Building Filters

Used computing

Trusted Seller
1999 Okuma MX-45VAE CNC Vertical Machining Center
- Manufacturer: Okuma
- Model: MX45VAE
- Spindle taper: CAT 40
Features: OSP-700M CNC Control 20-Position Automatic Tool Changer 4/5 Axis Table Hand-Held Pendant Fully Enclosed Equipped With: OSP-700M CNC Control 20-Position Automatic Tool Changer 4/5 Axis Table Hand-Held Pe...
Melville, NY
Trusted Seller
Okuma MX-45VBE CNC Vertical Machining Center, 1997
- Manufacturer: Okuma
- Model: MX45
- Spindle taper: CAT 50
Equipped with: Okuma OSP700M CNC Control *All Tool Holders Included, Vices not Included* | X axis travel: 30.0 in | Y axis travel: 18.0 in | Z axis travel: 17.7 in | Spindle motor: 15.0 hp | Spindle speed: 7000...
Los Angeles, CA
Trusted Seller
2000 OKUMA MX-45VAE
- Manufacturer: Okuma
- Model: MX45VAE
Spindle USB Port X: 30" | Y: 18.8" | Z: 17.72" | Power: 10 hp | Rpm: 7,000 RPM | # atc: 20 | Taper: BT-40 | Table-w: 39" | Table-l: 20" | # axis: 3
Ohio, USA
Trusted Seller
1998 OKUMA MX-45VAE CNC MACHINING CENTER, SERIES 0908-9070. USED IN AS-FOUND CONDITION. PURCHASE ORDER 23 23 1653 3023042.
- Manufacturer: Okuma
- Model: MX45VAE
20" x 40" Table Travel X Axis - 30" Travel Y Axis - 18.1" Travel Z Axis - 17.7" Spindle Speed - 12,000 RPM Spindle Taper - 40 Tool Magazine Capacity - 20 OSP 700M Control Dimensions, Approx - 89" x 68" x 98" Weig...
Hermosillo, Mexico
Trusted Seller
1997 OKUMA MX-45VAE
- Manufacturer: Okuma
- Model: MX45VAE
Okuma MX-45VAE CNC Milling Center New 1997 Specially built for extreme precision prototyping, with 12000 RPM spindle and glass scales
United States
1999 Okuma MX-45 VAE
- Manufacturer: Okuma
- Model: MX45VAE
- Spindle taper: CAT 40
CNC Vertical Machining Center Used Okuma MX-45 VAE (1999) CNC Vertical Machining Center for Sale. This pre-owned Okuma CNC vertical mill is located in The United States and available to be seen under power for a...
USA
1999 Okuma MX-45 VAE
- Manufacturer: Okuma
- Model: MX45VAE
- Spindle taper: CAT 40
CNC Vertical Machining Center Used Okuma MX-45 VAE (1999) CNC Vertical Machining Center for Sale. This pre-owned Okuma CNC vertical mill is located in The United States and available to be seen under power for a...
USA
Trusted Seller
1997 Okuma MX45VAE
- Manufacturer: Okuma
- Model: MX45VAE
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.* Features: Okuma OSP70...
Lake Elsinore, CA
Trusted Seller
1996 OKUMA MX-45 VAE #1300720
- Manufacturer: Okuma
- Model: MX45VAE
SPECIFICATIONS TABLE SIZE ---------- ( WORKING AREA ) -------- 20" X 40" TRAVEL -------------- ( X AXIS ) --------------------------- 30" TRAVEL -------------- ( Y AXIS ) ------------------------- 18.1" TRAVEL --...
Toledo, OH
Trusted Seller
1999 30" x 18" x 17" Okuma MX45VAE Vertical Machining Center ()
- Manufacturer: Okuma
- Model: MX45VAE
Imperial Metric Okuma Model MX45VAE 3-Axis CNC Vertical Machining Center Photo Link Specifications: Equipped with: Okuma OSP-U10M Control
Elk Grove Village, IL
Trusted Seller
2001 Okuma MX-45 VAE
- Manufacturer: Okuma
- Model: MX45VAE
- Spindle taper: BT 40
Accessories: 20-station tool changer New spindle and new spindle drive motor in 2019! Condition: very good
Celle, Germany
Trusted Seller
Okuma MX-45VAE
- Manufacturer: Okuma
- Model: MX45VAE
Cnc mark: Okuma | Cnc type: OSP700M | Construction year: 1996 | Table length: 1.000 mm | Table width: 460 mm | X: 760 mm | Y: 460 mm | Z: 450 mm | Spindle recording: ISO40 | Rpm minimum: 50 RPM | Maximum speed: ...
Etten-Leur, Netherlands
Trusted Seller
2001/3 OKUMA MX-45-VAE
- Manufacturer: Okuma
- Model: MX45VAE
- Power requirement: 28 kW
LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO Make OKUMA WITH A NEW SPINDEL I...
Slovenia
Trusted Seller
Make Offer
2001 Okuma MX-45VAE
- Manufacturer: Okuma
- Model: MX45VAE
Okuma MX-45VAE CNC Vertical Machining Center (2001) OSP-U100M controls Thru Spindle Coolant System Chip Auger, and Coolant Reclaim BT 40 Sublocation - Building 3 If exporting this lot, please note the Removal Ins...
The Tefen Tower, Israel
Visit Auction Website
2000 Okuma MX-45VAE
- Manufacturer: Okuma
- Model: MX45VAE
OSP-V10M BT40 ATC20 spindle speed 7000rpm If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan