Ennis, TX
TIN KNOCKER TK JACKETING SHEAR
- Manufacturer: Tin Knocker
TK Jacketing Shear Specifications: Maximum Sheet Width: 48"Table top height or working surface height: 34"
Ennis, TX
GMC ELECTRO MECHANICAL SHEAR EPS-1016E SHEAR
- Manufacturer: GMC
- Model: EPS-1016E
36” front operated power back gauge German SIKO digital readout & fine adjustment wheel 60” long squaring arm with inch / mm scale, mounted on right side of the table with material front out tray Rear lifting s...
Ennis, TX
GMC PL-18E, 18 GA. PITTSBURGH MACHINE | LOCK FORMING MACHINE
- Manufacturer: GMC
ISO 9001 certified 3HP Heavy Duty AC main motor 220V, 3 phase Heavy welded all steel construction for maximum rigidity It’s a Triplex, standard rolls include S & Drive (Slip & Drive Cleat) Drive Cleat, Double...
Ennis, TX
ZIMMERMAN STRUCTURAL ROOFING MACHINE
- Manufacturer: Zimmerman
One set of tooling to form one profile 304 stainless steel tooling Stiffening rib or striation assembly 4,000 lb capacity expandable decoiler with brake & stand Limit switch measuring device Hand-held remote cont...
Ennis, TX
STANDARD INDUSTRIAL SHEAR
- Manufacturer: Standard Industrial
Guillotine Drive System - provides superior strength and durability compared to all other shear drive systems. Quick-Change Blade Gap Adjustment - all models have either manual or power blade gap adjustment for f...
Ennis, TXTIN KNOCKER 1016 HAND BRAKE
- Manufacturer: Tin Knocker
Weight: 3000 lbs Dimensions: 160 x 50 x 60 in Capacity: 16 ga Bend length: 10’1″ Beam lift: 2 1/4″ Bolt on apron angle: incl Counter weight: incl Depth of box or pan: 2″ 3 sides
Ennis, TX
TENNSMITH 52 IN FOOT SHEAR
- Manufacturer: Tennsmith
Type: manual Mild Steel Capacity: 16 gauge (1.6mm) Stainless Capacity: 20 gauge (.9mm) Cutting Length (inches): 52 Weight (pounds): 950 Dimensions (LxWxH): 61 x 36 x 42 These Tennsmith kick shears (sometimes call...
Ennis, TX
R-K PRESS BRAKE 90 DEGREE DIES
- Manufacturer: RK Press Brake Dies
L-2 die - the l-2 die is used to form 90-degree and greater bends. By adjusting the ram, the depth of the punch travel can be regulated to produce the desired angle of bend. L-3 die - gooseneck puches are used to...
Ennis, TX
BRAVO OVALIZER DUCT MACHINE
- Manufacturer: red river machinery
Material thickness 0.4 – 1.2 mm (26 ga- 18 ga.) galvanized steel Effective length 120″ (3 m)
Ennis, TX
FLAGLER DUCT FLANGE MACHINE
- Manufacturer: Flagler
Speed: 60 fpm (optional up to 100 fpm)Gauge Capacity: 18-26 Gauge Galvanized12 Stations - DF114 Stations - DF21-1/2" dia. (at bearing) Hardened and Ground SpindlesHardened Feed GaugeRise/Fall Short Parts Feeder7-...
Ennis, TX
LIBERTY INDUSTRIAL AND PORTABLE DOWNSPOUT MACHINE
- Manufacturer: red river machinery
New liberty industrial and portable downspout machine Commercial and portable downspout & elbow machines Pipe size: 2”x 3”; 3” x 3”; 3”x 4” 3” round 4” round Custom (each machine does one size and configuration) ...
Ennis, TX
ROPER WHITNEY 10M14 SHEAR
- Manufacturer: Roper Whitney
The 10M14 capacity is 14-gauge mild steel, 18-gauge stainless up to 121.25 inches in cutting length. The 10M14 Series shears are standard with an two edge interchangeable top and bottom, high carbon, high chrome ...
Ennis, TX
R-K PRESS BRAKE 90 DEGREE PUNCHES
- Manufacturer: RK Press Brake Dies
U-2 punch - the u-2 punch is used to form 90-degree and greater bends. By adjusting the ram, the depth of the punch travel can be regulated to produce the desired angle of bend. U-3 punch - the u-3 punch is used ...
Ennis, TX
LIBERTY INDUSTRIAL AUTOMATIC ELBOW MACHINE
- Manufacturer: StanGroup
New liberty industrial automatic elbow machine Industrial automatic elbow machine designed to produce square and round downspout and hvac elbows with seamed and welded ducts. Final product widely used in downspou...
Ennis, TX
Tip: Enter manufacturer, model or keyword
