Used Machine Tools in Hesse, Germany

AEG EWSL 175/420

• Manufacturer: AEG

Additional Information Well-maintained double-sided grinder on an L-shaped iron base Accessories 2 new grinding wheels Further Information Grinding wheel dimensions: Diameter 175 mm Width 25 mm Bore 51 mm

MSO KW 550/2000

• Manufacturer: MSO

Additional Information Older, but well-preserved crankshaft grinding machine Accessories Complete electrical and hydraulic equipment, coolant system, 3 steady rests, grinding wheel dressing device, grinding wheel...

1975 CINCINNATI R-119

• Manufacturer: Cincinnati

Additional Features Very well-maintained hydraulic cylindrical grinding machine Accessories Various accessories, copying device, 2 MARPOS measuring devices (for diameter and face measurements) Further Information...

1975 CINCINNATI MILACRON R-77/1000/165

• Manufacturer: Cincinnati
• Model: R-77

Additional Features Used cylindrical grinding machine with internal grinding attachment Accessories Complete electrical and hydraulic equipment, separate coolant system with belt filter, grinding wheel holder and...

1989 SCHANBACHER S 3-50

• Manufacturer: SCHANBACHER

for twist drill bits: 3 - 50 mm Ø Included angle: 90 - 140° adjustable relief angle Grinding motor: 2800 RPM, 0.25 kW Gearmotor for slewing movement: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20/90 x 20 ...

2002 DECKEL MAHO DMU 60T 1113-210055

• Manufacturer: Deckel / Maho
• Model: DMU 60 T

5-axis machine Rotary table B-axis Control type: CNC | Control name: Heidenhain TNC 426/430 | Freight basis: FCA | X-off: 630 mm | Y-off: 560 mm | Z-way: 560 mm | Machine weight approx.: 6,5 t | Number of axes: 5...

GEHRING P350-31P 1113-22432

• Manufacturer: Gehring

Control type: conventional | Freight basis: FCA | Honing: 4-31 mm | Hub: 350 mm | Discharge: 250 mm

1994 DECKEL MAHO DC 70 V 1113-6713

• Manufacturer: Deckel / Maho
• Model: DC70V

Electronic handwheel Chip conveyor Control type: CNC | Control name: Dialog 112 | Freight basis: FCA | X-off: 700 mm | Y-off: 550 mm | Z-way: 500 mm | Total power requirement: kW | Machine weight approx.: t | Spa...

1986 MORI SEIKI MV 45 1113-23031

• Manufacturer: Mori Seiki
• Model: MV-45
• Spindle taper: CAT 40
• Power requirement: 20 kW

Vertical machining center 20kW is the nominal value. The spindle only needs 7.5 kW. It looks like 15kW will be enough.

2002 STAMA MC 536 /S 1113-2100078

• Manufacturer: Stama
• Model: MC
• Power requirement: 36.8 kW

Travel path can be used as a whole or divided into two areas for pendulum machining. 3 axes HSK 100

Clamping angle

Clamping surface: 400 x 400 mm Support surface: 300 x 400 mm Clamping surface with 4 horizontal and vertical T-slots each, for T-nuts: M 12 for groove width: 14 mm Groove spacing: 100 mm Weight: 102 kg

1972 BÜCHE RTW 30

• Manufacturer: BÜCHE

Additional Equipment Used horizontal/vertical rotary table with tailstock for horizontal operation Accessories 1 indexing disk for indirect indexing

FLOTT TS 300

• Manufacturer: Flott
• Model: TS 300

Additional information Used double-sided workshop bench grinder Further information

2000 Mazak VTC 300 C

• Manufacturer: Mazak
• Model: VTC 300C

Control: Mazatrol Fusion 640M Technical data: X-axis: [mm] 1740 Y-axis: [mm] 760 Z-axis: [mm] 660 Max. speed: [1/min] 10.000 spindle motor: [kW] 15 tool holder: SK 40 tool places: 30 Equipment: Chip con...

AEG DWS 400/2200

• Manufacturer: AEG

Additional Heavy-duty double-sided workshop bench grinder Accessories Extraction nozzles on the guards, grinding wheels retained at 80 and 90% Further information