Building Filters
OKUMA
- Manufacturer: Okuma
- Model: FUB-P4R2
Came Out of A Okuma MC-20 5-Axis Grinding Center 1911-2242-142-011 VER. 2.0 Opus 7000 Card Asset In Stock And Available Immediately
Watertown, CT
Okuma FUB-P4M4 E4809-045-174 Card 4 Available
- Manufacturer: Okuma
- Model: FUB-P4M4
Came Out of A Okuma MC-20 5-Axis Grinding Center 5 Available List Price is per unit
Watertown, CT
Okuma FUB-DR3 Opus7000 Servo Drive Control Card PLC Board
- Manufacturer: Okuma
- Model: FUB-DR3
Came Out of A Okuma MC-20 5-Axis Grinding Center Ver No. 1.0.4 1911-2870- Servo Drive Control Card 2 Available- List price is Per Unit
Watertown, CT
Tosoku Okuma Handy Controller HC111 4 Axis Hand Wheel
- Manufacturer: Okuma
Made in Japan Manual Pulse Generator 4 Axis Hand Wheel Controller Okuma Hand Controller 12V 100PPR
Watertown, CT
OKUMA FUB-PH/DA 1911-2244-37-11 OPUS7000 100-120V 50/60HZ
- Manufacturer: Okuma
Came Out of A Okuma MC-20 5-Axis Grinding Center 4 Available- List Price is per unit 1911-2244-37-11 Opus 7000
Watertown, CT
Okuma Howa Millac 4VA CNC Vertical Mill Fanuc 15M New 1989
- Manufacturer: Okuma
- Model: MILLAC
- Spindle taper: CAT 40
2 AVAILABLE - one is underpower and working well, the other one has a bad computer board but otherwise was working. For parts or repair... Selling one or both, List price is For BOTH Contact us for more informati...
Watertown, CT
Okuma Oil Hydraulic Unit Nikkan 182791 20 Gallon Tank 350 PSI
- Manufacturer: Okuma
Hydraulic Oil Pump From A Okuma CNC Grinding Center It used for other hydraulic Applications Overall In Amazing Shape Came Out of Working Machine System Daikin Motor And Pump 2hp 200/220V 14.8 cm3/rev Clockwise R...
Watertown, CT
Okuma Simulturn 4 axis Turning Center Model LC40-2ST Mint
- Manufacturer: Okuma
- Model: LC40-2ST
- Spindle bore: 52 mm
• Model LC40-2ST • Serial No. 0204 - 2008 Machine is in excellent almost freakish clean condition • 480 Volt 70 kVA – wired now this way • 12 Position turret • 8 Position lower turret with Subspind...
Watertown, CT- Trusted Seller
Okuma Multus U3000 2SW/1500 CNC Lathe - Multi-Axis 2015, 3205
- Manufacturer: Okuma
- Model: U3000 2SW1500
Maximum Turning Diameter: 25.59" Maximum Distance Between Centers: 59.05" Main Spindle Speed Range: 5,000 RPM Milling Speeds: 12,000 RPM Spindle Nose: A2-6 X-Axis Travel: 25.39" Y-Axis Travel: 9.84" Z-Axis...
Enfield, CT - Trusted Seller
Okuma Multus U4000 2SW/1500 CNC Lathe - Multi-Axis 2015, 3208
- Manufacturer: Okuma
Maximum Turning Diameter: 25.59" Maximum Distance Between Centers: 78.74" Main Spindle Speed Range: 4,200 RPM Milling Speeds: 12,000 RPM Spindle Nose & Sub Spindle: JIS A2-8 X-Axis (Upper): 27.36" X-Axis (L...
Enfield, CT - Trusted Seller
Okuma Multus U3000 2SW/1500 CNC Lathe - Multi-Axis 2015, 3206
- Manufacturer: Okuma
- Model: U3000 2SW1500
Maximum Turning Diameter: 25.59" Maximum Distance Between Centers: 59.05" Main Spindle Speed Range: 5,000 RPM Milling Speeds: 12,000 RPM Spindle Nose: A2-6 X-Axis Travel: 25.39" Y-Axis Travel: 9.84" Z-Axis...
Enfield, CT - Trusted Seller
Okuma Multus U3000 2SW/1500 CNC Lathe - Multi-Axis with Milling Capability 2014, 3207
- Manufacturer: Okuma
- Model: U3000 2SW1500
Maximum Turning Diameter: 25.59" Maximum Distance Between Centers: 59.05" Main Spindle Speed Range: 5,000 RPM Milling Speeds: 12,000 RPM Spindle Nose: A2-6 X-Axis Travel: 25.39" Y-Axis Travel: 9.84" Z-Axis...
Enfield, CT 
2014 Okuma Millac 33T vertical multitasking machine, Fanuc 31i-Model A, year 2014 #3499
- Manufacturer: Okuma
- Model: MILLAC 33
Asset Description Notes: Okuma Millac 33T combination three axis vertical lathe/vertical machining center. Max cutting diameter 9.84" Max cutting length 8.66" Max. swing diameter 18.11" Max Table Capacity 440 lbs...
1990 Okuma MCV-16A Double Column Vertical Machining Center, 25HP, OSP5000M-G control, excellent condition #3700
- Manufacturer: Okuma
- Model: MCV16A
Asset Description Notes: Okuma MCV-16A Double Column Vertical Machining Center Table Size 40 x 110" Max Table Capacity 8000 lbs Travels: X 118" (Table F-B) Y 63" (spindle head L-R) Z 15.70" (quill) A 39.37" (cros...
Okuma MILLAC 33 Machining Center
- Manufacturer: Okuma
- Model: MILLAC 33
Good condition Okuma MILLAC 33 Machining Centers available between 2004 and 2014 years. Located in USA and other countries. Click request price for more information.
USAOkuma LC40-2ST CNC Lathe
- Manufacturer: Okuma
- Model: LC40-2ST
Good condition Okuma LC40-2ST CNC Lathes manufactured in 1985. Located in USA and other countries. Click request price for more information.
USA