Used Materials Testing in Germany

UV lamp OP 201 Profi
- Manufacturer: Laempe / Röperwerk
Product information "UV lamp OP 201 Profi" UV hand lamp OP 201 Battery-operated hand lamp with mains / 12 volt adapter Auxiliary light (white) and 2 x UV LEDs IP 53 housing, risk class DGZfP EM6 / BGFE 2 2 year g...
$1,168 USD
Münster, Germany
UVA Hand Hoenle 250 GS
- Manufacturer: Honle
Product information "UVA Hand Hoenle 250 GS" TCP UV Hand Hoenle 250 GS Hand lamp with ballast Technical data:Supply : 90 - 264 V AC / 47 - 63 Hz Intensity **): 365 nm: 200 mW/cm² 405 nm: 350 mW/cm² - no edge filt...
$1,373 USD
Münster, Germany
UV LED lamp UV 128
- Manufacturer: Laempe / Röperwerk
Product information "UV LED lamp UV 128" UV LED lamp UV 128 128 UV LED with 375 nm
$763 USD
Münster, Germany
+GF+ - GEORG FISCHER PNF / PZS
- Manufacturer: Georg Fischer
electric heating plate, power consumption 445 W, timer, test specimen tube, test specimen ring, ram base, control unit with thermal printer and strength manometer
Meinerzhagen, Germany
Image quality indicators ASTM Set A-B-C - CU
- Manufacturer: Unknown
Image quality test body ASTM set *A-B-C* CU material group: copper bar length 50mm with pouch and certificate
Münster, Germany
+GF+ - GEORG FISCHER SPE
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushing, ram base, ejector, reading scale
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPE
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushing, ram base, ejector, reading scale
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PRP
- Manufacturer: Georg Fischer
Standard test cylinder production by vibratory pressing, pressing pressure 1 kp/cm²
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
Adjustment body stair step: 9 steps; 2 - 10 mm; 20 x 20 mm
- Manufacturer: Unknown
Adjusting block step 2 - 10 mm ; Width: 20 mmIncrements: 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 (in mm); Material: S355 RG J0 Test body for measurement by coating
Münster, Germany
Inductive white light LED light element
- Manufacturer: Unknown
Inductive white light LED lighting element | Swiveling head The white light element allows you to simultaneously illuminate the test area with colored magnetic powders during the material test, thus freeing up on...
Münster, Germany
BNIF plates
Product information "BNIF plates" Comparison plates for testing surface roughness in accordance with EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case
$1,467 USD
Münster, Germany
Trusted Seller
Auction
TBT - ML 300-4-1450 - Deep Hole Drilling Machine
- Manufacturer: TBT
- Model: ML
Technical data according to data sheet: Drilling method: Lip drilling (ELB) Number of Spindles: 4 Spindle spacing: 120mm Center height above floor: 1,150 mm Drill carriage stroke: 1,450 mm Drilling depth approx.:...
Bad Emstal, Germany
Visit Auction Website
Trusted Seller
Sotax AT 7 Smart V
- Manufacturer: Sotax
Sotax dissolution tester AT 7 Smart. 7 stirring positions. Temperature sensor. Film control panel with numeric keypad. LCD display. 230 V. 50/60 Hz. 1100 W. manufacturer: Sotax model: AT 7 annotation: Documents E...
$4,460 USD
Burladingen, Germany