Building Filters

10

Used computing in Okayama, Japan

  • 1992 Okuma LR45x1700 1SC

    1992 Okuma LR45x1700 1SC

    • Manufacturer: オークマ

    OSP-5020L Hollow chuck φ380 Swing φ700x1700mm X/Z: 380/1750mm 12 square turret Fixed swing stop Chip-con

    Okayama, Japan
  • 1997 Okuma Toyokazu VTM-100

    1997 Okuma Toyokazu VTM-100

    • Manufacturer: 大隈豊和
    • Model: VTM100

    FANUC-18T With milling Table φ910mm, Swing φ1000mm, Max. machining height H550mm 2APC BT50 ATC36 Table rotation Max600rpm (2-step low speed specification) Milling spindle Max4500rpm

    Okayama, Japan
  • 1990 Okuma LH55-N

    1990 Okuma LH55-N

    • Manufacturer: オークマ
    • Model: LH55N

    OSP-5020L Indechuck φ1000 XZ: 675*2030 Swing on bed φ1100 Swing on reciprocating table φ685 Center-to-center 2000 H4 turret, spindle through-hole φ200

    Okayama, Japan
  • 1994 Okuma LB45IIC

    1994 Okuma LB45IIC

    • Manufacturer: オークマ
    • Model: LB45
    • Spindle bore: 52 mm

    OSP7000 28-inch indexing chuck ST:X440/Z2060 Swing over bed φ900 Center to center 2060 Main spindle 2400rpm 12-corner turret, with centering, with stop, with chip conveyor, with 18-inch medium-size power chuck (K...

    Okayama, Japan
  • 1983 Okuma LH35-N-1000

    1983 Okuma LH35-N-1000

    • Manufacturer: オークマ
    • Model: LH35N
    • Spindle bore: 52 mm

    OSP-U100L 610mm dia. Indechuck φ400 Tool post: H6 Spindle rotation 20-2200rpm Main spindle through-hole φ90 2004 O/H

    Okayama, Japan
  • 2005 Okuma LAW-2S

    2005 Okuma LAW-2S

    • Manufacturer: オークマ
    • Model: LAW-2S

    OSP-E100L Finger Chuck (Kitagawa FG52M) XZ:Upper 380*865, Lower 250*898 Swing over bed φ790 Main spindle 3000rpm V6+V4 turret Chip con

    Okayama, Japan
  • 2007 Okuma LAW-2S

    2007 Okuma LAW-2S

    • Manufacturer: オークマ
    • Model: LAW-2S

    OSP-P200L Finger Chuck (Kitagawa FG52M) XZ:Upper 380*865, Lower 250*898 Swing over bed φ790 Main spindle 3000rpm V6+V4 turret Chip con

    Okayama, Japan
  • 2007 Okuma 2SP-25H

    2007 Okuma 2SP-25H

    • Manufacturer: オークマ

    FANUC18i-TB Solid chuck φ200 XZ:175*200 Distance between both spindles 400 Max. machining diameter φ350 Max. machining length 200 Spindle 3200rpm 10 square + 10 square tool post Chip con

    Okayama, Japan
  • 2001 Okuma Toyokazu 2SP-25H

    2001 Okuma Toyokazu 2SP-25H

    • Manufacturer: 大隈豊和

    FANUC18i-TB Solid chuck φ200 XZ:175*200 Distance between both spindles 400 Max. machining diameter φ350 Max. machining length 200 Spindle 3200rpm 10 square + 10 square tool post Chip con

    Okayama, Japan
  • 2002 Okuma MD-55VA

    2002 Okuma MD-55VA

    • Manufacturer: Okuma

    OSP-E100M, table 1300*560, load capacity 700kg, XYZ:1050*560*450, HSK-A63 ATC32, 25,000rpm spindle, Super Hi-NC, NURBS command, spindle-through coolant (1.5MPa) and air, spindle oil mist system High-pressure oil ...

    Okayama, Japan