm Max. drilling diameter: 5 mm dia. Max. threading diameter: M5, Max. threading diameter: M5 Spindle speed: 6,000rpm, Chuck: Co...
Toyohashi, Japan

12

Overview

Automatic lathes are specialized machine tools designed to perform high-precision turning operations with minimal human intervention. These machines are commonly used in mass production settings for manufacturing intricate parts, such as screws and bolts, with consistent quality and efficiency. Their automation capabilities make them ideal for industries requiring high volumes of small, detailed components.

FAQ

What should I consider when buying a used automatic lathe?

Consider the machine's age, overall condition, brand reputation, and any included features or accessories. Check for maintenance records and operational hours to assess wear and tear.

How do I ensure the automatic lathe is shipped safely to my location?

Use a reputable transport service that specializes in heavy machinery. Ensure the lathe is properly secured and protected during transit to prevent damage.

What is the maintenance schedule for an automatic lathe?

Regular maintenance includes checking lubrication systems, inspecting and replacing worn parts, and ensuring proper alignment and calibration. Consult the manufacturer’s manual for specific maintenance intervals and procedures.