Building Filters
1969 Okuma LS540
- Manufacturer: Okuma
- Model: LS540
Swing 540*center to center 1250 Swing on reciprocating table φ350 Scroll chuck φ270 2-axis digital 2000 Manufacturer OH
Okayama, Japan1970 Okuma LS450
- Manufacturer: Okuma
- Model: LS450
Swing 450*800 between centers Swing on reciprocating table φ250 Scroll chuck φ270, 1 fixed swing stop
Okayama, Japan2023 Okuma MB-46VA
- Manufacturer: Okuma
- Model: MB46
OSP-P300MA Table 460*760 XYZ: 560*460*460 BBT40 ATC20 Spindle rotation 8000rpm In-coil chip conveyor Tool breakage detection and automatic tool length compensation Automatic door Special kit specification (NML-E)...
Okayama, Japan1973 Okuma LS540X1250
- Manufacturer: Okuma
Swing 540*1250 between centers Swing on reciprocating table φ350 Indechuck φ300
Okayama, Japan1992 Okuma LR45x1700 1SC
- Manufacturer: Okuma
OSP-5020L Hollow chuck φ380 Swing φ700x1700mm X/Z: 380/1750mm 12 square turret Fixed swing stop Chip-con
Okayama, Japan1982 Okuma Ironworks MDB21x40
- Manufacturer: Okuma
2006 Retro & Modification (Okuma Eng.) NC:OSP-U100M Table 1500x4100mm, Gate width 2050mm, Loading 12TON Spindle NT50 (BT MAS2 pull head), spindle rotation 30-2000rpm, ATC24 (additional modification), spindle quil...
Okayama, Japan1968 Okuma Ironworks LDA1060x6000
- Manufacturer: Okuma
Bed swing up ø1060 x 6000 between centers Gap swing up ø1480 Reciprocating table swing up ø820 4-jaw indentation chuck ø920 Fixed swing x 2 Moving swing x 1 2-axis digital Main motor 22kW Weight supported between...
Okayama, Japan- Okayama, Japan
Okuma LK
- Manufacturer: Okuma
- Model: LK
Swing φ350 x 550mm between centers, swing on reciprocating table φ190mm, 3-jaw scroll φ165mm
Okayama, Japan1963 Okuma LS450
- Manufacturer: Okuma
- Model: LS450
Swing φ450*800 between centers Swing on reciprocating tableφ250 Scroll chuck φ190
Okayama, Japan1980 Teijin Okuma DMB
- Manufacturer: Okuma
- Model: DMB
Table 510*1280 Okb-q: B | Inventory location: Head Office (Okayama) | Stock location details: -- | Specification document: ---
Okayama, Japan2007 Okuma LAW-2S
- Manufacturer: Okuma
- Model: LAW-2S
OSP-P200L Finger Chuck (Kitagawa FG52M) XZ:Upper 380*865, Lower 250*898 Swing over bed φ790 Main spindle 3000rpm V6+V4 turret Chip con
Okayama, Japan
1990 Okuma LH55-N
- Manufacturer: Okuma
- Model: LH55N
OSP-5020L Indechuck φ1000 XZ: 675*2030 Swing on bed φ1100 Swing on reciprocating table φ685 Center-to-center 2000 H4 turret, spindle through-hole φ200
Okayama, Japan
1994 Okuma LB45IIC
- Manufacturer: Okuma
- Model: LB45
OSP7000 28-inch indexing chuck ST:X440/Z2060 Swing over bed φ900 Center to center 2060 Main spindle 2400rpm 12-corner turret, with centering, with stop, with chip conveyor, with 18-inch medium-size power chuck (K...
Okayama, Japan2005 Okuma LAW-2S
- Manufacturer: Okuma
- Model: LAW-2S
OSP-E100L Finger Chuck (Kitagawa FG52M) XZ:Upper 380*865, Lower 250*898 Swing over bed φ790 Main spindle 3000rpm V6+V4 turret Chip con
Okayama, Japan
