Used dcs

Wayne Strand Pelletizing Downstream Equipment
- used
- Manufacturer: Wayne
- 30" L x 16" W x 24" Deep Strand Cooling Tank, Integrated Compressed Air Powered Air-Knife S/N 8142 - 2" Wide Pelletizer, 1.5HP DC Motor, 230/1/60 - 24" Diameter Sweco Classifier, 2 Decks, 1/4 HP, 230/1/60 - Pre...
Gibsonville, NC
Extruders 80464
- used
- Electrically heated, air cooled, vented & plugged barrel - 42.5" Centerline - Free standing 8 Zone Control Panel - Reliance VS DC Drive Unit - 75 HP DC Motor into belt driven gearbox Photos available.
Troy, MI
Extruders 80467
- used
- 100 HP, 500 V DC motor into belt driven gearbox - Gearbox ratio: 11.48:1 - Electrically heated, water cooled, vented and plugged barrel - 65" Centerline - Gearbox rated for 265 HP @ 1750 RPM - Beringer 3.5" Sc...
Troy, MI
Extruders 80466
- used
- Water cooled, 7 Zone vented & plugged barrel - Approx. 100-150 HP DC Motor - Belt driven 15.12:1 Gearbox with a 1.25 service factor and a max. 150 HP motor rating - Beringer Hydraulic Screen Changer-no power pa...
Troy, MI
1987 Extruders 80465
- used
- 7 Zone Electrically heated, water cooled (closed loop) and side vented barrel - 52" Centerline height - Gearbox ratio; 5.67:1 rated at 158 HP at a service factor of 1.25. - Gearbox belt driven by a 200 HP, 500...
Troy, MI
1992 Battenfeld Uni-Ex-1-90-30B
- used
- Manufacturer: Battenfeld
- Model: Uni-Ex
Single Screw Extruder Inlet zone: grooved bush | Screw diameter: 90 mm | Screw length: 30 x D mm | Screw speed: max. 164 1/min. | Screw torque: 2 x 1580 Nm | Drive motor: DC-motor, 165 kW | Extruder control: Batt...
Bocholt, Germany
1995 Blake 303-1600-180
- used
- Manufacturer: Blake
Caterpillar haul-off New speed control incl. 10 m cable installed in 2025
$11,109 USD
Get financing
Est. $218/mo
Bocholt, Germany
1994 Reifenhäuser BT-1000-2-63 K
- used
- Manufacturer: Reifenhäuser
Twin Screw Extruder Temperature control: : digital controllers (2 x PSHG Multpact 88)
$20,931 USD
Get financing
Est. $394/mo
Bocholt, Germany
1995 BATTENFELD BEX 2-90-22V/3
- used
- Manufacturer: Battenfeld
30906 operation hours Use area: Screws ø 90-22D, approx. 400 kg/h | Order: D.C. motor
Neuenburg am Rhein, Germany
1977 KUHNE K 70-20D
- used
- Manufacturer: Kuhne
Use area: Screw ø 72-20D, approx. 40 kg/h | Order: D.C. motor
Neuenburg am Rhein, Germany
1995 IND. GENERALI 80-30D
- used
- Manufacturer: IND. GENERALI
Incl. Integrated Co-Extruder Use area: Screw ø 80-30D, approx. 350 kg/h | Order: D.C. motor 116 kW
Neuenburg am Rhein, Germany
1997 BANDERA 75-33D
- used
- Manufacturer: Luigi Bandera
Brand New Screw, Fully Refurbished Extruder, New Electrics, Excellent Condition
Neuenburg am Rhein, Germany
1987 REIFENHÄUSER RH 551-1-70-25
- used
- Manufacturer: Reifenhäuser
New Electrics, new touch panel Use area: Screw ø 70-25D, approx. 100 kg/h | Order: 45.5 kW D.C. motor
Neuenburg am Rhein, Germany
1987 BANDERA 65-30D
- used
- Manufacturer: Luigi Bandera
New screw, new controller Use area: Screw ø 65-30D, approx. 200 kg/h | Order: D.C. motor 81.9 kW
Neuenburg am Rhein, Germany
Granulating line
- used
- Manufacturer: Plast Machines, BKG Nordson, Resotec
No. 2587k 1 used pelletizing line, function tested, throughput up to approx. 500 kg/h depending on material, consisting of: 1 volumetric feeder extruder Plastmachines type PME 100 single screw Ø 100 mm - 35 L/D d...
Wuppertal, Germany