Used dcs

Trusted Seller
DAVIS STANDARD 4.5"
- used
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ
WAYNE MFG 3/4″ EXTRUDER 17885
- used
- Manufacturer: Wayne
One used 3/4″ 20:1 L/D Wayne laboratory extruder having a two (2) zone electrically heated, air cooled barrel. Gearbox is belt driven by a 2 HP DC Motor with controls. Unitized temperature control panel with thre...
Elk Grove Village, IL
NRM / DAVIS STANDARD 1.5″ 16125
- used
- Manufacturer: Davis-Standard
NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...
Elk Grove Village, IL
Trusted Seller
1991 DAVIS STANDARD 4.5"
- used
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M-3315, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-1...
Hainesport, NJ
Trusted Seller
Extruder 69.9 mm (2.8 in) Stainless Steel 316 - IPP# 703669
- used
- Manufacturer: Reifenhausser Kg
single screw extruder line General purpose screw and feed hopper. Production rate: 75 Kg/hr maximum polypropylene. Barrel has (8) heaters with (3) electric fans Extruder driven by a 60 HP (46 KW) DC motor. Line i...
Princeton Junction, NJ
Trusted Seller
Auction
Coperion 92mm Super Plus-Compounder Co-Rotating Twin Screw Extruder, Upgraded in 2017 to Type ZSK-92
- used
- Manufacturer: Coperion Waeschle
Coperion 92mm Super Plus-Compounder Co-Rotating Twin Screw Extruder, Upgraded in 2017 to Type ZSK-92 MC Gearbox, Model 76F 6000, Project# 16-6807. Intermeshing screws, approximate 38 to 1 L/D ratio, approximate m...
Evansville, IN
Visit Auction Website
2″ PRODEX 24:1 EXTRUDER 16902
- used
Prodex 2″ 24:1 L/D extruder. Unit has an electrically heated air cooled non-vented barrel at approximately a 48″ center-line height. Gearbox is a link-belt model EX-1028-59 has a reduction ratio of 11.36:1 and is...
Elk Grove Village, IL
NRM/DAVIS STANDARD 3.5PMIV RH/WC VTD/PLGO 12733
- used
- Manufacturer: Davis-Standard
NRM / Davis Standard model 3.5PMIV RH/WC VTD/PLGO, 3.5″ extruder, S/N 19222. 24:1 L/D water cooled 7 zone vented and plugged barrel. Approximately 100-150HP DC motor into a belt driven 15.12:1 gearbox with a 1.25...
Elk Grove Village, IL
2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned
- used
2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned 42″ Centerline – 36:1 L/D Ratio – 6″ x 3.5″ feed throat, Belt Driven through a 13.95:1 Koellman PEZS 360/3.5 Gearbox, Rated to 125 HP, 75 HP Baldor DC Motor with R...
Rockville Centre, NY
Trusted Seller
1994 LEISTRITZ MICRO 18
- used
- Manufacturer: Leistritz
Used 18mm approximately 28/1 L/D Leistritz Micro-18 Co-Rotating Twin Screw Extruder, serial #473614, new 1994. 500 RPM screw speed. 6 Barrel Segments, Top Ports In Segments 1, 2, and 6. 6 Barrel Zones Controlled ...
Hainesport, NJ
Trusted Seller
2002 COPERION 2.3"
- used
- Manufacturer: Coperion Waeschle
Used 58mm Coperion Co rotating Mega Compounder with 11 barrel sections (34/1 L/D) and side feeder, New 3/2002. Has electrically heated water cooled barrel. Direct connected to 500 hp DC motor with SCR controller....
Hainesport, NJ
HARTIG 2.5″ 24:1 L/D 50 18342
- used
One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...
Elk Grove Village, IL
Trusted Seller
BUSS 200 HP
- used
- Manufacturer: Buss
Used 100mm Buss kneader with 9/1 L/D barrel. Driven by 200 hp DC motor, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approxi...
Hainesport, NJ
Trusted Seller
MARSHALL & WILLIAMS 54" Wide
- used
- Manufacturer: Marshall
Used Marshall and Williams sheet take-off unit consisting of (3) 54" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter and are ceramic coated. Top and...
Hainesport, NJ
Gloucester 120/150
- used
- Manufacturer: Gloucester
120 MM Gloucester extruder, 32:1 L/D, electrically heated, water cooled, jacketed feed section with 150 HP DC motor with SCR controller 150 MM Glcoucester extruder, 30:1 L/D, electrically heated, water cooled, ja...
Valley Cottage, NY