New Lathes in Baden-Württemberg, Germany

Precision lathe PD 400

Description Precision lathe PD 400 Center width 400 mm. Center height 85 mm. Center height over support 58 mm. For machining steel, brass, aluminum and plastic. For facing, longitudinal turning, taper turning and...

Precision lathe PD 250/E

Description Machine bed: Made of machine casting with wide-leg prismatic guide. For vibration-free working even under high load. Rear flange for mounting the PF 230 milling machine. Covered lead screw. Headstock:...

Lathe PD 400/CNC

Description Precision lathe PD 400/CNC With ball screws on Z-axis and X-axis and two powerful stepper motors. Control unit for connection to PC or laptop with control of main spindle and stepper motors. Includes ...

GWM IMX 25/32 CNC

• Manufacturer: GWM

Multi-spindle lathe generally overhauled on the basis of an Index MS 25. + Hydraulic pick-up device position 6 + Spindle rinsing of pick-up device (preparation, without HP system) + Braking device for pick-up spi...

GWM S 18-6 AC

• Manufacturer: GWM

Multi-spindle lathe generally overhauled on the basis of a SE 18-6 type Schütte. + Hydraulic pick-up device position 6 + Spindle rinsing device (preparation, without HD system) + Mech. Mech. backworking layer 6 (...

GWM G 20-6 AC/CNC

• Manufacturer: GWM

Multi-spindle lathe generally overhauled on the basis of an AS/GS20-6 type Gildemeister. + Up to 10 numerically controlled axes + Hydraulic gripping device position 6 + Spindle rinsing device (preparation, withou...

Drilling and milling device PF 230

Description Including column (35 x 400 mm), mounting flange and fixing screws (flat milled surface is available on PD 250/E and PD 400). Instead of the steel holder, a corresponding slot table (110 x 70 mm, with ...

Maier PROLINE D / DY

• Manufacturer: Maier

Optimum volume production of complex parts With three independent carriages, 3 tools are in operation simultaneously to facilitate the volume production of complex parts. Front, transverse and reverse side machin...

ML-ProLine C / C5

• Manufacturer: Maier

The economical solution. The economic solution. 7 axes and up to 19 tools. 4-fold machining of reverse side assures minimal downtime. 2-part system: 2 tools operating simultaneously Simultaneous machining on main...

Maier PROLINE A / B

• Manufacturer: Maier

Simple but precise Series A Simple but precise and at an unbeatable price. The ML-ProLine Series A is suitable for the machining of turned parts with simple geometry. Guarantees you maximum amortization for simpl...

Maier PROLINE LINEAR

• Manufacturer: Maier

Ultimate dynamics Linear motors assure ultimate dynamics This model can be equipped with 26 tools and it achieves fast feed rates of 40 m/min. Basic equipment 2-part system: Main spindle, counter-spindle 3 tools ...

Maier PROLINE HYBRID/BASIC

• Manufacturer: Maier

For ultimate demands Whether simple or complex workpieces, ProLine HYBRID/BASIC can satisfy even the highest of standards. The MLK 32/36 Hybrid and the ML 20/26 Basic have a wide range of machining options - all ...

Maier PROLINE E

• Manufacturer: Maier

Short machining cycles for complex workpieces Short machining cycles, even on very complex workpieces. 16-station tool turret, 12 axes and up to 35 tools. 3-part system: 3 tools in operation simultaneously 12 axe...

Maier C6

• Manufacturer: Maier

Economy combined with ultimate precision Very precise, fast and to optimum quality MAIER machine tools were created for high-level metal-working. We develop and manufacture all of our machine tools in-house. This...

Maier PROLINE F2 / F4

• Manufacturer: Maier

The 'high-end machine' for a total machining solution Up to 4 tools can be worked on simultaneously. Depending on equipment variant, with up to 3 tool turrets. Series F2 4-part system: 4 tools operating simultane...