Used Machine Tools in Thuringia, Germany

2007 EBU HK 200 FR

• Manufacturer: EBU
• Model: HK 200 FR

– Hydraulic clutch – Fixed table – Hydraulic overload protection in the ram – Hydraulic connecting rod clamp – Motorized ram height adjustment 120 mm with digital display of the set ram height, rapid and creep sp...

1988 PSM HM 150-1000

• Manufacturer: ambold pressen- und maschinenbau

- Motor-driven - Loop control via sensor - manual spreading - on base plate

1968 IWK HEP 40

• Manufacturer: IWK

2 guide pillars 2 parallel grooves in ram and table, running transversely

1983 SMERAL LEN 25 C

• Manufacturer: Šmeral Brno
• Model: LEN 25 C

- Table clamping plate Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 25 t | Discharge: 225 mm | Hub: 8 - 85 mm | Table dimensions: 560 x 450 mm | Pestle dimensions:...

1984 MÜLLER CD 100.11.69

• Manufacturer: Muller
• Power requirement: 30 kW

- Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and pin clamping piece - Conversion of hydraulics to proportional valve...

Zipper tilting circular saw ZI-WP700TN

Product information "Zipper Tilting Circular Saw ZI-WP700TN". Engine data Motor power S1 in W 5000 (S2 15min) Protection class IP 54 Speed in min-1 1400 Voltage 400V / 3 / 50Hz Cutting capacity Cutting capacity l...

1980 Schuler CR 80-345

• Manufacturer: Schuler
• Model: CR 80-345
• Stroke length: 480 mm

Additional Information: - the machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate control cabinet with touchscreen including cabling * N...

MAXION UNIMAX 3 GL

• Manufacturer: Maxion

Manufacturing stud-bearing threads M4 – M20 Series production Reliable and smooth operation Standard and special threads High-performance thread cutting machine with guide spindle and optimal safety device agains...

MAXION H 15 GL

• Manufacturer: Maxion

Horizontal unit for producing thread-forming thread M3 – M10 Series production Reliable and smooth running Standard and special threads High-performance thread cutting machine as horizontal unit, center height 12...

MAXION BT 36 GL

• Manufacturer: Maxion

Manufacture of thread-cutting lubricated threads M5 – M30 Series production Reliable and smooth running Standard and special threads High-performance threading machine with lead screw and optimal safety device ag...

MAXION UNIMAX 3T GL

• Manufacturer: Maxion

Manufacture of thread-cutting threads M4 – M20 Series production Reliable and quiet operation Standard and special threads High-performance thread cutting machine with guide spindle and optimal safety device agai...

MAXION BT 18 GL

• Manufacturer: Maxion

Production of lead-containing threads M3 – M10 Series production Reliable and smooth running Standard and special threads High-performance – thread cutting machine with leading screw device. Safety device against...

MAXION BS 36 GL

• Manufacturer: Maxion

Manufacturing of thread-cutting machine oil-containing threads M5 – M30 Series production Reliable and quiet operation Standard and special threads High-performance thread cutting machine with lead screw and opti...

MAXION BS 18 GL

• Manufacturer: Maxion

Production of thread-cutting tools M3 – M10 Series production Reliable and smooth running Standard and special threads High-performance – thread-cutting machine with guide spindle device. Safety device against to...

1990 HELMERDING ERH 75 B

• Manufacturer: HELMERDING

Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear train in an oil bath - Fixed table prepared for hanging tool changing consoles - 2 roller strips in the table ...