Used Industrial Furnaces & Ovens

MIM Furnace

This is a small hydrogen MIM furnace. It needs a rebuild--the current owner (furnace builder) is offering it as-is or rebuilt for $35,000.00 Specifications 8" x 8" x 12" Deep Work Zone 2400F Operating Temperature...

T-7 Integral Quench Furnace

• Manufacturer: IPSEN INDUSTRIES.

Specifications CONTROLS: Free Standing Control Panel with SIEMENS PLC and all required components. DESCRIPTION: Brick Lined Internal Quench Furnace (Straight Thru) complete with Top-Mounted Alloy Circulating Fans...

T-4 Integral Quench Furnace

• Manufacturer: IPSEN INDUSTRIES.

Specifications CONTROLS: Free Standing Control Panel with SIEMENS PLC and all required components. DESCRIPTION: Brick Lined Internal Quench Furnace (Straight Thru) complete with Top-Mounted Alloy Circulating Fans...

Vacuum Brazing Furnace

• Manufacturer: Vac Aero

Built by Vac Aero this is a Model VAH2636 vacuum brazing furnace with working dimensions of 23” wide X 18” high X 36” deep. Furnace was lightly used in an in house heat treating department. Complete and in good c...

Rebuilt Temper Furnace

• Manufacturer: Despatch

Temper furnace with (3) independent stations. Rebuilt. New heating elements, new hearth ceramics, New stainless steel side panels, new paint. Specifications Manufactured ~1980, 3-Station, Temper Furnace, Type: ...

2014 Top Loading Tempering Furnace

• Manufacturer: JPW Oven Design

Specifications Top Loading Tempering Furnace Like New Condition, has never been used Stainless Steel Lined Recirculating, 10 H.P. Alloy Recirculating Fan Insulated Floor (Good for 20,000# Loads) Hydraulic “Tilt-B...

Box Temper Furnace

• Manufacturer: Grieve
• Model: HC-1250

This is a great furnace if you are willing to do some repairs. The following items need repairs: Some elements, fan motor, controls, louvre/stud, door seal, minor cracks at base of door (just need welding). Speci...

Bell Lift-off Furnaces

• Manufacturer: Drever

Natural gas fired---26 U-shaped radiant tubes, ceramic fiber lined, 1650F max, 4 roof mounted alloy recirculating fans, atmosphere capable, "knife edge" seal with gaskets, hydraulic lift mechanism on each end of ...

Atmosphere Box Furnace

• Manufacturer: Pathways Thermal

Specifications Mfr: Pathways Thermal Technologies, Inc. (support still avail.) Work Zone: Approx. 18" Dia. 18"L Retort Size, Horizontal, current racking for 12"W x 12"D x 8"H work area Model 182525 Location: Paci...

Car Bottom Furnace with Exothermic Atmosphere 1450°F

• Manufacturer: Williams Industrial Service, Inc.

This unit is a tube fired car bottom unit with an operating range from 500F to 1450F. The maximum loading is 35,000 pounds. The car and door are manually operated by the furnace operator. The furnace is equipped ...

Vacuum Oil Quench Furnace

• Manufacturer: C.I. Hayes

Specifications Footprint: 5' wide x 9' 6" long x 8' 5" high Furnace only - not including pumps, transformer Controls: Controls are mounted and wired in a separate enclosure. There is a Honeywell DCP 511 programma...

Two Drever Lift-Off Atmosphere Furnaces

• Manufacturer: Drever

Natural gas-fired—26 U-shaped radiant tubes, ceramic fiber-lined, 1650°F max, 4 roof-mounted alloy recirculating fans, atmosphere capable, “knife edge” seal with gaskets, hydraulic lift mechanism on each end of f...

CI Hayes “Tube” Furnace

• Manufacturer: C.I. Hayes

Manufactured by CI Hayes this is a High Temp. “moly” Wire Wound Tube Furnace, Model MY-0002.528 (MY-10). Price Includes A Multiple Tray Loader

Draw / Temper Box Furnace

• Manufacturer: Pacific Scientific Model# FA243618

Specifications Gas circulation fan in rear of furnace. Owner can load the furnace on a truck at their location (no rigging required). Furnace weighs about 3,000 lbs.

Nabertherm N641 Industrial Furnaces & Oven

• Manufacturer: Nabertherm
• Model: N641

Good condition Nabertherm N641 Industrial Furnaces & Ovens manufactured in 2008. Located in United Arab Emirates and other countries. Click request price for more information.