New Rolling Mills (Metalworking)

11.8″ (300 mm) ERWTech/UCG Rolling Mill #3926

3926 ERWTech/UCG CRM-280 2021-CRM-4 2021 (2) Motors, 2 HP (1.5KW) each The cold rolling process reduces the material thickness before entering the tube mill, resulting in increased yields, tighter tolerances, and...

2010 LAUENER TECHNOLOGY Hydraulic Aluminum Roughing Mill

• Manufacturer: LAUENER TECHNOLOGY

Manufacture - Lauener Technology - Switzerland - This mill was built new in 2010 to test Lauener's new version of a Block Caster - It has VERY few hours of operation - Condition = excellent Roll Size - Diameter:...

Trilogy LEMAS 5′ x 10ga Plate Rolls

• Manufacturer: Lemas

Call for Status and Pricing New, Direct-Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more!

Pittsburgh Lock Roll Formers

The Pittsburgh lock revolutionized the HVAC industry in the late 1940’s and is still used today for its strength and ease in assembling ductwork. And for nearly that long, the Lockformer Pittsburgh Lock Roll Form...

Mestek Engel 800 Series | Slip and Drive Roll Former

• Manufacturer: Engel

Call for Status and Pricing ● Standard with extended roll shafts for mounting auxiliary rolls, one side outboard only ● “S” and drive cleat roll set included inboard ● No opening rolls required ● Eight (8) statio...

Flagler Model H-2 1/2-7 (45 FPM) 17-H045

• Manufacturer: Flagler

Call for Status and Pricing This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below. Speed: 30 to 100 feet pe...

Flagler Model H-2 1/2-10 (45 fpm) 21-H045

• Manufacturer: Flagler

Call for Status and Pricing This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.

Rollformer Panformer VS-150

• Manufacturer: Rollformer

Call for Status and Pricing ● 120V AC ● Hydraulic drive and shear ● Adjustable width — 9″-24″ panels ● Form 22g – 26g steel ● Form .032″ aluminum ● Form 12-20 oz. copper ● Quick & Easy profile changes!

KWM Gutterman KWM IronMan 6″ Junior Seamless Rollformer

• Manufacturer: KWM Gutterman

Call for Status and Pricing ● Eliminates the need to load coil prior to transportation (less material waste) ● Eliminates slippage from cold weather and condensation

Flagler Model H-2 1/2-7 (100 FPM) 17-H100

• Manufacturer: Flagler

Call for Status and Pricing This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below. Speed: 30 to 100 feet pe...

Rollformer 5V Crimp Panel hydraulic panformer

• Manufacturer: Rollformer

Call for Status and Pricing Although originally an agricultural panel, 5V crimp is now a popular residential panel. Mount it in your shop or make it portable and take it to the jobsite. The 5V machine features...

KWM Gutterman KWM IronMan 6″ Half-Round Gen 2

• Manufacturer: KWM Gutterman

Call for Status and Pricing ● 3 station polyurethane drive train integral to forming rollers ● Rollform a broad range of materials (aluminum, copper, steel) ● Rollform 24 gauge steel

KWM Gutterman KWM IronMan 5/6″ Combo Seamless Rollformer

• Manufacturer: KWM Gutterman

Call for Status and Pricing ● Eliminates the need to load coil prior to transportation (less material waste) ● Rollform 24 gauge steel ● Eliminates slippage from cold weather and condensation