- Trusted Seller
STERLING 4.5 " EXTRUDER 32.1 VENTED BARREL 200HP DC
used
- Manufacturer: Sterling
- Model: 45
108976 One (1) used Sterling 4.5" extruder, 32.1 vented barrel, (8) heater zones, screw and barrel in good condition , Nordson EH 45 screen changer, 200HP DC motor with gear box, Drive cabinet with cooler. ( no P...
Greenville, SC - Trusted Seller
BEKUM Extruder Plastic Machine - Motor DC Powertech Brushless 15 HP DC
used
- Manufacturer: BEKUM
“Call for photos and specs number: 786/277/7843. Large inventory of compressors, dryers, chillers, filters, conveyors and forklifts.” MD MACHINERY CENTER HIGH QUALITY, GOOD PRICING, FAST SHIPPING! QUESTIONS CAN B...
$3,105 USDMiami, FL - Trusted Seller
RDN EMC3DC
used
- Manufacturer: RDN
Used RDN Fly Knife Cutter for Maximum 3" Diameter Product Model EMC3DC Serial #33183 New 7/1994 Includes operator controls Click on the link below to see a video of the machine running.
Hainesport, NJ - Trusted Seller
2.5" Davis Standard Thermatic, Single Screw Extruder, Model 25IN25, 25:1 L/D, 40 HP DC Motor
used
- Manufacturer: Davis-Standard
- Model: Thermatic
Air Cooled, 4 Barrel Zones 3.5" x 3.5" Feed Throat 40 HP Reliance Electric Type B2810A1Z DC Motor With 1/2 HP Blower Shunt Wound Inline Gear Reducer, Ratio 17.26:1, Extruder RPM: 100 Hes 301 System, Dynisco UPR80...
United States - Trusted Seller
1990 Davis Standard 60IN 60 TPIH
used
- Manufacturer: Davis-Standard
30:1 L/D Two-Stage Feed Screw: Replaced in 2012 ($21,000.00) 40’ Long Water Trough Multispeed Belt Puller 6”X36” (2 New Belts $721.00 ea.) Hd Pneumatic Cutter (Guillotine Type) 25hp Double Feed Shredder-Granulato...
- Trusted Seller
Davis Standard 6" Single Screw Extruder System
used
- Manufacturer: Davis-Standard
6" Davis Standard Single Screw Extruder • 400 HP DC motor and Drive • Set up for water cooling, some heater bands have been replace with ceramic heaters non water cooling. • 8 zones barrel zones 5 die zones ...
Gloucester 120/150
used
- Manufacturer: Gloucester
Conair (6) material tru blend loader blender feed hopper 4.5" Extrek hydraulic screen changer with hydraulic power pack, 14" diameter x 48" long cooling mandrel, Gloucester dual pull roll stand, 52" wide pull rol...
Valley Cottage, NY- Trusted Seller
6.5" Davis Standard Single Screw Extruder, Model 165MM60TPIH, 42:1 L/D Vented Barrel, 500hp
used
- Manufacturer: Davis-Standard
- Model: 165MM60TPIH
Used 6.5" Davis Standard Single Screw Extruder, Model 165MM60TPIH Temperature Control Panel with 9 Red Lion Temp Controllers, 645HP Gearbox Capacity with 1.5 Service Factor, 13.4 Gearbox Ratio New in 1989
United States - Trusted Seller
6" Gloucester Extrusion Line With Nordson WRP12V Water Ring Pelletizer
used
- Manufacturer: Nordson
6" Gloucester Extrusion Line With Nordson WRP12V Water Ring Pelletizer DC Drive 18" L x 7" W Tangential Feed Throat, Model 266-001 New In 1990 460/3/60 Screw Has Been Rebuilt And Unused Since Rebuild Parkinson Co...
United States - Trusted Seller
12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio
used
- Manufacturer: Crown
30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 V...
United States - Trusted Seller
12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio
used
- Manufacturer: Crown
30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 V...
United States - Trusted Seller
3.5" Davis Standard Extruder, 24:1 L/D, Water Cooled, 75HP
used
- Manufacturer: Davis-Standard
42" Centerline Height, Comes With Barrel Clamp and 2 Screws, Has 10 Hp Crammer Feeder, Variable Speed Drive, Auxiliary Pump With Feeder, 250 Amp Disconnect Main Motor (125 Amps) Serial #F8612 MACHINE SOLD AS IS
United States - Trusted Seller
54" Welex 5 Layer Extrusion Sheet Line
used
- Manufacturer: Welex
54" Welex 5 Layer Extrusion Sheet Line Used 54" Welex 5 layer sheet line consisting of the following: Mcguire blender feeder (1) 3.5" Welex extruder, 36:1 l/d, vent with dc motor and screen changer. (2) 2.5" W...
Cleveland, OH - Trusted Seller
48" Winder
used
48" Winder Used winder, for 48" long rolls, driven by 0.5 DC motor, with controls and SCR on frame, with extra spindle.
Cleveland, OH - Trusted Seller
DABsco Rotary Drum Strip Cooler, Model 9604
used
- Manufacturer: DABsco Equipment Inc
DABsco Rotary Drum Strip Cooler, Model 9604 Used DABsco rotary drum rubber strip cooler, model 9604, with 0.5 hp dc motor drive, built 2004.
Cleveland, OH
Tip: Enter manufacturer, model or keyword
