Used dcs

Trusted Seller
2000 Werner & Pfleiderer ZSK 50 MCC (40D) - 181KW DC - Double screw extruder
- used
- Manufacturer: WP
General SKU 231U195 Location Barneveld Make Werner & Pfleiderer Type ZSK 50 MCC . 64012350 Sizes Screw diameter 40 mm Main Features Motor 181 KW Inlet diameter 165 mm L/D 54 Specified Features - Double screw ext...
Barneveld, Netherlands
WAYNE 1.250″ 30:1 L/D EXTRUDER 16355
- used
- Manufacturer: Wayne
Wayne 1.25″ extruder, S/N 9414-832. 30:1 L/D electrically heated, air cooled, vented (venting is plugged), barrel driven by a 7.5HP DC motor with SCR control 230-Volts input power. Includes track wheel base and a...
Elk Grove Village, IL
JOHNSON 1.5″ 8786
- used
- Manufacturer: Johnson
Johnson 1-1/2″ extruder 24:1 L/D, non-vented barrel mounted on base for co-extrusion. 10HP DC motor with no controls. 11.32:1 gear box rating at 41HP with a 1.25 service factor. No barrel cooling. S/N 7621-15
Elk Grove Village, IL
JOHNSON 1.5 8891
- used
- Manufacturer: Johnson
Johnson 1-1/2″ extruder, 24:1 L/D. Non-vented barrel mounted on a base for co-extrusion. 10HP DC motor with no controls. S/N 7619-15. 11.32:1 gear box, 41 HP with a 1.25 service factor. No barrel cooling.
Elk Grove Village, IL
Trusted Seller
10" Stewart Bolling / Berringer Water Ring Pelletizing Line
- used
- Manufacturer: Stewart Bolling
10" Stewart Bolling / Berringer Water Ring Pelletizing Line Used 10" Stewart Bolling / Berringer water ring pelletizing line consisting of: 10" Stuart Bolling single screw extruder, 10:1 l/d, electrically heated,...
Cleveland, OH
Trusted Seller
6" Davis Standard Egan / Berringer Water Ring Pelletizing Line
- used
- Manufacturer: Davis-Standard
6" Davis Standard Egan / Berringer Water Ring Pelletizing Line Used 6" Davis standard Egan / Berringer water ring pelletizing line consisting of: 6" Davis Standard Egan extruder, model 6026-D.R.H, 44:1 l/d, elect...
Cleveland, OH
Trusted Seller
Gloucester 60mm
- used
- Manufacturer: Gloucester
Used 2.36” (60mm) Gloucester 32/1 L/D vented single screw Extruder. Year 1986. Driven by a 50 hp DC motor and SCR control. Gearbox 9.48:1 ratio, serial 140. Barrel has 45” centerline height. Includes temperature ...
Hainesport, NJ
HOMEMADE CRAMMER FEEDER 11024
- used
Homemade crammer feeder belt driven auger by a 5HP 180-Volt 1,750 RPM DC motor through a gearbox approximately 30″ diameter hopper with 40″ long cone. 25:1 gearbox ratio for 4.5″ extruder heavy duty auger protrud...
Elk Grove Village, IL
Trusted Seller
Auction
Berstorff 96mm Co-Rotating Twin Screw Extruder, Model ZE90HT, Service# 80004925. Intermeshing screws
- used
Berstorff 96mm Co-Rotating Twin Screw Extruder, Model ZE90HT, Service# 80004925. Intermeshing screws, approximate 33 to 1 L/D ratio, approximate maximum rpm 345. 500hp DC motor, approximate gearbox ratio 1 to 5, ...
Evansville, IN
Visit Auction Website
CINCINNATI MILICRON (WELEX) 2 ROLL 6547
- used
- Manufacturer: Cincinnati
Cincinatti Milicron 2 roll stack / laminator, no S/N. Two (2) chrome rolls 17.75″ diameter 34″ wide cored for cooling. Two (2) aluminum guide rolls. One (1) is 17.75″ diameter x 31″ wide, and one (1) is 8″ diamet...
Elk Grove Village, IL
Trusted Seller
Auction
Berstorff 96mm Co-Rotating Twin Screw Extruder, Model ZE90HT(RD), Service# 80003626, Intermeshing sc
- used
Berstorff 96mm Co-Rotating Twin Screw Extruder, Model ZE90HT(RD), Service# 80003626, Intermeshing screws, approximate 33 to 1 L/D ratio, approximate maximum rpm 345. 500hp DC motor, approximate gearbox ratio 1 to...
Evansville, IN
Visit Auction Website
Trusted Seller
Betol 4024 Extruder - IPP# 104127
- new
- Manufacturer: Betol
extrusion/film line (4) 12 KW for barrel w/screw speed indicator and ammeter Electrical supply 3 phase, 50 cycle, 380/440 volt Screw and barrel made of high grade corrosion resistant steel alloy (1) Betol Mdl 025...
Princeton Junction, NJ
DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869
- used
- Manufacturer: Davis-Standard
Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...
Elk Grove Village, IL
Trusted Seller
DAVIS STANDARD 1.5"
- used
- Manufacturer: Davis-Standard
- Model: 15
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder. New in 1989. Equipped with 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor dr...
Hainesport, NJ
Trusted Seller
Extruder 44.5 mm (1.75 in) - IPP# 85782
- used
- Manufacturer: Welex
1.75" x 36" 1 1/2" inlet water cooled 2-zone steam heated Drive 20 HP, DC volt, 500 volt arm. 300 volt field motor, max 1750 rpm thru Lufkin gear reducer, 9.91:1 ratio, 175 rpm output speed. Mtd in frame 5' wide ...
Princeton Junction, NJ