Used dcs

Trusted Seller
STERLING 4.5 " EXTRUDER 32.1 VENTED BARREL 200HP DC
- used
- Manufacturer: Sterling
- Model: 45
108976 One (1) used Sterling 4.5" extruder, 32.1 vented barrel, (8) heater zones, screw and barrel in good condition , Nordson EH 45 screen changer, 200HP DC motor with gear box, Drive cabinet with cooler. ( no P...
Greenville, SC
Trusted Seller
BEKUM Extruder Plastic Machine - Motor DC Powertech Brushless 15 HP DC
- used
- Manufacturer: BEKUM
“Call for photos and specs number: 786/277/7843. Large inventory of compressors, dryers, chillers, filters, conveyors and forklifts.” MD MACHINERY CENTER HIGH QUALITY, GOOD PRICING, FAST SHIPPING! QUESTIONS CAN B...
$3,105 USD
Miami, FL
Trusted Seller
RDN EMC3DC
- used
- Manufacturer: RDN
Used RDN Fly Knife Cutter for Maximum 3" Diameter Product Model EMC3DC Serial #33183 New 7/1994 Includes operator controls Click on the link below to see a video of the machine running.
Hainesport, NJ
Trusted Seller
2.5" Davis Standard Thermatic, Single Screw Extruder, Model 25IN25, 25:1 L/D, 40 HP DC Motor
- used
- Manufacturer: Davis-Standard
- Model: Thermatic
Air Cooled, 4 Barrel Zones 3.5" x 3.5" Feed Throat 40 HP Reliance Electric Type B2810A1Z DC Motor With 1/2 HP Blower Shunt Wound Inline Gear Reducer, Ratio 17.26:1, Extruder RPM: 100 Hes 301 System, Dynisco UPR80...
United States
Trusted Seller
1990 Davis Standard 60IN 60 TPIH
- used
- Manufacturer: Davis-Standard
30:1 L/D Two-Stage Feed Screw: Replaced in 2012 ($21,000.00) 40’ Long Water Trough Multispeed Belt Puller 6”X36” (2 New Belts $721.00 ea.) Hd Pneumatic Cutter (Guillotine Type) 25hp Double Feed Shredder-Granulato...
$74,900 USD
Get financing
Est. $1,410/mo
Chicago, IL
Trusted Seller
Davis Standard 6" Single Screw Extruder System
- used
- Manufacturer: Davis-Standard
6" Davis Standard Single Screw Extruder • 400 HP DC motor and Drive • Set up for water cooling, some heater bands have been replace with ceramic heaters non water cooling. • 8 zones barrel zones 5 die zones ...
$193,775 USD
Get financing
Est. $3,647/mo
Ohio, USA
Gloucester 120/150
- used
- Manufacturer: Gloucester
Conair (6) material tru blend loader blender feed hopper 4.5" Extrek hydraulic screen changer with hydraulic power pack, 14" diameter x 48" long cooling mandrel, Gloucester dual pull roll stand, 52" wide pull rol...
Valley Cottage, NY
Trusted Seller
6.5" Davis Standard Single Screw Extruder, Model 165MM60TPIH, 42:1 L/D Vented Barrel, 500hp
- used
- Manufacturer: Davis-Standard
- Model: 165MM60TPIH
Used 6.5" Davis Standard Single Screw Extruder, Model 165MM60TPIH Temperature Control Panel with 9 Red Lion Temp Controllers, 645HP Gearbox Capacity with 1.5 Service Factor, 13.4 Gearbox Ratio New in 1989
United States
Trusted Seller
6" Gloucester Extrusion Line With Nordson WRP12V Water Ring Pelletizer
- used
- Manufacturer: Nordson
6" Gloucester Extrusion Line With Nordson WRP12V Water Ring Pelletizer DC Drive 18" L x 7" W Tangential Feed Throat, Model 266-001 New In 1990 460/3/60 Screw Has Been Rebuilt And Unused Since Rebuild Parkinson Co...
United States
Trusted Seller
12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio
- used
- Manufacturer: Crown
30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 V...
United States
Trusted Seller
12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio
- used
- Manufacturer: Crown
30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 V...
United States
Trusted Seller
3.5" Davis Standard Extruder, 24:1 L/D, Water Cooled, 75HP
- used
- Manufacturer: Davis-Standard
42" Centerline Height, Comes With Barrel Clamp and 2 Screws, Has 10 Hp Crammer Feeder, Variable Speed Drive, Auxiliary Pump With Feeder, 250 Amp Disconnect Main Motor (125 Amps) Serial #F8612 MACHINE SOLD AS IS
United States
Davis Standard Pedestal
- used
- Manufacturer: Davis-Standard
Extruder Used Davis Standard Pedestal Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any qu...
USA
Davis Standard Single Screw Extruder
- used
- Manufacturer: Davis-Standard
Single Screw Extruder Used Davis Standard Single Screw Extruder for Sale. This pre-owned Davis Standard Single plastic extruder is located in The United States and available to be seen under power for an inspect...
USA
Hobbs William Single Screw
- used
- Manufacturer: Hobbs William
Single Screw Extruder Used Hobbs William Single Screw Extruder for Sale. This pre-owned William Single Screw plastic extruder is located in The United States and available to be seen under power for an inspectio...
USA