New Industrial Automation in Switzerland

NEXTAGE®NXA

• Manufacturer: Rollomatic SA

Features Head cameras Both cameras are fixed on the head and allow the robot a global vision, detecting any change in the working environment to adapt itself without realignment. These life-like eyes allow it to ...

Piston Dosing Feeder

• Manufacturer: Balti AG

Supplied by a balti melting plant and based on the balti accumulator principle, the piston dosing unit is used for stationary, non-dynamic dosing. This means that a certain amount of adhesive with a certain press...

Cartridge Melter

• Manufacturer: Balti AG

Cartridge or adhesive without cartridge is placed in the container provided and heated. The adhesive melted at the outlet of the cartridge is pressurized pneumatically and conveyed to the adhesive valve or nozzle...

Spray Nozzles

• Manufacturer: Balti AG

Spray valve with integrated or upstream spray air heating together with the spray nozzle form the spraying system. With air support, the adhesive is lengthened or torn apart when it exits the nozzle and distribut...

Round Nozzles

• Manufacturer: Balti AG

Large, thick, thin, long, short, etc., there are no limits to the nozzle variety. Whether contactless spraying or, as is usually applied (nozzle tip is guided over the surface at a certain height), the type of ad...

Robot Application Systems

• Manufacturer: Balti AG

Single or multiple stations with one robot are practically "everyday life in the bonding industry" today. You determine the type of robot, we build the system for you, run it in and hand over the "turnkey" system...

Plug- / Electrics-Socketing Systems

• Manufacturer: Balti AG

The outstanding machine technology with particularly gentle, controlled melting, conveying and dosing technology is predestined for high-quality process technology for plug and, above all, the ever-increasing ele...

red-y industrial series

Thermal mass flow meters & controllers with IP67 & Ex protection Very accurate and fast measurement / control Analog and digital interface IP67/NEMA6 and ATEX certification

TECHNOSOFT iPOS4850 BX-CAN-STO 11-60V 64A 3kW CANopen/TMLCAN

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply: 11 – 60 VDC / 9 – 36 VDC Output current: 64 A (45ARMS) nominal; 90 A (64ARMS) pea...

TECHNOSOFT iPOS4850 BX-CAT-STO 11-60V 64A 3kW EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless and DC brush motors Motor supply / logic supply / STO supply: 11 – 60 VDC / 9 – 36 VDC / 15 – 36 VDC Output current: 64 A (45ARMS) nomin...

TECHNOSOFT iPOS8015 MZ 12-80V 15ARMS 1kW CANopen or EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless rotary and linear motors, voice coils, DC brush and step motors Motor supply / logic supply / STO supply: 12-80 VDC / 9 – 36 VDC / 18-40...

TECHNOSOFT Micro 4804 MZ 7-48V 4ARMS EtherCAT or CANopen

• Manufacturer: Technosoft

Intelligent, ultra compact and freely programmable motor controller Brushless rotary and linear motors, voice coils and DC brushed and stepper motors Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC Output c...

TECHNOSOFT iMOT233S XM-CAN 12-48V 1.6 Nm Stepper motor CANopen/TMLCAN

• Manufacturer: Technosoft

Stepper motor with embedded drive and motion controller Stepper motor with an integrated freely programmable servo controller High dynamics and efficiency through field-oriented control (FOC) Operating voltage: 1...