Building Filters

32

Used Okuma in Czech Republic

  • Trusted Seller
    2013 Okuma LB2000EXII MC

    2013 Okuma LB2000EXII MC

    • Manufacturer: Okuma
    • Model: LB2000

    This 3-axis Okuma LB2000EXII MC horizontal turning machine was manufactured in 2013. It features a chuck size of 6 inches, a maximum swing diameter of 580 mm, and a maximum machining diameter of 360 mm. The spind...

    Czechia
  • Trusted Seller
    2008 Okuma Corporation MB-46 VAE

    2008 Okuma Corporation MB-46 VAE

    • Manufacturer: Okuma
    • Model: MB46VAE
    • Spindle taper: BT 40

    The machine is in excellent technical condition. Control system okuma: OSP P200M | Clamping area of table: 1000x460 mm | Travel x-axis: 762 mm | Travel y-axis: 460 mm | Travel z-axis: 460 mm | Spindle speed: 0 - ...

    Brno, Czech Republic
  • Trusted Seller
    1995 Okuma Corporation LT 25-M

    1995 Okuma Corporation LT 25-M

    • Manufacturer: Okuma
    • Model: LT25 M

    The machine is in good condition. Control system okuma: OSP 7000L | Turn table diameter: 650 mm | Turning lenght: 1450 mm | Sloping bed: YES | Counterspindle: YES | Spindle bore: mm | Driven tools: YES | Number o...

    Brno, Czech Republic
  • Trusted Seller
    2012 Okuma Corporation MA 600

    2012 Okuma Corporation MA 600 H II

    • Manufacturer: Okuma
    • Model: MA-600HII

    The machine is in very good condition, after previous agreement the possibility of inspection. The machine will be available in May 2025.

    Brno, Czech Republic
  • Trusted Seller
    2003 OKUMA & HOWA HL-20

    2003 OKUMA & HOWA HL-20

    • Manufacturer: Okuma
    • Model: HL-20

    This OKUMA & HOWA HL-20 was manufactured in 2003. A robust horizontal turning machine featuring a maximum turning diameter of 350 mm and a work length of 460 mm. It boasts a spindle speed of up to 3,200 min-1 and...

    Czechia
  • Trusted Seller
    2014 Okuma Corporation GENOS L300M

    2014 Okuma Corporation GENOS L300M

    • Manufacturer: Okuma
    • Model: GENOS L300
    • Spindle bore: 68 mm

    The machine is in excellent condition. Control system okuma: OSP-P300LA-e | Turn table diameter: 300 mm | Turning lenght: 450 mm | Sloping bed: YES | Y axis: NO | Counterspindle: NO | Spindle bore: 68 mm | Millin...

    Brno, Czech Republic
  • Trusted Seller
    2017 Okuma Corporation LB 3000

    2017 Okuma Corporation LB 3000 EX II

    • Manufacturer: Okuma
    • Model: LB3000 EX II
    • Spindle bore: 105 mm

    Control system okuma: OSP-P300LA | Turn table diameter: 580 mm | Turning lenght: 950 mm | Sloping bed: YES | Y axis: NO | Counterspindle: NO | Spindle bore: 91 mm | Milling head: NO | Driven tools: YES | Number ...

    Brno, Czech Republic
  • Trusted Seller
    2013 Okuma Corporation LB 2000

    2013 Okuma Corporation LB 2000 EX II - MC

    • Manufacturer: Okuma
    • Model: LB2000 EX II
    • Spindle bore: 62 mm

    The machine is incl. bar feeder and pliers clamp. The machine is in good technical condition, under power.

    Brno, Czech Republic
  • Trusted Seller
    2018 Okuma Corporation LB 2000

    2018 Okuma Corporation LB 2000 EX II - MY C

    • Manufacturer: Okuma
    • Model: LB2000 EX II
    • Spindle bore: 62 mm

    The machine is in new technical condition, it has not even been put into operation. Accessories: tool probe, chuck, chip conveyor.

    Brno, Czech Republic
  • Trusted Seller
    2015 Okuma Corporation GENOS M560R-V

    2015 Okuma Corporation GENOS M560R-V

    • Manufacturer: Okuma
    • Model: Genos M560-V
    • Spindle taper: BT 40

    The machine is in very good condition, possible to retest.

    Brno, Czech Republic
  • Trusted Seller
    2008 OKUMA MA-400HA

    2008 OKUMA MA-400HA

    • Manufacturer: Okuma
    • Model: MA-400HA

    Length of the working table: 400 mm | Width of the working table: 400 mm | Maximum spindle speed: 8000 1/min | X-axis travels: 560 mm | Y-axis travels: 610 mm | Z-axis travels: 625 mm

    Brno, Czech Republic
  • Trusted Seller
    2001 OKUMA MA 50 HB

    2001 OKUMA MA 50 HB

    • Manufacturer: Okuma
    • Model: MA-50HB

    Equipment: Internal cooling Probe TS740-HSK63 HEIDENHAIN

    Brno, Czech Republic
  • Trusted Seller
    2021 OKUMA GENOS L3000-e

    2021 OKUMA GENOS L3000-e

    • Manufacturer: Okuma
    • Model: GENOS L3000

    Equipment: C-axis Y-axis CNC tailstock Tool probe Live Tools VDI holders Live Tool holders (5 psc)

    Brno, Czech Republic
  • Trusted Seller
    Okuma Genos L3000-e I CNC

    Okuma Genos L3000-e I CNC Lathe I 2021

    • Manufacturer: Okuma
    • Model: GENOS L3000

    Discover offering this pre-owned Okuma Genos L3000-e CNC Lathe, manufactured in 2021 and currently located in Czech Republic. This advanced CNC lathe offers exceptional precision and reliability for a wide range ...

    Czechia
  • OKUMA MX 45 VAE

    OKUMA MX 45 VAE

    • Manufacturer: Okuma
    • Model: MX45VAE

    Pallet dimensions: 1000x430 mm Travel X axis: 760 mm Travel Y axis: 460mm Travel Z axis: 450 mm Spindle clamping cone: ISO 40 Speed range: 7000 rpm Number of tools in the magazine: 20 : The machine is under power...

    Sedliště, Czech Republic
  • no-image_en.png

    Okuma MX45VAE Machining Center

    • Manufacturer: Okuma
    • Model: MX45VAE

    Good condition Okuma MX45VAE Machining Centers available between 1996 and 2009 years. Located in USA and other countries. Click request price for more information.

    USA
12