Building Filters
2008 Okuma ESL8-IIM CNC Turning Center
- Manufacturer: Okuma
17.7” X 20.47” CNC Turning Center with Live Tooling, Okuma OSP-P200L Control and a Chip Conveyor. Okuma OSP-P200L Control and a Chip Conveyor.
Lithia, FL
2018 OKUMA GENOS L250II-E
- Manufacturer: Okuma
- Model: GENOS L250
- Spindle bore: 52 mm
Tool Presetter Tailstock Parts Catcher Bar capacity: 2" | Chuck size: 8" | Spindle speed: 3,800 RPM | Swing: 17.7in | Turning diameter: 8.66in | Distance between centers: 18.5in | Turret: 12 Station | Chip remova...
2018 OKUMA LB45III
- Manufacturer: Okuma
- Model: LB45 III
- Spindle bore: 7.28 mm
Specifications (subject to buyer verification): Swing Over Bed: 33.46 MT#5 Live Quill with Hydraulic Actuation Manual Touch Setter Side Exit Chip Conveyor Kitagawa B18 18 3-Jaw Chuck Kitagawa Drawtube; 1302/1282;...
2004 OKUMA L370BB
- Manufacturer: Okuma
Big Bore Spindle Nose A2-8 Dimensions: OSP-E100L Chip Conveyor Tool Presetter Tailstock
2014 OKUMA GENOS L300MYW
- Manufacturer: Okuma
- Model: GENOS L300
- Spindle bore: 3.15 mm
OSP-P300L-R Chip Conveyor Tool Presetter Parts Catcher Live Tooling Sub Spindle 10" Kitagawa B210 3-Jaw Hydraulic Chuck on Mainspindle Royal 5C Collet Chuck on Subspindle Full C-Axis on Main & Subspindles (2) Liv...
2004 OKUMA ESL8 II
- Manufacturer: Okuma
- Spindle bore: 2.44 mm
Chuck size: 8" | Spindle speed: 4,200 RPM | X axis travel: 6.1" | Z axis travel: 20.47" | Turret tools: 12 Station | Rapid rate x axis: 787 IPM | Max turning dia: 8.27" | Max turning length: 19.68" | Max swing: ...
2018 OKUMA GENOS L250
- Manufacturer: Okuma
- Model: GENOS L250
- Spindle bore: 52 mm
Description: Machine is currently under power and in daily use; hours may vary at time of pickup. Available for inspection by appointment. Kept in a clean, climate-controlled machine shop Parts catcher box has be...
2022 OKUMA GENOS L2000E
- Manufacturer: Okuma
- Model: GENOS L2000
Bar Capacity: Chuck Size: Spindle Speed: Spindle Motor: X Axis Travel: Z Axis Travel: Rapid Rate Z Axis: Turret Tools: Rapid Rate X Axis: Max Turning Dia: Max Turning Length: Max Swing: Dimensions: Weight: Chip C...
2013 OKUMA LT3000EX
- Manufacturer: Okuma
- Model: LT3000 EX
MAX SWING OVER SADDLE 21.66" DISTANCE BETWEEN CENTERS 47.25" X1 / X2 TRAVEL 10.04" Z1 AXIS TRAVEL 36.6" Z2 AXIS TRAVEL 37" AXIS TRAVEL Y1/Y2 4.92" C-AXIS 0.001 DEG SUB SPINDLE SPEED 5,000 RPM SPINDLE NOSE A2-6 SP...
2006 OKUMA LU300
- Manufacturer: Okuma
- Model: LU300
- Spindle bore: 52 mm
Dimensions: OSP-E100L Chip Conveyor Tool Presetter Y Axis
2000 OKUMA LT25
- Manufacturer: Okuma
- Model: LT25
OSP-U100L Sub Spindle Bar capacity: 2.75" | Chuck size: 10" | Spindle speed: 3,500 RPM | Spindle motor: 30 HP | X axis travel: 19.67" | Z axis travel: 60" | Rapid rate z axis: 1,575 IPM | Turret tools: 12 Station...
Sanford, FL
2003 OKUMA MACTURN 250W
- Manufacturer: Okuma
- Model: Macturn 250
OSP Chip Conveyor Sub Spindle 5 Axis Bar capacity: 2" | Chuck size: 8" | Spindle speed: 5,000 RPM | Spindle motor: 30 HP | Max turning dia: 21.65" | Max turning length: 46.06" | Max swing: 20.87" | Cnccontrol: OSP
2007 OKUMA L470M
- Manufacturer: Okuma
- Model: L470M
Currently Wired 220V/480V Electrics OSP P200L Chip Conveyor Tool Presetter Tailstock Live Tooling C Axis Spindle Rotation .001 Degree 15" 3 Jaw Kitagawa Hydraulic Chuck Royal Filtermist FX900 Mist Collector USB P...
2014 OKUMA GENOS L300MW
- Manufacturer: Okuma
- Model: GENOS L300
OSP-P300L-R Chip Conveyor Tool Presetter Parts Catcher Sub Spindle Coolant Thru Sub spindle
Florida, USA
2013 Okuma Genos L400 CNC Lathe
- Manufacturer: Okuma
- Model: GENOS L400
- Spindle bore: 52 mm
15.35” X 19.68” CNC Lathe with OSP-P200L-R CNC Control, A2-8 Spindle Nose, Chip Conveyor and All Available Manuals. OSP-P200L-R CNC Control, A2-8 Spindle Nose, Chip Conveyor and All Available Manuals.
Lithia, FL
Okuma LT25 CNC Lathe
- Manufacturer: Okuma
- Model: LT25
Good condition Okuma LT25 CNC Lathes available between 1998 and 2000 years. Located in USA and other countries. Click request price for more information.
USA