- Trusted Seller
2005 Okuma Okuma
- Manufacturer: Okuma
Equipped with: OSP E100L Chip Conveyor Tailstock 2x 24″ 4 Jaw Nobel Chucks Steady Rest
- Trusted Seller
1997 Used OKUMA LU15M CNC LATHE | Lathes CNC
- Manufacturer: Okuma
- Model: LU15
Imperial Metric Okuma Model LU-15M Twin Turret Live Milling CNC Lathe SWING OVER BED 20.87" SWING OVER CARRIAGE 14.96" SWING OVER CROSS SLIDE 12.99" MAXIMUM TURNING DIAMETER 10.62" MAXIMUM TURNING LENGTH 23.62" T...
Elk Grove Village, IL - Trusted Seller
1980 8" chuck Okuma LC-20 1-ST CNC Chucking Lathe
- Manufacturer: Okuma
- Model: LC20
- Spindle bore: 50.8 mm
Imperial Metric Okuma LC-20 1-ST CNC Chucking Lathe Equipped with: OSP-3000 CNC
Elk Grove Village, IL - Trusted Seller
2007 Okuma Captain L470M Live Tool CNC Lathe (2006)
- Manufacturer: Okuma
- Model: Captain L470
- Spindle bore: 52 mm
Imperial Metric Okuma Model Captain L-470M Live Tool CNC Lathe (2006) Swing Over Bed 24.4" Swing Over Cross Slide 18.89" Max Cutting Diameter 16.53" Max Cutting Length 49.21" X-Axis Travel 11.81" Z-Axis Travel 50...
Elk Grove Village, IL - Trusted Seller
2002 Okuma LU-15
- Manufacturer: Okuma
- Model: LU15
Equipped With Chip Conveyor Tailstock Machine type: CNC Lathes | Machine location: Texas | Stock #: 233021 | Swing over bed: 20.87″ | Swing over carriage: 14.96″ | Maximum turning diameter: 14.17″ | Maximum turni...
- Trusted Seller
2005 Okuma LT-200 MY
- Manufacturer: Okuma
- Model: LT200 MY
- Spindle bore: 52 mm
Capacity – Main Spindle Sub Spindle Turrets: Number ofPositions (turret one / turret two) All Live: 12 / 12 Tools Each Equipped With: ATS Collet Chuck on Main & Sub Standard Tool Holders Auto Touchsetter Barfeed ...
- Trusted Seller
2007 Okuma ES-L6II 2-Axis CNC Lathe (2006)
- Manufacturer: Okuma
- Model: ES-L6 II
- Spindle bore: 70 mm
Imperial Metric
Elk Grove Village, IL - Trusted Seller
2015 Okuma LB3000-EXII
- Manufacturer: Okuma
- Model: LB3000 EX II
- Spindle bore: 105 mm
Equipped With: Okuma OSP-P300L Control Chip Conveyor **Have Inspection Report from Gosiger** The machine is in bad condition The machine would not power on due to 24 volt short, breaker would trip during reset Wa...
- Trusted Seller
2013 Okuma LU35-M
- Manufacturer: Okuma
- Model: LU35
- Spindle bore: 51 mm
Options Included – Live tool A2-11 Spindle Nose Auto Moon Roof Touchsetters Transformers New Replacement Cost $600,000++ With 8-12 Month Lead Time Service Reports Available Upon Request
- Trusted Seller
1995 Okuma LU-45
- Manufacturer: Okuma
- Model: LU45
- Spindle bore: 52 mm
MACHINE EQUIPPED WITH Tool Holders Used 1995 Okuma LU-45. Machine Tool Bids offers plenty of CNC Lathes and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Oku...
Chicago, IL - Trusted Seller
2006 Okuma L370MW
- Manufacturer: Okuma
- Model: L370MW
10″ Chuck on Main Spindle Equipped With: 12 Station Tool Sub Spindle w/ 8″ Chuck Live Tooling (2 for X, 2 for Z) Bar Feeder Additional Tooling (5c Collets)
- Trusted Seller
2015 Okuma LU4000 EX
- Manufacturer: Okuma
- Model: LU4000 EX
Missing Controller Equipped With: Chip Conveyor **Have Inspection Report from Gosiger** Machine is unable to be powered on due to, The machine is missing the front control panel, computer hard drive and hardware....
- Trusted Seller
2013 Okuma LU35-M
- Manufacturer: Okuma
- Model: LU35
- Spindle bore: 51 mm
Options Included – Live tool Robot interface A2-11 Spindle Nose Auto Moon Roof Touchsetters Transformers New Replacement Cost $600,000++ With 8-12 Month Lead Time Service Reports Available Upon Request
- Trusted Seller
2008 Okuma Mac Turn 550W
- Manufacturer: Okuma
Equipped With: Okuma OSP-P200L Control Full Contouring B-Axis Universal Head 15″ Chuck Available Manuals Magnetic Chip Conveyor Multiple sets of misc Jaws Misc sets of different size collets Tool Holders with Too...
- Trusted Seller
2022 Okuma LB3000
- Manufacturer: Okuma
- Model: LB3000
- Spindle bore: 65 mm
22.83″ Swing ø 13.39″ max turn dia. 30 HP (22kw) main spindle 5,000 rpm A2-6 spindle nose 3.15″ through spindle (80mm) 12 position, 0.1 sec, NC Multitasking tool turret 1,181 IPM / 984 IPM / 492 IPM; Z/X/Y rapid ...
Okuma V100R CNC Lathe
- Manufacturer: Okuma
- Model: V100R
Good condition Okuma V100R CNC Lathes available between 2007 and 2015 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
