Processing » Extruders

Search By Manufacturer

Search By Country

Building Filters

Related Events

Live Now

Dorel Home Complete Plant Auction

by Machinery Max

Online
Ends Sep 26th, 15:00 CDT
View event
408

Used dcs

  • 1998 Milacron Apex 6.0 Extruder

    1998 Milacron Apex 6.0 Extruder

    • used

    • Manufacturer: Milacron

    65" X 24" Cinn/HPM w/6" Ext. 65" X 24" No wind or shear 1998 Used 65" wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr. Includes the following:6" HPM extruder 30...

    Valley Cottage, NY
  • 1988 Welex 41''

    1988 Welex 41''

    • used

    • Manufacturer: Welex

    Used Welex 41" sheet extrusion line: - 3.5" 30/1/ L/D Welex extruder. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extrud...

    Valley Cottage, NY
  • 1998 Milacron Apex 6.0 Extruder

    1998 Milacron Apex 6.0 Extruder

    • used

    • Manufacturer: Milacron

    65" X 24" Cinn/HPM w/6" Ext. 65" X 24" No wind or shear 1998 Used 65" wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr. Includes the following: 6" HPM extruder 3...

    Valley Cottage, NY
  • Trusted Seller
    60MM Leistritz ZSE 60 GL-36D

    60MM Leistritz ZSE 60 GL-36D Twin Screw Extruder, 36:1 L/D, 121KW

    • used

    • Manufacturer: Leistritz

    Used 60MM Leistritz ZSE 60 GL-36D Twin Screw Extruder, 121KW(162 HP) Co-Rotating Vent In Zone 4, Side Feeder In Zone 5 10 Zone Control Panel With Eurotherm 2208 Temperature Controllers 121KW(162) HP Baumuller Shu...

    United States
  • 1988 Welex 41''

    1988 Welex 41''

    • used

    • Manufacturer: Welex

    Used Welex 41" sheet extrusion line:- 3.5" 30/1/ L/D Welex extruder. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extrude...

    Valley Cottage, NY
  • Trusted Seller
    2.5" EDS/Akron Extruder, 38:1 L/D

    2.5" EDS/Akron Extruder, 38:1 L/D Ratio, 75 HP, Vented Barrel

    • used

    • Manufacturer: Akron

    Used 2.5" EDS/Akron Extruder 75 HP Baldor DC Motor With Reliance VS DC Drive 6 Barrel Zones, 6 Downstream Zones, Omron E5EN Controllers Air-Cooled Barrel, Vent Located Approx. 62" From Center Of Feed Throat 42"" ...

    United States
  • Trusted Seller
    Merritt Davis A/C Vanguard 3in

    Merritt Davis A/C Vanguard 3in Plastic Extruder

    • used

    • Manufacturer: Merritt Davis

    With Loader and Feeder Voltage: 500 Volt | Screw size: 3in | L/d ratio: 24:1 | Cooling: Air Cooled | Die: Cross-Head Die | Barrel zones: 3 | Drive: 60HP DC Electric Motor | Current: 102 Amps | Gearbox ratio: 14:1

    Western Canada
  • Trusted Seller
    6" PTI Extruder - For

    6" PTI Extruder - For Rebuild, Needs New Barrel

    • used

    • Manufacturer: PTI

    Used 6" PTI Extruder - For Rebuild, Needs New Barrel Lufkin Change Gear Gearbox 400 HP GE DC Motor Includes Control Panel DOES NOT HAVE FEED THROAT, SCREW, OR BARREL Sold as incomplete machine. Sold AS-IS.

    United States
  • Trusted Seller
    4" x 34.5" Youngstown Puller,

    4" x 34.5" Youngstown Puller, Model MT30-13393

    • used

    • Manufacturer: Youngstown

    Used 4" x 36" Youngstown Puller Model MT30-13393 1 Hp DC Motor Screw Jack Raise and Lower, Feet Per Minute Readout, Speed Pot Has 460 Volt Plug New In 1993

    United States
  • BAKER PERKINS MPC/V-50 107120

    BAKER PERKINS MPC/V-50 107120

    • used

    • Manufacturer: Baker Perkins

    BAKER PERKINS MODEL MPC/V-50 DIRECT EXTRUSION LINE BUILT IN 1984 INCLUDING: 75MM SINGLE SCREW EXTRUDER WITH A 36" ELECTRICAL HEATED, WATER COOLED BARREL WITH A 12 TO 1 L/D RATIO, 15 HP, 1750 RPM AC DRIVE MOTOR. 3...

    Cleveland, TX
  • 2.5″ Sterling 30:1 Extruder –

    2.5″ Sterling 30:1 Extruder – New 1995

    • used

    • Manufacturer: Sterling

    2.5″ Sterling 30:1 Extruder Electrically heated, air cooled, 5 Barrel zones, 50 HP DC motor with SCR, with Una-Dyn hot system Model 200

    Rockville Centre, NY
  • Trusted Seller
    4.5" PTI Water Ring Pelletizing

    4.5" PTI Water Ring Pelletizing Line, Vented Barrel

    • used

    • Manufacturer: PTI

    Used 4.5" PTI Water Ring Pelletizing Line Consisting Of The Following Pieces: 250 HP Baldor DC Motor With Reliance Flexpak 3000 DC Drive Vented Barrel, Vent Located Approximately 94" From Center Of Feed Throat Wa...

    United States
  • Trusted Seller
    4.5" PTI Strand Pelletizing Line,

    4.5" PTI Strand Pelletizing Line, Vented Barrel

    • used

    • Manufacturer: PTI

    Used 4.5" PTI Strand Pelletizing Line 125 RPM Screw Speed, Vented Barrel, Air Cooled 200 HP Emerson DC Motor and Emerson Quantum II DC Drive PTI Control Panel with 6 Barrel Zones, 3 Screen Changer Zones, and 3 Di...

    United States
  • Trusted Seller
    3.5" Egan Powerflight Extruder, 24/1

    3.5" Egan Powerflight Extruder, 24/1 L/D Ratio, 75hp

    • used

    • Manufacturer: Egan

    Used 3.5" Egan Powerflight Extruder, 24/1 L/D Ratio, 75hp DC Motor, 1750 RPM, With Saftronics Drive, Belt Driven, 4 Zones Water Cooled Barrel, 6 Barber Colman AT580 Temperature Controls, Mercury Relays, Rpm and A...

    United States
  • Trusted Seller
    6" Egan / Davis Extruder,

    6" Egan / Davis Extruder, 34:1 L/D, 400 HP, Vented Barrel

    • used

    • Manufacturer: Egan

    6” Egan / Davis Standard Extruder, Double Vented, One Vent Is Plugged 8 Barrel Zones, 5 Die Zones Set Up For Water Cooling, Some Bands Replaced With Ceramic Spare Screw(Unused), Spare DC Drive 11:48:1 Gearbox Rat...

    United States
1011121314